From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/soc/qcom/Kconfig | 251 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 251 insertions(+) create mode 100644 drivers/soc/qcom/Kconfig (limited to 'drivers/soc/qcom/Kconfig') diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig new file mode 100644 index 000000000..ae504c43d --- /dev/null +++ b/drivers/soc/qcom/Kconfig @@ -0,0 +1,251 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# QCOM Soc drivers +# +menu "Qualcomm SoC drivers" + +config QCOM_AOSS_QMP + tristate "Qualcomm AOSS Driver" + depends on ARCH_QCOM || COMPILE_TEST + depends on MAILBOX + depends on COMMON_CLK && PM + select PM_GENERIC_DOMAINS + help + This driver provides the means of communicating with and controlling + the low-power state for resources related to the remoteproc + subsystems as well as controlling the debug clocks exposed by the Always On + Subsystem (AOSS) using Qualcomm Messaging Protocol (QMP). + +config QCOM_COMMAND_DB + tristate "Qualcomm Command DB" + depends on ARCH_QCOM || COMPILE_TEST + depends on OF_RESERVED_MEM + help + Command DB queries shared memory by key string for shared system + resources. Platform drivers that require to set state of a shared + resource on a RPM-hardened platform must use this database to get + SoC specific identifier and information for the shared resources. + +config QCOM_CPR + tristate "QCOM Core Power Reduction (CPR) support" + depends on ARCH_QCOM && HAS_IOMEM + select PM_OPP + select REGMAP + help + Say Y here to enable support for the CPR hardware found on Qualcomm + SoCs like QCS404. + + This driver populates CPU OPPs tables and makes adjustments to the + tables based on feedback from the CPR hardware. If you want to do + CPUfrequency scaling say Y here. + + To compile this driver as a module, choose M here: the module will + be called qcom-cpr + +config QCOM_GENI_SE + tristate "QCOM GENI Serial Engine Driver" + depends on ARCH_QCOM || COMPILE_TEST + help + This driver is used to manage Generic Interface (GENI) firmware based + Qualcomm Technologies, Inc. Universal Peripheral (QUP) Wrapper. This + driver is also used to manage the common aspects of multiple Serial + Engines present in the QUP. + +config QCOM_GSBI + tristate "QCOM General Serial Bus Interface" + depends on ARCH_QCOM || COMPILE_TEST + select MFD_SYSCON + help + Say y here to enable GSBI support. The GSBI provides control + functions for connecting the underlying serial UART, SPI, and I2C + devices to the output pins. + +config QCOM_LLCC + tristate "Qualcomm Technologies, Inc. LLCC driver" + depends on ARCH_QCOM || COMPILE_TEST + select REGMAP_MMIO + help + Qualcomm Technologies, Inc. platform specific + Last Level Cache Controller(LLCC) driver for platforms such as, + SDM845. This provides interfaces to clients that use the LLCC. + Say yes here to enable LLCC slice driver. + +config QCOM_KRYO_L2_ACCESSORS + bool + depends on ARCH_QCOM && ARM64 || COMPILE_TEST + +config QCOM_MDT_LOADER + tristate + select QCOM_SCM + +config QCOM_OCMEM + tristate "Qualcomm On Chip Memory (OCMEM) driver" + depends on ARCH_QCOM + select QCOM_SCM + help + The On Chip Memory (OCMEM) allocator allows various clients to + allocate memory from OCMEM based on performance, latency and power + requirements. This is typically used by the GPU, camera/video, and + audio components on some Snapdragon SoCs. + +config QCOM_PDR_HELPERS + tristate + select QCOM_QMI_HELPERS + +config QCOM_QMI_HELPERS + tristate + depends on NET + +config QCOM_RMTFS_MEM + tristate "Qualcomm Remote Filesystem memory driver" + depends on ARCH_QCOM + select QCOM_SCM + help + The Qualcomm remote filesystem memory driver is used for allocating + and exposing regions of shared memory with remote processors for the + purpose of exchanging sector-data between the remote filesystem + service and its clients. + + Say y here if you intend to boot the modem remoteproc. + +config QCOM_RPMH + tristate "Qualcomm RPM-Hardened (RPMH) Communication" + depends on ARCH_QCOM || COMPILE_TEST + depends on (QCOM_COMMAND_DB || !QCOM_COMMAND_DB) + help + Support for communication with the hardened-RPM blocks in + Qualcomm Technologies Inc (QTI) SoCs. RPMH communication uses an + internal bus to transmit state requests for shared resources. A set + of hardware components aggregate requests for these resources and + help apply the