From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/spi/spi-ppc4xx.c | 499 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 499 insertions(+) create mode 100644 drivers/spi/spi-ppc4xx.c (limited to 'drivers/spi/spi-ppc4xx.c') diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c new file mode 100644 index 000000000..d65f047b6 --- /dev/null +++ b/drivers/spi/spi-ppc4xx.c @@ -0,0 +1,499 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * SPI_PPC4XX SPI controller driver. + * + * Copyright (C) 2007 Gary Jennejohn + * Copyright 2008 Stefan Roese , DENX Software Engineering + * Copyright 2009 Harris Corporation, Steven A. Falco + * + * Based in part on drivers/spi/spi_s3c24xx.c + * + * Copyright (c) 2006 Ben Dooks + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks + */ + +/* + * The PPC4xx SPI controller has no FIFO so each sent/received byte will + * generate an interrupt to the CPU. This can cause high CPU utilization. + * This driver allows platforms to reduce the interrupt load on the CPU + * during SPI transfers by setting max_speed_hz via the device tree. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +/* bits in mode register - bit 0 is MSb */ + +/* + * SPI_PPC4XX_MODE_SCP = 0 means "data latched on trailing edge of clock" + * SPI_PPC4XX_MODE_SCP = 1 means "data latched on leading edge of clock" + * Note: This is the inverse of CPHA. + */ +#define SPI_PPC4XX_MODE_SCP (0x80 >> 3) + +/* SPI_PPC4XX_MODE_SPE = 1 means "port enabled" */ +#define SPI_PPC4XX_MODE_SPE (0x80 >> 4) + +/* + * SPI_PPC4XX_MODE_RD = 0 means "MSB first" - this is the normal mode + * SPI_PPC4XX_MODE_RD = 1 means "LSB first" - this is bit-reversed mode + * Note: This is identical to SPI_LSB_FIRST. + */ +#define SPI_PPC4XX_MODE_RD (0x80 >> 5) + +/* + * SPI_PPC4XX_MODE_CI = 0 means "clock idles low" + * SPI_PPC4XX_MODE_CI = 1 means "clock idles high" + * Note: This is identical to CPOL. + */ +#define SPI_PPC4XX_MODE_CI (0x80 >> 6) + +/* + * SPI_PPC4XX_MODE_IL = 0 means "loopback disable" + * SPI_PPC4XX_MODE_IL = 1 means "loopback enable" + */ +#define SPI_PPC4XX_MODE_IL (0x80 >> 7) + +/* bits in control register */ +/* starts a transfer when set */ +#define SPI_PPC4XX_CR_STR (0x80 >> 7) + +/* bits in status register */ +/* port is busy with a transfer */ +#define SPI_PPC4XX_SR_BSY (0x80 >> 6) +/* RxD ready */ +#define SPI_PPC4XX_SR_RBR (0x80 >> 7) + +/* clock settings (SCP and CI) for various SPI modes */ +#define SPI_CLK_MODE0 (SPI_PPC4XX_MODE_SCP | 0) +#define SPI_CLK_MODE1 (0 | 0) +#define SPI_CLK_MODE2 (SPI_PPC4XX_MODE_SCP | SPI_PPC4XX_MODE_CI) +#define SPI_CLK_MODE3 (0 | SPI_PPC4XX_MODE_CI) + +#define DRIVER_NAME "spi_ppc4xx_of" + +struct spi_ppc4xx_regs { + u8 mode; + u8 rxd; + u8 txd; + u8 cr; + u8 sr; + u8 dummy; + /* + * Clock divisor modulus register + * This uses the following formula: + * SCPClkOut = OPBCLK/(4(CDM + 1)) + * or + * CDM = (OPBCLK/4*SCPClkOut) - 1 + * bit 0 is the MSb! + */ + u8 cdm; +}; + +/* SPI Controller driver's private data. */ +struct ppc4xx_spi { + /* bitbang has to be first */ + struct