From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/spi/spi-jcore.c | 235 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 235 insertions(+) create mode 100644 drivers/spi/spi-jcore.c (limited to 'drivers/spi/spi-jcore.c') diff --git a/drivers/spi/spi-jcore.c b/drivers/spi/spi-jcore.c new file mode 100644 index 000000000..74c8319c2 --- /dev/null +++ b/drivers/spi/spi-jcore.c @@ -0,0 +1,235 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * J-Core SPI controller driver + * + * Copyright (C) 2012-2016 Smart Energy Instruments, Inc. + * + * Current version by Rich Felker + * Based loosely on initial version by Oleksandr G Zhadan + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "jcore_spi" + +#define CTRL_REG 0x0 +#define DATA_REG 0x4 + +#define JCORE_SPI_CTRL_XMIT 0x02 +#define JCORE_SPI_STAT_BUSY 0x02 +#define JCORE_SPI_CTRL_LOOP 0x08 +#define JCORE_SPI_CTRL_CS_BITS 0x15 + +#define JCORE_SPI_WAIT_RDY_MAX_LOOP 2000000 + +struct jcore_spi { + struct spi_master *master; + void __iomem *base; + unsigned int cs_reg; + unsigned int speed_reg; + unsigned int speed_hz; + unsigned int clock_freq; +}; + +static int jcore_spi_wait(void __iomem *ctrl_reg) +{ + unsigned timeout = JCORE_SPI_WAIT_RDY_MAX_LOOP; + + do { + if (!(readl(ctrl_reg) & JCORE_SPI_STAT_BUSY)) + return 0; + cpu_relax(); + } while (--timeout); + + return -EBUSY; +} + +static void jcore_spi_program(struct jcore_spi *hw) +{ + void __iomem *ctrl_reg = hw->base + CTRL_REG; + + if (jcore_spi_wait(ctrl_reg)) + dev_err(hw->master->dev.parent, + "timeout waiting to program ctrl reg.\n"); + + writel(hw->cs_reg | hw->speed_reg, ctrl_reg); +} + +static void jcore_spi_chipsel(struct spi_device *spi, bool value) +{ + struct jcore_spi *hw = spi_master_get_devdata(spi->master); + u32 csbit = 1U << (2 * spi->chip_select); + + dev_dbg(hw->master->dev.parent, "chipselect %d\n", spi->chip_select); + + if (value) + hw->cs_reg |= csbit; + else + hw->cs_reg &= ~csbit; + + jcore_spi_program(hw); +} + +static void jcore_spi_baudrate(struct jcore_spi *hw, int speed) +{ + if (speed == hw->speed_hz) + return; + hw->speed_hz = speed; + if (speed >= hw->clock_freq / 2) + hw->speed_reg = 0; + else + hw->speed_reg = ((hw->clock_freq / 2 / speed) - 1) << 27; + jcore_spi_program(hw); + dev_dbg(hw->master->dev.parent, "speed=%d reg=0x%x\n", + speed, hw->speed_reg); +} + +static int jcore_spi_txrx(struct spi_master *master, struct spi_device *spi, + struct spi_transfer *t) +{ + struct jcore_spi *hw = spi_master_get_devdata(master); + + void __iomem *ctrl_reg = hw->base + CTRL_REG; + void __iomem *data_reg = hw->base + DATA_REG; + u32 xmit; + + /* data buffers */ + const unsigned char *tx; + unsigned char *rx; + unsigned int len; + unsigned int count; + + jcore_spi_baudrate(hw, t->speed_hz); + + xmit = hw->cs_reg | hw->speed_reg | JCORE_SPI_CTRL_XMIT; + tx = t->tx_buf; + rx = t->rx_buf; + len = t->len; + + for (count = 0; count < len; count++) { + if (jcore_spi_wait(ctrl_reg)) + break; + + writel(tx ? *tx++ : 0, data_reg); + writel(xmit, ctrl_reg); + + if (jcore_spi_wait(ctrl_reg)) + break; + + if (rx) + *rx++ = readl(data_reg); + } + + spi_finalize_current_transfer(master); + + if (count < len) + return -EREMOTEIO; + + return 0; +} + +static int jcore_spi_probe(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + struct jcore_spi *hw; + struct spi_master *master; + struct resource *res; + u32 clock_freq; + struct clk *clk; + int err = -ENODEV; + + master = spi_alloc_master(&pdev->dev, sizeof(struct jcore_spi)); + if (!master) + return err; + + /* Setup the master state. */ + master->num_chipselect = 3; + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + master->transfer_one = jcore_spi_txrx; + master->set_cs = jcore_spi_chipsel; + master->dev.of_node = node; + master->bus_num = pdev->id; + + hw = spi_master_get_devdata(master); + hw->master = master; + platform_set_drvdata(pdev, hw); + + /* Find and map our resources */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + goto exit_busy; + if (!devm_request_mem_region(&pdev->dev, res->start, + resource_size(res), pdev->name)) + goto exit_busy; + hw->base = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + if (!hw->base) + goto exit_busy; + + /* + * The SPI clock rate controlled via a configurable clock divider + * which is applied to the reference clock. A 50 MHz reference is + * most suitable for obtaining standard SPI clock rates, but some + * designs may have a different reference clock, and the DT must + * make the driver aware so that it can properly program the + * requested rate. If the clock is omitted, 50 MHz is assumed. + */ + clock_freq = 50000000; + clk = devm_clk_get(&pdev->dev, "ref_clk"); + if (!IS_ERR(clk)) { + if (clk_prepare_enable(clk) == 0) { + clock_freq = clk_get_rate(clk); + clk_disable_unprepare(clk); + } else + dev_warn(&pdev->dev, "could not enable ref_clk\n"); + } + hw->clock_freq = clock_freq; + + /* Initialize all CS bits to high. */ + hw->cs_reg = JCORE_SPI_CTRL_CS_BITS; + jcore_spi_baudrate(hw, 400000); + + /* Register our spi controller */ + err = devm_spi_register_master(&pdev->dev, master); + if (err) + goto exit; + + return 0; + +exit_busy: + err = -EBUSY; +exit: + spi_master_put(master); + return err; +} + +static const struct of_device_id jcore_spi_of_match[] = { + { .compatible = "jcore,spi2" }, + {}, +}; +MODULE_DEVICE_TABLE(of, jcore_spi_of_match); + +static struct platform_driver jcore_spi_driver = { + .probe = jcore_spi_probe, + .driver = { + .name = DRV_NAME, + .of_match_table = jcore_spi_of_match, + }, +}; + +module_platform_driver(jcore_spi_driver); + +MODULE_DESCRIPTION("J-Core SPI driver"); +MODULE_AUTHOR("Rich Felker "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); -- cgit v1.2.3