From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/ssb/sdio.c | 605 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 605 insertions(+) create mode 100644 drivers/ssb/sdio.c (limited to 'drivers/ssb/sdio.c') diff --git a/drivers/ssb/sdio.c b/drivers/ssb/sdio.c new file mode 100644 index 000000000..66c5c2169 --- /dev/null +++ b/drivers/ssb/sdio.c @@ -0,0 +1,605 @@ +/* + * Sonics Silicon Backplane + * SDIO-Hostbus related functions + * + * Copyright 2009 Albert Herranz + * + * Based on drivers/ssb/pcmcia.c + * Copyright 2006 Johannes Berg + * Copyright 2007-2008 Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + * + */ + +#include "ssb_private.h" + +#include +#include +#include +#include +#include + +/* Define the following to 1 to enable a printk on each coreswitch. */ +#define SSB_VERBOSE_SDIOCORESWITCH_DEBUG 0 + + +/* Hardware invariants CIS tuples */ +#define SSB_SDIO_CIS 0x80 +#define SSB_SDIO_CIS_SROMREV 0x00 +#define SSB_SDIO_CIS_ID 0x01 +#define SSB_SDIO_CIS_BOARDREV 0x02 +#define SSB_SDIO_CIS_PA 0x03 +#define SSB_SDIO_CIS_PA_PA0B0_LO 0 +#define SSB_SDIO_CIS_PA_PA0B0_HI 1 +#define SSB_SDIO_CIS_PA_PA0B1_LO 2 +#define SSB_SDIO_CIS_PA_PA0B1_HI 3 +#define SSB_SDIO_CIS_PA_PA0B2_LO 4 +#define SSB_SDIO_CIS_PA_PA0B2_HI 5 +#define SSB_SDIO_CIS_PA_ITSSI 6 +#define SSB_SDIO_CIS_PA_MAXPOW 7 +#define SSB_SDIO_CIS_OEMNAME 0x04 +#define SSB_SDIO_CIS_CCODE 0x05 +#define SSB_SDIO_CIS_ANTENNA 0x06 +#define SSB_SDIO_CIS_ANTGAIN 0x07 +#define SSB_SDIO_CIS_BFLAGS 0x08 +#define SSB_SDIO_CIS_LEDS 0x09 + +#define CISTPL_FUNCE_LAN_NODE_ID 0x04 /* same as in PCMCIA */ + + +/* + * Function 1 miscellaneous registers. + * + * Definitions match src/include/sbsdio.h from the + * Android Open Source Project + * http://android.git.kernel.org/?p=platform/system/wlan/broadcom.git + * + */ +#define SBSDIO_FUNC1_SBADDRLOW 0x1000a /* SB Address window Low (b15) */ +#define SBSDIO_FUNC1_SBADDRMID 0x1000b /* SB Address window Mid (b23-b16) */ +#define SBSDIO_FUNC1_SBADDRHIGH 0x1000c /* SB Address window High (b24-b31) */ + +/* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */ +#define SBSDIO_SBADDRLOW_MASK 0x80 /* Valid address bits in SBADDRLOW */ +#define SBSDIO_SBADDRMID_MASK 0xff /* Valid address bits in SBADDRMID */ +#define SBSDIO_SBADDRHIGH_MASK 0xff /* Valid address bits in SBADDRHIGH */ + +#define SBSDIO_SB_OFT_ADDR_MASK 0x7FFF /* sb offset addr is <= 15 bits, 32k */ + +/* REVISIT: this flag doesn't seem to matter */ +#define SBSDIO_SB_ACCESS_2_4B_FLAG 0x8000 /* forces 32-bit SB access */ + + +/* + * Address map within the SDIO function address space (128K). + * + * Start End Description + * ------- ------- ------------------------------------------ + * 0x00000 0x0ffff selected backplane address window (64K) + * 0x10000 0x1ffff backplane control registers (max 64K) + * + * The current address window is configured by writing to registers + * SBADDRLOW, SBADDRMID and SBADDRHIGH. + * + * In order to access the contents of a 32-bit Silicon Backplane address + * the backplane address window must be first loaded with the highest + * 16 bits of the target address. Then, an access must be done to the + * SDIO function address space using the lower 15 bits of the address. + * Bit 15 of the