From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/ssb/driver_extif.c | 201 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 201 insertions(+) create mode 100644 drivers/ssb/driver_extif.c (limited to 'drivers/ssb/driver_extif.c') diff --git a/drivers/ssb/driver_extif.c b/drivers/ssb/driver_extif.c new file mode 100644 index 000000000..bc275968f --- /dev/null +++ b/drivers/ssb/driver_extif.c @@ -0,0 +1,201 @@ +/* + * Sonics Silicon Backplane + * Broadcom EXTIF core driver + * + * Copyright 2005, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch + * Copyright 2006, 2007, Felix Fietkau + * Copyright 2007, Aurelien Jarno + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "ssb_private.h" + +#include +#include +#include + + +static inline u32 extif_read32(struct ssb_extif *extif, u16 offset) +{ + return ssb_read32(extif->dev, offset); +} + +static inline void extif_write32(struct ssb_extif *extif, u16 offset, u32 value) +{ + ssb_write32(extif->dev, offset, value); +} + +static inline u32 extif_write32_masked(struct ssb_extif *extif, u16 offset, + u32 mask, u32 value) +{ + value &= mask; + value |= extif_read32(extif, offset) & ~mask; + extif_write32(extif, offset, value); + + return value; +} + +#ifdef CONFIG_SSB_SERIAL +static bool serial_exists(u8 *regs) +{ + u8 save_mcr, msr = 0; + + if (regs) { + save_mcr = regs[UART_MCR]; + regs[UART_MCR] = (UART_MCR_LOOP | UART_MCR_OUT2 | UART_MCR_RTS); + msr = regs[UART_MSR] & (UART_MSR_DCD | UART_MSR_RI + | UART_MSR_CTS | UART_MSR_DSR); + regs[UART_MCR] = save_mcr; + } + return (msr == (UART_MSR_DCD | UART_MSR_CTS)); +} + +int ssb_extif_serial_init(struct ssb_extif *extif, struct ssb_serial_port *ports) +{ + u32 i, nr_ports = 0; + + /* Disable GPIO interrupt initially */ + extif_write32(extif, SSB_EXTIF_GPIO_INTPOL, 0); + extif_write32(extif, SSB_EXTIF_GPIO_INTMASK, 0); + + for (i = 0; i < 2; i++) { + void __iomem *uart_regs; + + uart_regs = ioremap(SSB_EUART, 16); + if (uart_regs) { + uart_regs += (i * 8); + + if (serial_exists(uart_regs) && ports) { + extif_write32(extif, SSB_EXTIF_GPIO_INTMASK, 2); + + nr_ports++; + ports[i].regs = uart_regs; + ports[i].irq = 2; + ports[i].baud_base = 13500000; + ports[i].reg_shift = 0; + } + iounmap(uart_regs); + } + } + return nr_ports; +} +#endif /* CONFIG_SSB_SERIAL */ + +void ssb_extif_timing_init(struct ssb_extif *extif, unsigned long ns) +{ + u32 tmp; + + /* Initialize extif so we can get to the LEDs and external UART */ + extif_write32(extif, SSB_EXTIF_PROG_CFG, SSB_EXTCFG_EN); + + /* Set timing for the flash */ + tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT; + tmp |= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT; + tmp |= DIV_ROUND_UP(120, ns); + extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp); + + /* Set programmable interface timing for external uart */ + tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT; + tmp |= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT; + tmp |= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT; + tmp |= DIV_ROUND_UP(120, ns); + extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp); +} + +void ssb_extif_get_clockcontrol(struct ssb_extif *extif, + u32 *pll_type, u32 *n, u32 *m) +{ + *pll_type = SSB_PLLTYPE_1; + *n = extif_read32(extif, SSB_EXTIF_CLOCK_N); + *m = extif_read32(extif, SSB_EXTIF_CLOCK_SB); +} + +u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks) +{ + struct ssb_extif *extif = bcm47xx_wdt_get_drvdata(wdt); + + return ssb_extif_watchdog_timer_set(extif, ticks); +} + +u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms) +{ + struct ssb_extif *extif = bcm47xx_wdt_get_drvdata(wdt); + u32 ticks = (SSB_EXTIF_WATCHDOG_CLK / 1000) * ms; + + ticks = ssb_extif_watchdog_timer_set(extif, ticks); + + return (ticks * 1000) / SSB_EXTIF_WATCHDOG_CLK; +} + +u32 ssb_extif_watchdog_timer_set(struct ssb_extif *extif, u32 ticks) +{ + if (ticks > SSB_EXTIF_WATCHDOG_MAX_TIMER) + ticks = SSB_EXTIF_WATCHDOG_MAX_TIMER; + extif_write32(extif, SSB_EXTIF_WATCHDOG, ticks); + + return ticks; +} + +void ssb_extif_init(struct ssb_extif *extif) +{ + if (!extif->dev) + return; /* We don't have a Extif core */ + spin_lock_init(&extif->gpio_lock); +} + +u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask) +{ + return extif_read32(extif, SSB_EXTIF_GPIO_IN) & mask; +} + +u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value) +{ + unsigned long flags; + u32 res = 0; + + spin_lock_irqsave(&extif->gpio_lock, flags); + res = extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0), + mask, value); + spin_unlock_irqrestore(&extif->gpio_lock, flags); + + return res; +} + +u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value) +{ + unsigned long flags; + u32 res = 0; + + spin_lock_irqsave(&extif->gpio_lock, flags); + res = extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0), + mask, value); + spin_unlock_irqrestore(&extif->gpio_lock, flags); + + return res; +} + +u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value) +{ + unsigned long flags; + u32 res = 0; + + spin_lock_irqsave(&extif->gpio_lock, flags); + res = extif_write32_masked(extif, SSB_EXTIF_GPIO_INTPOL, mask, value); + spin_unlock_irqrestore(&extif->gpio_lock, flags); + + return res; +} + +u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value) +{ + unsigned long flags; + u32 res = 0; + + spin_lock_irqsave(&extif->gpio_lock, flags); + res = extif_write32_masked(extif, SSB_EXTIF_GPIO_INTMASK, mask, value); + spin_unlock_irqrestore(&extif->gpio_lock, flags); + + return res; +} -- cgit v1.2.3