From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/soc/qcom/smd-rpm.c | 280 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 280 insertions(+) create mode 100644 drivers/soc/qcom/smd-rpm.c (limited to 'drivers/soc/qcom/smd-rpm.c') diff --git a/drivers/soc/qcom/smd-rpm.c b/drivers/soc/qcom/smd-rpm.c new file mode 100644 index 000000000..7e3b6a7ea --- /dev/null +++ b/drivers/soc/qcom/smd-rpm.c @@ -0,0 +1,280 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2015, Sony Mobile Communications AB. + * Copyright (c) 2012-2013, The Linux Foundation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#define RPM_REQUEST_TIMEOUT (5 * HZ) + +/** + * struct qcom_smd_rpm - state of the rpm device driver + * @rpm_channel: reference to the smd channel + * @icc: interconnect proxy device + * @dev: rpm device + * @ack: completion for acks + * @lock: mutual exclusion around the send/complete pair + * @ack_status: result of the rpm request + */ +struct qcom_smd_rpm { + struct rpmsg_endpoint *rpm_channel; + struct platform_device *icc; + struct device *dev; + + struct completion ack; + struct mutex lock; + int ack_status; +}; + +/** + * struct qcom_rpm_header - header for all rpm requests and responses + * @service_type: identifier of the service + * @length: length of the payload + */ +struct qcom_rpm_header { + __le32 service_type; + __le32 length; +}; + +/** + * struct qcom_rpm_request - request message to the rpm + * @msg_id: identifier of the outgoing message + * @flags: active/sleep state flags + * @type: resource type + * @id: resource id + * @data_len: length of the payload following this header + */ +struct qcom_rpm_request { + __le32 msg_id; + __le32 flags; + __le32 type; + __le32 id; + __le32 data_len; +}; + +/** + * struct qcom_rpm_message - response message from the rpm + * @msg_type: indicator of the type of message + * @length: the size of this message, including the message header + * @msg_id: message id + * @message: textual message from the rpm + * + * Multiple of these messages can be stacked in an rpm message. + */ +struct qcom_rpm_message { + __le32 msg_type; + __le32 length; + union { + __le32 msg_id; + DECLARE_FLEX_ARRAY(u8, message); + }; +}; + +#define RPM_SERVICE_TYPE_REQUEST 0x00716572 /* "req\0" */ + +#define RPM_MSG_TYPE_ERR 0x00727265 /* "err\0" */ +#define RPM_MSG_TYPE_MSG_ID 0x2367736d /* "msg#" */ + +/** + * qcom_rpm_smd_write - write @buf to @type:@id + * @rpm: rpm handle + * @state: active/sleep state flags + * @type: resource type + * @id: resource identifier + * @buf: the data to be written + * @count: number of bytes in @buf + */ +int qcom_rpm_smd_write(struct qcom_smd_rpm *rpm, + int state, + u32 type, u32 id, + void *buf, + size_t count) +{ + static unsigned msg_id = 1; + int left; + int ret; + struct { + struct qcom_rpm_header hdr; + struct qcom_rpm_request req; + u8 payload[]; + } *pkt; + size_t size = sizeof(*pkt) + count; + + /* SMD packets to the RPM may not exceed 256 bytes */ + if (WARN_ON(size >= 256)) + return -EINVAL; + + pkt = kmalloc(size, GFP_KERNEL); + if (!pkt) + return -ENOMEM; + + mutex_lock(&rpm->lock); + + pkt->hdr.service_type = cpu_to_le32(RPM_SERVICE_TYPE_REQUEST); + pkt->hdr.length = cpu_to_le32(sizeof(struct qcom_rpm_request) + count); + + pkt->req.msg_id = cpu_to_le32(msg_id++); + pkt->req.flags = cpu_to_le32(state); + pkt->req.type = cpu_to_le32(type); + pkt->req.id = cpu_to_le32(id); + pkt->req.data_len = cpu_to_le32(count); + memcpy(pkt->payload, buf, count); + + ret = rpmsg_send(rpm->rpm_channel, pkt, size); + if (ret) + goto out; + + left = wait_for_completion_timeout(&rpm->ack, RPM_REQUEST_TIMEOUT); + if (!left) + ret = -ETIMEDOUT; + else + ret = rpm->ack_status; + +out: + kfree(pkt); + mutex_unlock(&rpm->lock); + return ret; +} +EXPORT_SYMBOL(qcom_rpm_smd_write); + +static int qcom_smd_rpm_callback(struct rpmsg_device *rpdev, + void *data, + int count, + void *priv, + u32 addr) +{ + const struct qcom_rpm_header *hdr = data; + size_t hdr_length = le32_to_cpu(hdr->length); + const struct qcom_rpm_message *msg; + struct qcom_smd_rpm *rpm = dev_get_drvdata(&rpdev->dev); + const u8 *buf = data + sizeof(struct qcom_rpm_header); + const u8 *end = buf + hdr_length; + char msgbuf[32]; + int status = 0; + u32 len, msg_length; + + if (le32_to_cpu(hdr->service_type) != RPM_SERVICE_TYPE_REQUEST || + hdr_length < sizeof(struct qcom_rpm_message)) { + dev_err(rpm->dev, "invalid request\n"); + return 0; + } + + while (buf < end) { + msg = (struct qcom_rpm_message *)buf; + msg_length = le32_to_cpu(msg->length); + switch (le32_to_cpu(msg->msg_type)) { + case RPM_MSG_TYPE_MSG_ID: + break; + case RPM_MSG_TYPE_ERR: + len = min_t(u32, ALIGN(msg_length, 4), sizeof(msgbuf)); + memcpy_fromio(msgbuf, msg->message, len); + msgbuf[len - 1] = 0; + + if (!strcmp(msgbuf, "resource does not exist")) + status = -ENXIO; + else + status = -EINVAL; + break; + } + + buf = PTR_ALIGN(buf + 2 * sizeof(u32) + msg_length, 4); + } + + rpm->ack_status = status; + complete(&rpm->ack); + return 0; +} + +static int qcom_smd_rpm_probe(struct rpmsg_device *rpdev) +{ + struct qcom_smd_rpm *rpm; + int ret; + + rpm = devm_kzalloc(&rpdev->dev, sizeof(*rpm), GFP_KERNEL); + if (!rpm) + return -ENOMEM; + + mutex_init(&rpm->lock); + init_completion(&rpm->ack); + + rpm->dev = &rpdev->dev; + rpm->rpm_channel = rpdev->ept; + dev_set_drvdata(&rpdev->dev, rpm); + + rpm->icc = platform_device_register_data(&rpdev->dev, "icc_smd_rpm", -1, + NULL, 0); + if (IS_ERR(rpm->icc)) + return PTR_ERR(rpm->icc); + + ret = of_platform_populate(rpdev->dev.of_node, NULL, NULL, &rpdev->dev); + if (ret) + platform_device_unregister(rpm->icc); + + return ret; +} + +static void qcom_smd_rpm_remove(struct rpmsg_device *rpdev) +{ + struct qcom_smd_rpm *rpm = dev_get_drvdata(&rpdev->dev); + + platform_device_unregister(rpm->icc); + of_platform_depopulate(&rpdev->dev); +} + +static const struct of_device_id qcom_smd_rpm_of_match[] = { + { .compatible = "qcom,rpm-apq8084" }, + { .compatible = "qcom,rpm-ipq6018" }, + { .compatible = "qcom,rpm-msm8226" }, + { .compatible = "qcom,rpm-msm8909" }, + { .compatible = "qcom,rpm-msm8916" }, + { .compatible = "qcom,rpm-msm8936" }, + { .compatible = "qcom,rpm-msm8953" }, + { .compatible = "qcom,rpm-msm8974" }, + { .compatible = "qcom,rpm-msm8976" }, + { .compatible = "qcom,rpm-msm8994" }, + { .compatible = "qcom,rpm-msm8996" }, + { .compatible = "qcom,rpm-msm8998" }, + { .compatible = "qcom,rpm-sdm660" }, + { .compatible = "qcom,rpm-sm6115" }, + { .compatible = "qcom,rpm-sm6125" }, + { .compatible = "qcom,rpm-sm6375" }, + { .compatible = "qcom,rpm-qcm2290" }, + { .compatible = "qcom,rpm-qcs404" }, + {} +}; +MODULE_DEVICE_TABLE(of, qcom_smd_rpm_of_match); + +static struct rpmsg_driver qcom_smd_rpm_driver = { + .probe = qcom_smd_rpm_probe, + .remove = qcom_smd_rpm_remove, + .callback = qcom_smd_rpm_callback, + .drv = { + .name = "qcom_smd_rpm", + .of_match_table = qcom_smd_rpm_of_match, + }, +}; + +static int __init qcom_smd_rpm_init(void) +{ + return register_rpmsg_driver(&qcom_smd_rpm_driver); +} +arch_initcall(qcom_smd_rpm_init); + +static void __exit qcom_smd_rpm_exit(void) +{ + unregister_rpmsg_driver(&qcom_smd_rpm_driver); +} +module_exit(qcom_smd_rpm_exit); + +MODULE_AUTHOR("Bjorn Andersson "); +MODULE_DESCRIPTION("Qualcomm SMD backed RPM driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3