address must be set when doing 32 bit accesses. + * + * 10987654321098765432109876543210 + * WWWWWWWWWWWWWWWWW SB Address Window + * OOOOOOOOOOOOOOOO Offset within SB Address Window + * a 32-bit access flag + */ + + +/* + * SSB I/O via SDIO. + * + * NOTE: SDIO address @addr is 17 bits long (SDIO address space is 128K). + */ + +static inline struct device *ssb_sdio_dev(struct ssb_bus *bus) +{ + return &bus->host_sdio->dev; +} + +/* host claimed */ +static int ssb_sdio_writeb(struct ssb_bus *bus, unsigned int addr, u8 val) +{ + int error = 0; + + sdio_writeb(bus->host_sdio, val, addr, &error); + if (unlikely(error)) { + dev_dbg(ssb_sdio_dev(bus), "%08X <- %02x, error %d\n", + addr, val, error); + } + + return error; +} + +#if 0 +static u8 ssb_sdio_readb(struct ssb_bus *bus, unsigned int addr) +{ + u8 val; + int error = 0; + + val = sdio_readb(bus->host_sdio, addr, &error); + if (unlikely(error)) { + dev_dbg(ssb_sdio_dev(bus), "%08X -> %02x, error %d\n", + addr, val, error); + } + + return val; +} +#endif + +/* host claimed */ +static int ssb_sdio_set_sbaddr_window(struct ssb_bus *bus, u32 address) +{ + int error; + + error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRLOW, + (address >> 8) & SBSDIO_SBADDRLOW_MASK); + if (error) + goto out; + error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRMID, + (address >> 16) & SBSDIO_SBADDRMID_MASK); + if (error) + goto out; + error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRHIGH, + (address >> 24) & SBSDIO_SBADDRHIGH_MASK); + if (error) + goto out; + bus->sdio_sbaddr = address; +out: + if (error) { + dev_dbg(ssb_sdio_dev(bus), "failed to set address window" + " to 0x%08x, error %d\n", address, error); + } + + return error; +} + +/* for enumeration use only */ +u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset) +{ + u32 val; + int error; + + sdio_claim_host(bus->host_sdio); + val = sdio_readl(bus->host_sdio, offset, &error); + sdio_release_host(bus->host_sdio); + if (unlikely(error)) { + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n", + bus->sdio_sbaddr >> 16, offset, val, error); + } + + return val; +} + +/* for enumeration use only */ +int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx) +{ + u32 sbaddr; + int error; + + sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE; + sdio_claim_host(bus->host_sdio); + error = ssb_sdio_set_sbaddr_window(bus, sbaddr); + sdio_release_host(bus->host_sdio); + if (error) { + dev_err(ssb_sdio_dev(bus), "failed to switch to core %u," + " error %d\n", coreidx, error); + goto out; + } +out: + return error; +} + +/* host must be already claimed */ +static int ssb_sdio_switch_core(struct ssb_bus *bus, struct ssb_device *dev) +{ + u8 coreidx = dev->core_index; + u32 sbaddr; + int error = 0; + + sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE; + if (unlikely(bus->sdio_sbaddr != sbaddr)) { +#if SSB_VERBOSE_SDIOCORESWITCH_DEBUG + dev_info(ssb_sdio_dev(bus), + "switching to %s core, index %d\n", + ssb_core_name(dev->id.coreid), coreidx); +#endif + error = ssb_sdio_set_sbaddr_window(bus, sbaddr); + if (error) { + dev_dbg(ssb_sdio_dev(bus), "failed to switch to" + " core %u, error %d\n", coreidx, error); + goto out; + } + bus->mapped_device = dev; + } + +out: + return error; +} + +static u8 ssb_sdio_read8(struct ssb_device *dev, u16 offset) +{ + struct ssb_bus *bus = dev->bus; + u8 val = 0xff; + int error = 0; + + sdio_claim_host(bus->host_sdio); + if (unlikely(ssb_sdio_switch_core(bus, dev))) + goto out; + offset |= bus->sdio_sbaddr & 0xffff; + offset &= SBSDIO_SB_OFT_ADDR_MASK; + val = sdio_readb(bus->host_sdio, offset, &error); + if (error) { + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %02x, error %d\n", + bus->sdio_sbaddr >> 16, offset, val, error); + } +out: + sdio_release_host(bus->host_sdio); + + return val; +} + +static u16 ssb_sdio_read16(struct ssb_device *dev, u16 offset) +{ + struct ssb_bus *bus = dev->bus; + u16 val = 0xffff; + int error = 0; + + sdio_claim_host(bus->host_sdio); + if (unlikely(ssb_sdio_switch_core(bus, dev))) + goto out; + offset |= bus->sdio_sbaddr & 0xffff; + offset &= SBSDIO_SB_OFT_ADDR_MASK; + val = sdio_readw(bus->host_sdio, offset, &error); + if (error) { + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %04x, error %d\n", + bus->sdio_sbaddr >> 16, offset, val, error); + } +out: + sdio_release_host(bus->host_sdio); + + return val; +} + +static u32 ssb_sdio_read32(struct ssb_device *dev, u16 offset) +{ + struct ssb_bus *bus = dev->bus; + u32 val = 0xffffffff; + int error = 0; + + sdio_claim_host(bus->host_sdio); + if (unlikely(ssb_sdio_switch_core(bus, dev))) + goto out; + offset |= bus->sdio_sbaddr & 0xffff; + offset &= SBSDIO_SB_OFT_ADDR_MASK; + offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */ + val = sdio_readl(bus->host_sdio, offset, &error); + if (error) { + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n", + bus->sdio_sbaddr >> 16, offset, val, error); + } +out: + sdio_release_host(bus->host_sdio); + + return val; +} + +#ifdef CONFIG_SSB_BLOCKIO +static void ssb_sdio_block_read(struct ssb_device *dev, void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + size_t saved_count = count; + struct ssb_bus *bus = dev->bus; + int error = 0; + + sdio_claim_host(bus->host_sdio); + if (unlikely(ssb_sdio_switch_core(bus, dev))) { + error = -EIO; + memset(buffer, 0xff, count); + goto err_out; + } + offset |= bus->sdio_sbaddr & 0xffff; + offset &= SBSDIO_SB_OFT_ADDR_MASK; + + switch (reg_width) { + case sizeof(u8): { + error = sdio_readsb(bus->host_sdio, buffer, offset, count); + break; + } + case sizeof(u16): { + WARN_ON(count & 1); + error = sdio_readsb(bus->host_sdio, buffer, offset, count); + break; + } + case sizeof(u32): { + WARN_ON(count & 3); + offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */ + error = sdio_readsb(bus->host_sdio, buffer, offset, count); + break; + } + default: + WARN_ON(1); + } + if (!error) + goto out; + +err_out: + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%zu), error %d\n", + bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error); +out: + sdio_release_host(bus->host_sdio); +} +#endif /* CONFIG_SSB_BLOCKIO */ + +static void ssb_sdio_write8(struct ssb_device *dev, u16 offset, u8 val) +{ + struct ssb_bus *bus = dev->bus; + int error = 0; + + sdio_claim_host(bus->host_sdio); + if (unlikely(ssb_sdio_switch_core(bus, dev))) + goto out; + offset |= bus->sdio_sbaddr & 0xffff; + offset &= SBSDIO_SB_OFT_ADDR_MASK; + sdio_writeb(bus->host_sdio, val, offset, &error); + if (error) { + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %02x, error %d\n", + bus->sdio_sbaddr >> 16, offset, val, error); + } +out: + sdio_release_host(bus->host_sdio); +} + +static void ssb_sdio_write16(struct ssb_device *dev, u16 offset, u16 val) +{ + struct ssb_bus *bus = dev->bus; + int error = 0; + + sdio_claim_host(bus->host_sdio); + if (unlikely(ssb_sdio_switch_core(bus, dev))) + goto out; + offset |= bus->sdio_sbaddr & 0xffff; + offset &= SBSDIO_SB_OFT_ADDR_MASK; + sdio_writew(bus->host_sdio, val, offset, &error); + if (error) { + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %04x, error %d\n", + bus->sdio_sbaddr >> 16, offset, val, error); + } +out: + sdio_release_host(bus->host_sdio); +} + +static void ssb_sdio_write32(struct ssb_device *dev, u16 offset, u32 val) +{ + struct ssb_bus *bus = dev->bus; + int error = 0; + + sdio_claim_host(bus->host_sdio); + if (unlikely(ssb_sdio_switch_core(bus, dev))) + goto out; + offset |= bus->sdio_sbaddr & 0xffff; + offset &= SBSDIO_SB_OFT_ADDR_MASK; + offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */ + sdio_writel(bus->host_sdio, val, offset, &error); + if (error) { + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %08x, error %d\n", + bus->sdio_sbaddr >> 16, offset, val, error); + } + if (bus->quirks & SSB_QUIRK_SDIO_READ_AFTER_WRITE32) + sdio_readl(bus->host_sdio, 0, &error); +out: + sdio_release_host(bus->host_sdio); +} + +#ifdef CONFIG_SSB_BLOCKIO +static void ssb_sdio_block_write(struct ssb_device *dev, const void *buffer, + size_t count, u16 offset, u8 reg_width) +{ + size_t saved_count = count; + struct ssb_bus *bus = dev->bus; + int error = 0; + + sdio_claim_host(bus->host_sdio); + if (unlikely(ssb_sdio_switch_core(bus, dev))) { + error = -EIO; + goto err_out; + } + offset |= bus->sdio_sbaddr & 0xffff; + offset &= SBSDIO_SB_OFT_ADDR_MASK; + + switch (reg_width) { + case sizeof(u8): + error = sdio_writesb(bus->host_sdio, offset, + (void *)buffer, count); + break; + case sizeof(u16): + WARN_ON(count & 1); + error = sdio_writesb(bus->host_sdio, offset, + (void *)buffer, count); + break; + case sizeof(u32): + WARN_ON(count & 3); + offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */ + error = sdio_writesb(bus->host_sdio, offset, + (void *)buffer, count); + break; + default: + WARN_ON(1); + } + if (!error) + goto out; + +err_out: + dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%zu), error %d\n", + bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error); +out: + sdio_release_host(bus->host_sdio); +} + +#endif /* CONFIG_SSB_BLOCKIO */ + +/* Not "static", as it's used in main.c */ +const struct ssb_bus_ops ssb_sdio_ops = { + .read8 = ssb_sdio_read8, + .read16 = ssb_sdio_read16, + .read32 = ssb_sdio_read32, + .write8 = ssb_sdio_write8, + .write16 = ssb_sdio_write16, + .write32 = ssb_sdio_write32, +#ifdef CONFIG_SSB_BLOCKIO + .block_read = ssb_sdio_block_read, + .block_write = ssb_sdio_block_write, +#endif +}; + +#define GOTO_ERROR_ON(condition, description) do { \ + if (unlikely(condition)) { \ + error_description = description; \ + goto error; \ + } \ + } while (0) + +int ssb_sdio_get_invariants(struct ssb_bus *bus, + struct ssb_init_invariants *iv) +{ + struct ssb_sprom *sprom = &iv->sprom; + struct ssb_boardinfo *bi = &iv->boardinfo; + const char *error_description = "none"; + struct sdio_func_tuple *tuple; + void *mac; + + memset(sprom, 0xFF, sizeof(*sprom)); + sprom->boardflags_lo = 0; + sprom->boardflags_hi = 0; + + tuple = bus->host_sdio->tuples; + while (tuple) { + switch (tuple->code) { + case 0x22: /* extended function */ + switch (tuple->data[0]) { + case CISTPL_FUNCE_LAN_NODE_ID: + GOTO_ERROR_ON((tuple->size != 7) && + (tuple->data[1] != 6), + "mac tpl size"); + /* fetch the MAC address. */ + mac = tuple->data + 2; + memcpy(sprom->il0mac, mac, ETH_ALEN); + memcpy(sprom->et1mac, mac, ETH_ALEN); + break; + default: + break; + } + break; + case 0x80: /* vendor specific tuple */ + switch (tuple->data[0]) { + case SSB_SDIO_CIS_SROMREV: + GOTO_ERROR_ON(tuple->size != 2, + "sromrev tpl size"); + sprom->revision = tuple->data[1]; + break; + case SSB_SDIO_CIS_ID: + GOTO_ERROR_ON((tuple->size != 5) && + (tuple->size != 7), + "id tpl size"); + bi->vendor = tuple->data[1] | + (tuple->data[2]<<8); + break; + case SSB_SDIO_CIS_BOARDREV: + GOTO_ERROR_ON(tuple->size != 2, + "boardrev tpl size"); + sprom->board_rev = tuple->data[1]; + break; + case SSB_SDIO_CIS_PA: + GOTO_ERROR_ON((tuple->size != 9) && + (tuple->size != 10), + "pa tpl size"); + sprom->pa0b0 = tuple->data[1] | + ((u16)tuple->data[2] << 8); + sprom->pa0b1 = tuple->data[3] | + ((u16)tuple->data[4] << 8); + sprom->pa0b2 = tuple->data[5] | + ((u16)tuple->data[6] << 8); + sprom->itssi_a = tuple->data[7]; + sprom->itssi_bg = tuple->data[7]; + sprom->maxpwr_a = tuple->data[8]; + sprom->maxpwr_bg = tuple->data[8]; + break; + case SSB_SDIO_CIS_OEMNAME: + /* Not present */ + break; + case SSB_SDIO_CIS_CCODE: + GOTO_ERROR_ON(tuple->size != 2, + "ccode tpl size"); + sprom->country_code = tuple->data[1]; + break; + case SSB_SDIO_CIS_ANTENNA: + GOTO_ERROR_ON(tuple->size != 2, + "ant tpl size"); + sprom->ant_available_a = tuple->data[1]; + sprom->ant_available_bg = tuple->data[1]; + break; + case SSB_SDIO_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple->size != 2, + "antg tpl size"); + sprom->antenna_gain.a0 = tuple->data[1]; + sprom->antenna_gain.a1 = tuple->data[1]; + sprom->antenna_gain.a2 = tuple->data[1]; + sprom->antenna_gain.a3 = tuple->data[1]; + break; + case SSB_SDIO_CIS_BFLAGS: + GOTO_ERROR_ON((tuple->size != 3) && + (tuple->size != 5), + "bfl tpl size"); + sprom->boardflags_lo = tuple->data[1] | + ((u16)tuple->data[2] << 8); + break; + case SSB_SDIO_CIS_LEDS: + GOTO_ERROR_ON(tuple->size != 5, + "leds tpl size"); + sprom->gpio0 = tuple->data[1]; + sprom->gpio1 = tuple->data[2]; + sprom->gpio2 = tuple->data[3]; + sprom->gpio3 = tuple->data[4]; + break; + default: + break; + } + break; + default: + break; + } + tuple = tuple->next; + } + + return 0; +error: + dev_err(ssb_sdio_dev(bus), "failed to fetch device invariants: %s\n", + error_description); + return -ENODEV; +} + +void ssb_sdio_exit(struct ssb_bus *bus) +{ + if (bus->bustype != SSB_BUSTYPE_SDIO) + return; + /* Nothing to do here. */ +} + +int ssb_sdio_init(struct ssb_bus *bus) +{ + if (bus->bustype != SSB_BUSTYPE_SDIO) + return 0; + + bus->sdio_sbaddr = ~0; + + return 0; +} -- cgit v1.2.3