spi_bitbang bitbang; + struct completion done; + + u64 mapbase; + u64 mapsize; + int irqnum; + /* need this to set the SPI clock */ + unsigned int opb_freq; + + /* for transfers */ + int len; + int count; + /* data buffers */ + const unsigned char *tx; + unsigned char *rx; + + struct spi_ppc4xx_regs __iomem *regs; /* pointer to the registers */ + struct spi_master *master; + struct device *dev; +}; + +/* need this so we can set the clock in the chipselect routine */ +struct spi_ppc4xx_cs { + u8 mode; +}; + +static int spi_ppc4xx_txrx(struct spi_device *spi, struct spi_transfer *t) +{ + struct ppc4xx_spi *hw; + u8 data; + + dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n", + t->tx_buf, t->rx_buf, t->len); + + hw = spi_master_get_devdata(spi->master); + + hw->tx = t->tx_buf; + hw->rx = t->rx_buf; + hw->len = t->len; + hw->count = 0; + + /* send the first byte */ + data = hw->tx ? hw->tx[0] : 0; + out_8(&hw->regs->txd, data); + out_8(&hw->regs->cr, SPI_PPC4XX_CR_STR); + wait_for_completion(&hw->done); + + return hw->count; +} + +static int spi_ppc4xx_setupxfer(struct spi_device *spi, struct spi_transfer *t) +{ + struct ppc4xx_spi *hw = spi_master_get_devdata(spi->master); + struct spi_ppc4xx_cs *cs = spi->controller_state; + int scr; + u8 cdm = 0; + u32 speed; + u8 bits_per_word; + + /* Start with the generic configuration for this device. */ + bits_per_word = spi->bits_per_word; + speed = spi->max_speed_hz; + + /* + * Modify the configuration if the transfer overrides it. Do not allow + * the transfer to overwrite the generic configuration with zeros. + */ + if (t) { + if (t->bits_per_word) + bits_per_word = t->bits_per_word; + + if (t->speed_hz) + speed = min(t->speed_hz, spi->max_speed_hz); + } + + if (!speed || (speed > spi->max_speed_hz)) { + dev_err(&spi->dev, "invalid speed_hz (%d)\n", speed); + return -EINVAL; + } + + /* Write new configuration */ + out_8(&hw->regs->mode, cs->mode); + + /* Set the clock */ + /* opb_freq was already divided by 4 */ + scr = (hw->opb_freq / speed) - 1; + if (scr > 0) + cdm = min(scr, 0xff); + + dev_dbg(&spi->dev, "setting pre-scaler to %d (hz %d)\n", cdm, speed); + + if (in_8(&hw->regs->cdm) != cdm) + out_8(&hw->regs->cdm, cdm); + + mutex_lock(&hw->bitbang.lock); + if (!hw->bitbang.busy) { + hw->bitbang.chipselect(spi, BITBANG_CS_INACTIVE); + /* Need to ndelay here? */ + } + mutex_unlock(&hw->bitbang.lock); + + return 0; +} + +static int spi_ppc4xx_setup(struct spi_device *spi) +{ + struct spi_ppc4xx_cs *cs = spi->controller_state; + + if (!spi->max_speed_hz) { + dev_err(&spi->dev, "invalid max_speed_hz (must be non-zero)\n"); + return -EINVAL; + } + + if (cs == NULL) { + cs = kzalloc(sizeof(*cs), GFP_KERNEL); + if (!cs) + return -ENOMEM; + spi->controller_state = cs; + } + + /* + * We set all bits of the SPI0_MODE register, so, + * no need to read-modify-write + */ + cs->mode = SPI_PPC4XX_MODE_SPE; + + switch (spi->mode & SPI_MODE_X_MASK) { + case SPI_MODE_0: + cs->mode |= SPI_CLK_MODE0; + break; + case SPI_MODE_1: + cs->mode |= SPI_CLK_MODE1; + break; + case SPI_MODE_2: + cs->mode |= SPI_CLK_MODE2; + break; + case SPI_MODE_3: + cs->mode |= SPI_CLK_MODE3; + break; + } + + if (spi->mode & SPI_LSB_FIRST) + cs->mode |= SPI_PPC4XX_MODE_RD; + + return 0; +} + +static irqreturn_t spi_ppc4xx_int(int irq, void *dev_id) +{ + struct ppc4xx_spi *hw; + u8 status; + u8 data; + unsigned int count; + + hw = (struct ppc4xx_spi *)dev_id; + + status = in_8(&hw->regs->sr); + if (!status) + return IRQ_NONE; + + /* + * BSY de-asserts one cycle after the transfer is complete. The + * interrupt is asserted after the transfer is complete. The exact + * relationship is not documented, hence this code. + */ + + if (unlikely(status & SPI_PPC4XX_SR_BSY)) { + u8 lstatus; + int cnt = 0; + + dev_dbg(hw->dev, "got interrupt but spi still busy?\n"); + do { + ndelay(10); + lstatus = in_8(&hw->regs->sr); + } while (++cnt < 100 && lstatus & SPI_PPC4XX_SR_BSY); + + if (cnt >= 100) { + dev_err(hw->dev, "busywait: too many loops!\n"); + complete(&hw->done); + return IRQ_HANDLED; + } else { + /* status is always 1 (RBR) here */ + status = in_8(&hw->regs->sr); + dev_dbg(hw->dev, "loops %d status %x\n", cnt, status); + } + } + + count = hw->count; + hw->count++; + + /* RBR triggered this interrupt. Therefore, data must be ready. */ + data = in_8(&hw->regs->rxd); + if (hw->rx) + hw->rx[count] = data; + + count++; + + if (count < hw->len) { + data = hw->tx ? hw->tx[count] : 0; + out_8(&hw->regs->txd, data); + out_8(&hw->regs->cr, SPI_PPC4XX_CR_STR); + } else { + complete(&hw->done); + } + + return IRQ_HANDLED; +} + +static void spi_ppc4xx_cleanup(struct spi_device *spi) +{ + kfree(spi->controller_state); +} + +static void spi_ppc4xx_enable(struct ppc4xx_spi *hw) +{ + /* + * On all 4xx PPC's the SPI bus is shared/multiplexed with + * the 2nd I2C bus. We need to enable the SPI bus before + * using it. + */ + + /* need to clear bit 14 to enable SPC */ + dcri_clrset(SDR0, SDR0_PFC1, 0x80000000 >> 14, 0); +} + +/* + * platform_device layer stuff... + */ +static int spi_ppc4xx_of_probe(struct platform_device *op) +{ + struct ppc4xx_spi *hw; + struct spi_master *master; + struct spi_bitbang *bbp; + struct resource resource; + struct device_node *np = op->dev.of_node; + struct device *dev = &op->dev; + struct device_node *opbnp; + int ret; + const unsigned int *clk; + + master = spi_alloc_master(dev, sizeof(*hw)); + if (master == NULL) + return -ENOMEM; + master->dev.of_node = np; + platform_set_drvdata(op, master); + hw = spi_master_get_devdata(master); + hw->master = master; + hw->dev = dev; + + init_completion(&hw->done); + + /* Setup the state for the bitbang driver */ + bbp = &hw->bitbang; + bbp->master = hw->master; + bbp->setup_transfer = spi_ppc4xx_setupxfer; + bbp->txrx_bufs = spi_ppc4xx_txrx; + bbp->use_dma = 0; + bbp->master->setup = spi_ppc4xx_setup; + bbp->master->cleanup = spi_ppc4xx_cleanup; + bbp->master->bits_per_word_mask = SPI_BPW_MASK(8); + bbp->master->use_gpio_descriptors = true; + /* + * The SPI core will count the number of GPIO descriptors to figure + * out the number of chip selects available on the platform. + */ + bbp->master->num_chipselect = 0; + + /* the spi->mode bits understood by this driver: */ + bbp->master->mode_bits = + SPI_CPHA | SPI_CPOL | SPI_CS_HIGH | SPI_LSB_FIRST; + + /* Get the clock for the OPB */ + opbnp = of_find_compatible_node(NULL, NULL, "ibm,opb"); + if (opbnp == NULL) { + dev_err(dev, "OPB: cannot find node\n"); + ret = -ENODEV; + goto free_master; + } + /* Get the clock (Hz) for the OPB */ + clk = of_get_property(opbnp, "clock-frequency", NULL); + if (clk == NULL) { + dev_err(dev, "OPB: no clock-frequency property set\n"); + of_node_put(opbnp); + ret = -ENODEV; + goto free_master; + } + hw->opb_freq = *clk; + hw->opb_freq >>= 2; + of_node_put(opbnp); + + ret = of_address_to_resource(np, 0, &resource); + if (ret) { + dev_err(dev, "error while parsing device node resource\n"); + goto free_master; + } + hw->mapbase = resource.start; + hw->mapsize = resource_size(&resource); + + /* Sanity check */ + if (hw->mapsize < sizeof(struct spi_ppc4xx_regs)) { + dev_err(dev, "too small to map registers\n"); + ret = -EINVAL; + goto free_master; + } + + /* Request IRQ */ + hw->irqnum = irq_of_parse_and_map(np, 0); + ret = request_irq(hw->irqnum, spi_ppc4xx_int, + 0, "spi_ppc4xx_of", (void *)hw); + if (ret) { + dev_err(dev, "unable to allocate interrupt\n"); + goto free_master; + } + + if (!request_mem_region(hw->mapbase, hw->mapsize, DRIVER_NAME)) { + dev_err(dev, "resource unavailable\n"); + ret = -EBUSY; + goto request_mem_error; + } + + hw->regs = ioremap(hw->mapbase, sizeof(struct spi_ppc4xx_regs)); + + if (!hw->regs) { + dev_err(dev, "unable to memory map registers\n"); + ret = -ENXIO; + goto map_io_error; + } + + spi_ppc4xx_enable(hw); + + /* Finally register our spi controller */ + dev->dma_mask = 0; + ret = spi_bitbang_start(bbp); + if (ret) { + dev_err(dev, "failed to register SPI master\n"); + goto unmap_regs; + } + + dev_info(dev, "driver initialized\n"); + + return 0; + +unmap_regs: + iounmap(hw->regs); +map_io_error: + release_mem_region(hw->mapbase, hw->mapsize); +request_mem_error: + free_irq(hw->irqnum, hw); +free_master: + spi_master_put(master); + + dev_err(dev, "initialization failed\n"); + return ret; +} + +static int spi_ppc4xx_of_remove(struct platform_device *op) +{ + struct spi_master *master = platform_get_drvdata(op); + struct ppc4xx_spi *hw = spi_master_get_devdata(master); + + spi_bitbang_stop(&hw->bitbang); + release_mem_region(hw->mapbase, hw->mapsize); + free_irq(hw->irqnum, hw); + iounmap(hw->regs); + spi_master_put(master); + return 0; +} + +static const struct of_device_id spi_ppc4xx_of_match[] = { + { .compatible = "ibm,ppc4xx-spi", }, + {}, +}; + +MODULE_DEVICE_TABLE(of, spi_ppc4xx_of_match); + +static struct platform_driver spi_ppc4xx_of_driver = { + .probe = spi_ppc4xx_of_probe, + .remove = spi_ppc4xx_of_remove, + .driver = { + .name = DRIVER_NAME, + .of_match_table = spi_ppc4xx_of_match, + }, +}; +module_platform_driver(spi_ppc4xx_of_driver); + +MODULE_AUTHOR("Gary Jennejohn & Stefan Roese"); +MODULE_DESCRIPTION("Simple PPC4xx SPI Driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3