aggregated state on the resource. + +config QCOM_RPMHPD + tristate "Qualcomm RPMh Power domain driver" + depends on QCOM_RPMH && QCOM_COMMAND_DB + help + QCOM RPMh Power domain driver to support power-domains with + performance states. The driver communicates a performance state + value to RPMh which then translates it into corresponding voltage + for the voltage rail. + +config QCOM_RPMPD + tristate "Qualcomm RPM Power domain driver" + depends on PM && OF + depends on QCOM_SMD_RPM + select PM_GENERIC_DOMAINS + select PM_GENERIC_DOMAINS_OF + help + QCOM RPM Power domain driver to support power-domains with + performance states. The driver communicates a performance state + value to RPM which then translates it into corresponding voltage + for the voltage rail. + +config QCOM_SMEM + tristate "Qualcomm Shared Memory Manager (SMEM)" + depends on ARCH_QCOM || COMPILE_TEST + depends on HWSPINLOCK + help + Say y here to enable support for the Qualcomm Shared Memory Manager. + The driver provides an interface to items in a heap shared among all + processors in a Qualcomm platform. + +config QCOM_SMD_RPM + tristate "Qualcomm Resource Power Manager (RPM) over SMD" + depends on ARCH_QCOM || COMPILE_TEST + depends on RPMSG + help + If you say yes to this option, support will be included for the + Resource Power Manager system found in the Qualcomm 8974 based + devices. + + This is required to access many regulators, clocks and bus + frequencies controlled by the RPM on these devices. + + Say M here if you want to include support for the Qualcomm RPM as a + module. This will build a module called "qcom-smd-rpm". + +config QCOM_SMEM_STATE + bool + +config QCOM_SMP2P + tristate "Qualcomm Shared Memory Point to Point support" + depends on MAILBOX + depends on QCOM_SMEM + select QCOM_SMEM_STATE + select IRQ_DOMAIN + help + Say yes here to support the Qualcomm Shared Memory Point to Point + protocol. + +config QCOM_SMSM + tristate "Qualcomm Shared Memory State Machine" + depends on QCOM_SMEM + select QCOM_SMEM_STATE + select IRQ_DOMAIN + help + Say yes here to support the Qualcomm Shared Memory State Machine. + The state machine is represented by bits in shared memory. + +config QCOM_SOCINFO + tristate "Qualcomm socinfo driver" + depends on QCOM_SMEM + select SOC_BUS + help + Say yes here to support the Qualcomm socinfo driver, providing + information about the SoC to user space. + +config QCOM_SPM + tristate "Qualcomm Subsystem Power Manager (SPM)" + depends on ARCH_QCOM || COMPILE_TEST + select QCOM_SCM + help + Enable the support for the Qualcomm Subsystem Power Manager, used + to manage cores, L2 low power modes and to configure the internal + Adaptive Voltage Scaler parameters, where supported. + +config QCOM_STATS + tristate "Qualcomm Technologies, Inc. (QTI) Sleep stats driver" + depends on (ARCH_QCOM && DEBUG_FS) || COMPILE_TEST + depends on QCOM_SMEM + help + Qualcomm Technologies, Inc. (QTI) Sleep stats driver to read + the shared memory exported by the remote processor related to + various SoC level low power modes statistics and export to debugfs + interface. + +config QCOM_WCNSS_CTRL + tristate "Qualcomm WCNSS control driver" + depends on ARCH_QCOM || COMPILE_TEST + depends on RPMSG + help + Client driver for the WCNSS_CTRL SMD channel, used to download nv + firmware to a newly booted WCNSS chip. + +config QCOM_APR + tristate "Qualcomm APR/GPR Bus (Asynchronous/Generic Packet Router)" + depends on ARCH_QCOM || COMPILE_TEST + depends on RPMSG + depends on NET + select QCOM_PDR_HELPERS + help + Enable APR IPC protocol support between + application processor and QDSP6. APR is + used by audio driver to configure QDSP6 + ASM, ADM and AFE modules. + +config QCOM_ICC_BWMON + tristate "QCOM Interconnect Bandwidth Monitor driver" + depends on ARCH_QCOM || COMPILE_TEST + select PM_OPP + select REGMAP_MMIO + help + Sets up driver monitoring bandwidth on various interconnects and + based on that voting for interconnect bandwidth, adjusting their + speed to current demand. + Current implementation brings support for BWMON v4, used for example + on SDM845 to measure bandwidth between CPU (gladiator_noc) and Last + Level Cache (memnoc). Usage of this BWMON allows to remove some of + the fixed bandwidth votes from cpufreq (CPU nodes) thus achieve high + memory throughput even with lower CPU frequencies. + +endmenu -- cgit v1.2.3