From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/soc/xilinx/zynqmp_pm_domains.c | 322 +++++++++++++++++++++++++++++++++ 1 file changed, 322 insertions(+) create mode 100644 drivers/soc/xilinx/zynqmp_pm_domains.c (limited to 'drivers/soc/xilinx/zynqmp_pm_domains.c') diff --git a/drivers/soc/xilinx/zynqmp_pm_domains.c b/drivers/soc/xilinx/zynqmp_pm_domains.c new file mode 100644 index 000000000..fcce2433b --- /dev/null +++ b/drivers/soc/xilinx/zynqmp_pm_domains.c @@ -0,0 +1,322 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * ZynqMP Generic PM domain support + * + * Copyright (C) 2015-2019 Xilinx, Inc. + * + * Davorin Mista + * Jolly Shah + * Rajan Vaja + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#define ZYNQMP_NUM_DOMAINS (100) + +static int min_capability; + +/** + * struct zynqmp_pm_domain - Wrapper around struct generic_pm_domain + * @gpd: Generic power domain + * @node_id: PM node ID corresponding to device inside PM domain + * @requested: The PM node mapped to the PM domain has been requested + */ +struct zynqmp_pm_domain { + struct generic_pm_domain gpd; + u32 node_id; + bool requested; +}; + +#define to_zynqmp_pm_domain(pm_domain) \ + container_of(pm_domain, struct zynqmp_pm_domain, gpd) + +/** + * zynqmp_gpd_is_active_wakeup_path() - Check if device is in wakeup source + * path + * @dev: Device to check for wakeup source path + * @not_used: Data member (not required) + * + * This function is checks device's child hierarchy and checks if any device is + * set as wakeup source. + * + * Return: 1 if device is in wakeup source path else 0 + */ +static int zynqmp_gpd_is_active_wakeup_path(struct device *dev, void *not_used) +{ + int may_wakeup; + + may_wakeup = device_may_wakeup(dev); + if (may_wakeup) + return may_wakeup; + + return device_for_each_child(dev, NULL, + zynqmp_gpd_is_active_wakeup_path); +} + +/** + * zynqmp_gpd_power_on() - Power on PM domain + * @domain: Generic PM domain + * + * This function is called before devices inside a PM domain are resumed, to + * power on PM domain. + * + * Return: 0 on success, error code otherwise + */ +static int zynqmp_gpd_power_on(struct generic_pm_domain *domain) +{ + struct zynqmp_pm_domain *pd = to_zynqmp_pm_domain(domain); + int ret; + + ret = zynqmp_pm_set_requirement(pd->node_id, + ZYNQMP_PM_CAPABILITY_ACCESS, + ZYNQMP_PM_MAX_QOS, + ZYNQMP_PM_REQUEST_ACK_BLOCKING); + if (ret) { + dev_err(&domain->dev, + "failed to set requirement to 0x%x for PM node id %d: %d\n", + ZYNQMP_PM_CAPABILITY_ACCESS, pd->node_id, ret); + return ret; + } + + dev_dbg(&domain->dev, "set requirement to 0x%x for PM node id %d\n", + ZYNQMP_PM_CAPABILITY_ACCESS, pd->node_id); + + return 0; +} + +/** + * zynqmp_gpd_power_off() - Power off PM domain + * @domain: Generic PM domain + * + * This function is called after devices inside a PM domain are suspended, to + * power off PM domain. + * + * Return: 0 on success, error code otherwise + */ +static int zynqmp_gpd_power_off(struct generic_pm_domain *domain) +{ + struct zynqmp_pm_domain *pd = to_zynqmp_pm_domain(domain); + int ret; + struct pm_domain_data *pdd, *tmp; + u32 capabilities = min_capability; + bool may_wakeup; + + /* If domain is already released there is nothing to be done */ + if (!pd->requested) { + dev_dbg(&domain->dev, "PM node id %d is already released\n", + pd->node_id); + return 0; + } + + list_for_each_entry_safe(pdd, tmp, &domain->dev_list, list_node) { + /* If device is in wakeup path, set capability to WAKEUP */ + may_wakeup = zynqmp_gpd_is_active_wakeup_path(pdd->dev, NULL); + if (may_wakeup) { + dev_dbg(pdd->dev, "device is in wakeup path in %s\n", + domain->name); + capabilities = ZYNQMP_PM_CAPABILITY_WAKEUP; + break; + } + } + + ret = zynqmp_pm_set_requirement(pd->node_id, capabilities, 0, + ZYNQMP_PM_REQUEST_ACK_NO); + if (ret) { + dev_err(&domain->dev, + "failed to set requirement to 0x%x for PM node id %d: %d\n", + capabilities, pd->node_id, ret); + return ret; + } + + dev_dbg(&domain->dev, "set requirement to 0x%x for PM node id %d\n", + capabilities, pd->node_id); + + return 0; +} + +/** + * zynqmp_gpd_attach_dev() - Attach device to the PM domain + * @domain: Generic PM domain + * @dev: Device to attach + * + * Return: 0 on success, error code otherwise + */ +static int zynqmp_gpd_attach_dev(struct generic_pm_domain *domain, + struct device *dev) +{ + struct zynqmp_pm_domain *pd = to_zynqmp_pm_domain(domain); + struct device_link *link; + int ret; + + link = device_link_add(dev, &domain->dev, DL_FLAG_SYNC_STATE_ONLY); + if (!link) + dev_dbg(&domain->dev, "failed to create device link for %s\n", + dev_name(dev)); + + /* If this is not the first device to attach there is nothing to do */ + if (domain->device_count) + return 0; + + ret = zynqmp_pm_request_node(pd->node_id, 0, 0, + ZYNQMP_PM_REQUEST_ACK_BLOCKING); + if (ret) { + dev_err(&domain->dev, "%s request failed for node %d: %d\n", + domain->name, pd->node_id, ret); + return ret; + } + + pd->requested = true; + + dev_dbg(&domain->dev, "%s requested PM node id %d\n", + dev_name(dev), pd->node_id); + + return 0; +} + +/** + * zynqmp_gpd_detach_dev() - Detach device from the PM domain + * @domain: Generic PM domain + * @dev: Device to detach + */ +static void zynqmp_gpd_detach_dev(struct generic_pm_domain *domain, + struct device *dev) +{ + struct zynqmp_pm_domain *pd = to_zynqmp_pm_domain(domain); + int ret; + + /* If this is not the last device to detach there is nothing to do */ + if (domain->device_count) + return; + + ret = zynqmp_pm_release_node(pd->node_id); + if (ret) { + dev_err(&domain->dev, "failed to release PM node id %d: %d\n", + pd->node_id, ret); + return; + } + + pd->requested = false; + + dev_dbg(&domain->dev, "%s released PM node id %d\n", + dev_name(dev), pd->node_id); +} + +static struct generic_pm_domain *zynqmp_gpd_xlate + (struct of_phandle_args *genpdspec, void *data) +{ + struct genpd_onecell_data *genpd_data = data; + unsigned int i, idx = genpdspec->args[0]; + struct zynqmp_pm_domain *pd; + + pd = to_zynqmp_pm_domain(genpd_data->domains[0]); + + if (genpdspec->args_count != 1) + return ERR_PTR(-EINVAL); + + /* Check for existing pm domains */ + for (i = 0; i < ZYNQMP_NUM_DOMAINS; i++) { + if (pd[i].node_id == idx) + goto done; + } + + /** + * Add index in empty node_id of power domain list as no existing + * power domain found for current index. + */ + for (i = 0; i < ZYNQMP_NUM_DOMAINS; i++) { + if (pd[i].node_id == 0) { + pd[i].node_id = idx; + break; + } + } + +done: + if (!genpd_data->domains[i] || i == ZYNQMP_NUM_DOMAINS) + return ERR_PTR(-ENOENT); + + return genpd_data->domains[i]; +} + +static int zynqmp_gpd_probe(struct platform_device *pdev) +{ + int i; + struct genpd_onecell_data *zynqmp_pd_data; + struct generic_pm_domain **domains; + struct zynqmp_pm_domain *pd; + struct device *dev = &pdev->dev; + + pd = devm_kcalloc(dev, ZYNQMP_NUM_DOMAINS, sizeof(*pd), GFP_KERNEL); + if (!pd) + return -ENOMEM; + + zynqmp_pd_data = devm_kzalloc(dev, sizeof(*zynqmp_pd_data), GFP_KERNEL); + if (!zynqmp_pd_data) + return -ENOMEM; + + zynqmp_pd_data->xlate = zynqmp_gpd_xlate; + + domains = devm_kcalloc(dev, ZYNQMP_NUM_DOMAINS, sizeof(*domains), + GFP_KERNEL); + if (!domains) + return -ENOMEM; + + if (!of_device_is_compatible(dev->parent->of_node, + "xlnx,zynqmp-firmware")) + min_capability = ZYNQMP_PM_CAPABILITY_UNUSABLE; + + for (i = 0; i < ZYNQMP_NUM_DOMAINS; i++, pd++) { + pd->node_id = 0; + pd->gpd.name = kasprintf(GFP_KERNEL, "domain%d", i); + pd->gpd.power_off = zynqmp_gpd_power_off; + pd->gpd.power_on = zynqmp_gpd_power_on; + pd->gpd.attach_dev = zynqmp_gpd_attach_dev; + pd->gpd.detach_dev = zynqmp_gpd_detach_dev; + + domains[i] = &pd->gpd; + + /* Mark all PM domains as initially powered off */ + pm_genpd_init(&pd->gpd, NULL, true); + } + + zynqmp_pd_data->domains = domains; + zynqmp_pd_data->num_domains = ZYNQMP_NUM_DOMAINS; + of_genpd_add_provider_onecell(dev->parent->of_node, zynqmp_pd_data); + + return 0; +} + +static int zynqmp_gpd_remove(struct platform_device *pdev) +{ + of_genpd_del_provider(pdev->dev.parent->of_node); + + return 0; +} + +static void zynqmp_gpd_sync_state(struct device *dev) +{ + int ret; + + ret = zynqmp_pm_init_finalize(); + if (ret) + dev_warn(dev, "failed to release power management to firmware\n"); +} + +static struct platform_driver zynqmp_power_domain_driver = { + .driver = { + .name = "zynqmp_power_controller", + .sync_state = zynqmp_gpd_sync_state, + }, + .probe = zynqmp_gpd_probe, + .remove = zynqmp_gpd_remove, +}; +module_platform_driver(zynqmp_power_domain_driver); + +MODULE_ALIAS("platform:zynqmp_power_controller"); -- cgit v1.2.3