From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/soc/tegra/regulators-tegra20.c | 560 +++++++++++++++++++++++++++++++++ 1 file changed, 560 insertions(+) create mode 100644 drivers/soc/tegra/regulators-tegra20.c (limited to 'drivers/soc/tegra/regulators-tegra20.c') diff --git a/drivers/soc/tegra/regulators-tegra20.c b/drivers/soc/tegra/regulators-tegra20.c new file mode 100644 index 000000000..6a2f90ab9 --- /dev/null +++ b/drivers/soc/tegra/regulators-tegra20.c @@ -0,0 +1,560 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Voltage regulators coupler for NVIDIA Tegra20 + * Copyright (C) 2019 GRATE-DRIVER project + * + * Voltage constraints borrowed from downstream kernel sources + * Copyright (C) 2010-2011 NVIDIA Corporation + */ + +#define pr_fmt(fmt) "tegra voltage-coupler: " fmt + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +struct tegra_regulator_coupler { + struct regulator_coupler coupler; + struct regulator_dev *core_rdev; + struct regulator_dev *cpu_rdev; + struct regulator_dev *rtc_rdev; + struct notifier_block reboot_notifier; + struct notifier_block suspend_notifier; + int core_min_uV, cpu_min_uV; + bool sys_reboot_mode_req; + bool sys_reboot_mode; + bool sys_suspend_mode_req; + bool sys_suspend_mode; +}; + +static inline struct tegra_regulator_coupler * +to_tegra_coupler(struct regulator_coupler *coupler) +{ + return container_of(coupler, struct tegra_regulator_coupler, coupler); +} + +static int tegra20_core_limit(struct tegra_regulator_coupler *tegra, + struct regulator_dev *core_rdev) +{ + int core_min_uV = 0; + int core_max_uV; + int core_cur_uV; + int err; + + /* + * Tegra20 SoC has critical DVFS-capable devices that are + * permanently-active or active at a boot time, like EMC + * (DRAM controller) or Display controller for example. + * + * The voltage of a CORE SoC power domain shall not be dropped below + * a minimum level, which is determined by device's clock rate. + * This means that we can't fully allow CORE voltage scaling until + * the state of all DVFS-critical CORE devices is synced. + */ + if (tegra_pmc_core_domain_state_synced() && !tegra->sys_reboot_mode) { + pr_info_once("voltage state synced\n"); + return 0; + } + + if (tegra->core_min_uV > 0) + return tegra->core_min_uV; + + core_cur_uV = regulator_get_voltage_rdev(core_rdev); + if (core_cur_uV < 0) + return core_cur_uV; + + core_max_uV = max(core_cur_uV, 1200000); + + err = regulator_check_voltage(core_rdev, &core_min_uV, &core_max_uV); + if (err) + return err; + + /* + * Limit minimum CORE voltage to a value left from bootloader or, + * if it's unreasonably low value, to the most common 1.2v or to + * whatever maximum value defined via board's device-tree. + */ + tegra->core_min_uV = core_max_uV; + + pr_info("core voltage initialized to %duV\n", tegra->core_min_uV); + + return tegra->core_min_uV; +} + +static int tegra20_core_rtc_max_spread(struct regulator_dev *core_rdev, + struct regulator_dev *rtc_rdev) +{ + struct coupling_desc *c_desc = &core_rdev->coupling_desc; + struct regulator_dev *rdev; + int max_spread; + unsigned int i; + + for (i = 1; i < c_desc->n_coupled; i++) { + max_spread = core_rdev->constraints->max_spread[i - 1]; + rdev = c_desc->coupled_rdevs[i]; + + if (rdev == rtc_rdev && max_spread) + return max_spread; + } + + pr_err_once("rtc-core max-spread is undefined in device-tree\n"); + + return 150000; +} + +static int tegra20_cpu_nominal_uV(void) +{ + switch (tegra_sku_info.soc_speedo_id) { + case 0: + return 1100000; + case 1: + return 1025000; + default: + return 1125000; + } +} + +static int tegra20_core_nominal_uV(void) +{ + switch (tegra_sku_info.soc_speedo_id) { + default: + return 1225000; + case 2: + return 1300000; + } +} + +static int tegra20_core_rtc_update(struct tegra_regulator_coupler *tegra, + struct regulator_dev *core_rdev, + struct regulator_dev *rtc_rdev, + int cpu_uV, int cpu_min_uV) +{ + int core_min_uV, core_max_uV = INT_MAX; + int rtc_min_uV, rtc_max_uV = INT_MAX; + int core_target_uV; + int rtc_target_uV; + int max_spread; + int core_uV; + int rtc_uV; + int err; + + /* + * RTC and CORE voltages should be no more than 170mV from each other, + * CPU should be below RTC and CORE by at least 120mV. This applies + * to all Tegra20 SoC's. + */ + max_spread = tegra20_core_rtc_max_spread(core_rdev, rtc_rdev); + + /* + * The core voltage scaling is currently not hooked up in drivers, + * hence we will limit the minimum core voltage to a reasonable value. + * This should be good enough for the time being. + */ + core_min_uV = tegra20_core_limit(tegra, core_rdev); + if (core_min_uV < 0) + return core_min_uV; + + err = regulator_check_voltage(core_rdev, &core_min_uV, &core_max_uV); + if (err) + return err; + + err = regulator_check_consumers(core_rdev, &core_min_uV, &core_max_uV, + PM_SUSPEND_ON); + if (err) + return err; + + /* prepare voltage level for suspend */ + if (tegra->sys_suspend_mode) + core_min_uV = clamp(tegra20_core_nominal_uV(), + core_min_uV, core_max_uV); + + core_uV = regulator_get_voltage_rdev(core_rdev); + if (core_uV < 0) + return core_uV; + + core_min_uV = max(cpu_min_uV + 125000, core_min_uV); + if (core_min_uV > core_max_uV) + return -EINVAL; + + if (cpu_uV + 120000 > core_uV) + pr_err("core-cpu voltage constraint violated: %d %d\n", + core_uV, cpu_uV + 120000); + + rtc_uV = regulator_get_voltage_rdev(rtc_rdev); + if (rtc_uV < 0) + return rtc_uV; + + if (cpu_uV + 120000 > rtc_uV) + pr_err("rtc-cpu voltage constraint violated: %d %d\n", + rtc_uV, cpu_uV + 120000); + + if (abs(core_uV - rtc_uV) > 170000) + pr_err("core-rtc voltage constraint violated: %d %d\n", + core_uV, rtc_uV); + + rtc_min_uV = max(cpu_min_uV + 125000, core_min_uV - max_spread); + + err = regulator_check_voltage(rtc_rdev, &rtc_min_uV, &rtc_max_uV); + if (err) + return err; + + while (core_uV != core_min_uV || rtc_uV != rtc_min_uV) { + if (core_uV < core_min_uV) { + core_target_uV = min(core_uV + max_spread, core_min_uV); + core_target_uV = min(rtc_uV + max_spread, core_target_uV); + } else { + core_target_uV = max(core_uV - max_spread, core_min_uV); + core_target_uV = max(rtc_uV - max_spread, core_target_uV); + } + + if (core_uV == core_target_uV) + goto update_rtc; + + err = regulator_set_voltage_rdev(core_rdev, + core_target_uV, + core_max_uV, + PM_SUSPEND_ON); + if (err) + return err; + + core_uV = core_target_uV; +update_rtc: + if (rtc_uV < rtc_min_uV) { + rtc_target_uV = min(rtc_uV + max_spread, rtc_min_uV); + rtc_target_uV = min(core_uV + max_spread, rtc_target_uV); + } else { + rtc_target_uV = max(rtc_uV - max_spread, rtc_min_uV); + rtc_target_uV = max(core_uV - max_spread, rtc_target_uV); + } + + if (rtc_uV == rtc_target_uV) + continue; + + err = regulator_set_voltage_rdev(rtc_rdev, + rtc_target_uV, + rtc_max_uV, + PM_SUSPEND_ON); + if (err) + return err; + + rtc_uV = rtc_target_uV; + } + + return 0; +} + +static int tegra20_core_voltage_update(struct tegra_regulator_coupler *tegra, + struct regulator_dev *cpu_rdev, + struct regulator_dev *core_rdev, + struct regulator_dev *rtc_rdev) +{ + int cpu_uV; + + cpu_uV = regulator_get_voltage_rdev(cpu_rdev); + if (cpu_uV < 0) + return cpu_uV; + + return tegra20_core_rtc_update(tegra, core_rdev, rtc_rdev, + cpu_uV, cpu_uV); +} + +static int tegra20_cpu_voltage_update(struct tegra_regulator_coupler *tegra, + struct regulator_dev *cpu_rdev, + struct regulator_dev *core_rdev, + struct regulator_dev *rtc_rdev) +{ + int cpu_min_uV_consumers = 0; + int cpu_max_uV = INT_MAX; + int cpu_min_uV = 0; + int cpu_uV; + int err; + + err = regulator_check_voltage(cpu_rdev, &cpu_min_uV, &cpu_max_uV); + if (err) + return err; + + err = regulator_check_consumers(cpu_rdev, &cpu_min_uV, &cpu_max_uV, + PM_SUSPEND_ON); + if (err) + return err; + + err = regulator_check_consumers(cpu_rdev, &cpu_min_uV_consumers, + &cpu_max_uV, PM_SUSPEND_ON); + if (err) + return err; + + cpu_uV = regulator_get_voltage_rdev(cpu_rdev); + if (cpu_uV < 0) + return cpu_uV; + + /* store boot voltage level */ + if (!tegra->cpu_min_uV) + tegra->cpu_min_uV = cpu_uV; + + /* + * CPU's regulator may not have any consumers, hence the voltage + * must not be changed in that case because CPU simply won't + * survive the voltage drop if it's running on a higher frequency. + */ + if (!cpu_min_uV_consumers) + cpu_min_uV = cpu_uV; + + /* restore boot voltage level */ + if (tegra->sys_reboot_mode) + cpu_min_uV = max(cpu_min_uV, tegra->cpu_min_uV); + + /* prepare voltage level for suspend */ + if (tegra->sys_suspend_mode) + cpu_min_uV = clamp(tegra20_cpu_nominal_uV(), + cpu_min_uV, cpu_max_uV); + + if (cpu_min_uV > cpu_uV) { + err = tegra20_core_rtc_update(tegra, core_rdev, rtc_rdev, + cpu_uV, cpu_min_uV); + if (err) + return err; + + err = regulator_set_voltage_rdev(cpu_rdev, cpu_min_uV, + cpu_max_uV, PM_SUSPEND_ON); + if (err) + return err; + } else if (cpu_min_uV < cpu_uV) { + err = regulator_set_voltage_rdev(cpu_rdev, cpu_min_uV, + cpu_max_uV, PM_SUSPEND_ON); + if (err) + return err; + + err = tegra20_core_rtc_update(tegra, core_rdev, rtc_rdev, + cpu_uV, cpu_min_uV); + if (err) + return err; + } + + return 0; +} + +static int tegra20_regulator_balance_voltage(struct regulator_coupler *coupler, + struct regulator_dev *rdev, + suspend_state_t state) +{ + struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler); + struct regulator_dev *core_rdev = tegra->core_rdev; + struct regulator_dev *cpu_rdev = tegra->cpu_rdev; + struct regulator_dev *rtc_rdev = tegra->rtc_rdev; + + if ((core_rdev != rdev && cpu_rdev != rdev && rtc_rdev != rdev) || + state != PM_SUSPEND_ON) { + pr_err("regulators are not coupled properly\n"); + return -EINVAL; + } + + tegra->sys_reboot_mode = READ_ONCE(tegra->sys_reboot_mode_req); + tegra->sys_suspend_mode = READ_ONCE(tegra->sys_suspend_mode_req); + + if (rdev == cpu_rdev) + return tegra20_cpu_voltage_update(tegra, cpu_rdev, + core_rdev, rtc_rdev); + + if (rdev == core_rdev) + return tegra20_core_voltage_update(tegra, cpu_rdev, + core_rdev, rtc_rdev); + + pr_err("changing %s voltage not permitted\n", rdev_get_name(rtc_rdev)); + + return -EPERM; +} + +static int tegra20_regulator_prepare_suspend(struct tegra_regulator_coupler *tegra, + bool sys_suspend_mode) +{ + int err; + + if (!tegra->core_rdev || !tegra->rtc_rdev || !tegra->cpu_rdev) + return 0; + + /* + * All power domains are enabled early during resume from suspend + * by GENPD core. Domains like VENC may require a higher voltage + * when enabled during resume from suspend. This also prepares + * hardware for resuming from LP0. + */ + + WRITE_ONCE(tegra->sys_suspend_mode_req, sys_suspend_mode); + + err = regulator_sync_voltage_rdev(tegra->cpu_rdev); + if (err) + return err; + + err = regulator_sync_voltage_rdev(tegra->core_rdev); + if (err) + return err; + + return 0; +} + +static int tegra20_regulator_suspend(struct notifier_block *notifier, + unsigned long mode, void *arg) +{ + struct tegra_regulator_coupler *tegra; + int ret = 0; + + tegra = container_of(notifier, struct tegra_regulator_coupler, + suspend_notifier); + + switch (mode) { + case PM_HIBERNATION_PREPARE: + case PM_RESTORE_PREPARE: + case PM_SUSPEND_PREPARE: + ret = tegra20_regulator_prepare_suspend(tegra, true); + break; + + case PM_POST_HIBERNATION: + case PM_POST_RESTORE: + case PM_POST_SUSPEND: + ret = tegra20_regulator_prepare_suspend(tegra, false); + break; + } + + if (ret) + pr_err("failed to prepare regulators: %d\n", ret); + + return notifier_from_errno(ret); +} + +static int tegra20_regulator_prepare_reboot(struct tegra_regulator_coupler *tegra, + bool sys_reboot_mode) +{ + int err; + + if (!tegra->core_rdev || !tegra->rtc_rdev || !tegra->cpu_rdev) + return 0; + + WRITE_ONCE(tegra->sys_reboot_mode_req, true); + + /* + * Some devices use CPU soft-reboot method and in this case we + * should ensure that voltages are sane for the reboot by restoring + * the minimum boot levels. + */ + err = regulator_sync_voltage_rdev(tegra->cpu_rdev); + if (err) + return err; + + err = regulator_sync_voltage_rdev(tegra->core_rdev); + if (err) + return err; + + WRITE_ONCE(tegra->sys_reboot_mode_req, sys_reboot_mode); + + return 0; +} + +static int tegra20_regulator_reboot(struct notifier_block *notifier, + unsigned long event, void *cmd) +{ + struct tegra_regulator_coupler *tegra; + int ret; + + if (event != SYS_RESTART) + return NOTIFY_DONE; + + tegra = container_of(notifier, struct tegra_regulator_coupler, + reboot_notifier); + + ret = tegra20_regulator_prepare_reboot(tegra, true); + + return notifier_from_errno(ret); +} + +static int tegra20_regulator_attach(struct regulator_coupler *coupler, + struct regulator_dev *rdev) +{ + struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler); + struct device_node *np = rdev->dev.of_node; + + if (of_property_read_bool(np, "nvidia,tegra-core-regulator") && + !tegra->core_rdev) { + tegra->core_rdev = rdev; + return 0; + } + + if (of_property_read_bool(np, "nvidia,tegra-rtc-regulator") && + !tegra->rtc_rdev) { + tegra->rtc_rdev = rdev; + return 0; + } + + if (of_property_read_bool(np, "nvidia,tegra-cpu-regulator") && + !tegra->cpu_rdev) { + tegra->cpu_rdev = rdev; + return 0; + } + + return -EINVAL; +} + +static int tegra20_regulator_detach(struct regulator_coupler *coupler, + struct regulator_dev *rdev) +{ + struct tegra_regulator_coupler *tegra = to_tegra_coupler(coupler); + + /* + * We don't expect regulators to be decoupled during reboot, + * this may race with the reboot handler and shouldn't ever + * happen in practice. + */ + if (WARN_ON_ONCE(system_state > SYSTEM_RUNNING)) + return -EPERM; + + if (tegra->core_rdev == rdev) { + tegra->core_rdev = NULL; + return 0; + } + + if (tegra->rtc_rdev == rdev) { + tegra->rtc_rdev = NULL; + return 0; + } + + if (tegra->cpu_rdev == rdev) { + tegra->cpu_rdev = NULL; + return 0; + } + + return -EINVAL; +} + +static struct tegra_regulator_coupler tegra20_coupler = { + .coupler = { + .attach_regulator = tegra20_regulator_attach, + .detach_regulator = tegra20_regulator_detach, + .balance_voltage = tegra20_regulator_balance_voltage, + }, + .reboot_notifier.notifier_call = tegra20_regulator_reboot, + .suspend_notifier.notifier_call = tegra20_regulator_suspend, +}; + +static int __init tegra_regulator_coupler_init(void) +{ + int err; + + if (!of_machine_is_compatible("nvidia,tegra20")) + return 0; + + err = register_reboot_notifier(&tegra20_coupler.reboot_notifier); + WARN_ON(err); + + err = register_pm_notifier(&tegra20_coupler.suspend_notifier); + WARN_ON(err); + + return regulator_coupler_register(&tegra20_coupler.coupler); +} +arch_initcall(tegra_regulator_coupler_init); -- cgit v1.2.3