From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/target/target_core_fabric_lib.c | 419 ++++++++++++++++++++++++++++++++ 1 file changed, 419 insertions(+) create mode 100644 drivers/target/target_core_fabric_lib.c (limited to 'drivers/target/target_core_fabric_lib.c') diff --git a/drivers/target/target_core_fabric_lib.c b/drivers/target/target_core_fabric_lib.c new file mode 100644 index 000000000..6600ae44f --- /dev/null +++ b/drivers/target/target_core_fabric_lib.c @@ -0,0 +1,419 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/******************************************************************************* + * Filename: target_core_fabric_lib.c + * + * This file contains generic high level protocol identifier and PR + * handlers for TCM fabric modules + * + * (c) Copyright 2010-2013 Datera, Inc. + * + * Nicholas A. Bellinger + * + ******************************************************************************/ + +/* + * See SPC4, section 7.5 "Protocol specific parameters" for details + * on the formats implemented in this file. + */ + +#include +#include +#include +#include +#include +#include + +#include + +#include +#include + +#include "target_core_internal.h" +#include "target_core_pr.h" + + +static int sas_get_pr_transport_id( + struct se_node_acl *nacl, + int *format_code, + unsigned char *buf) +{ + int ret; + + /* Skip over 'naa. prefix */ + ret = hex2bin(&buf[4], &nacl->initiatorname[4], 8); + if (ret) { + pr_debug("%s: invalid hex string\n", __func__); + return ret; + } + + return 24; +} + +static int fc_get_pr_transport_id( + struct se_node_acl *se_nacl, + int *format_code, + unsigned char *buf) +{ + unsigned char *ptr; + int i, ret; + u32 off = 8; + + /* + * We convert the ASCII formatted N Port name into a binary + * encoded TransportID. + */ + ptr = &se_nacl->initiatorname[0]; + for (i = 0; i < 23; ) { + if (!strncmp(&ptr[i], ":", 1)) { + i++; + continue; + } + ret = hex2bin(&buf[off++], &ptr[i], 1); + if (ret < 0) { + pr_debug("%s: invalid hex string\n", __func__); + return ret; + } + i += 2; + } + /* + * The FC Transport ID is a hardcoded 24-byte length + */ + return 24; +} + +static int sbp_get_pr_transport_id( + struct se_node_acl *nacl, + int *format_code, + unsigned char *buf) +{ + int ret; + + ret = hex2bin(&buf[8], nacl->initiatorname, 8); + if (ret) { + pr_debug("%s: invalid hex string\n", __func__); + return ret; + } + + return 24; +} + +static int srp_get_pr_transport_id( + struct se_node_acl *nacl, + int *format_code, + unsigned char *buf) +{ + const char *p; + unsigned len, count, leading_zero_bytes; + int rc; + + p = nacl->initiatorname; + if (strncasecmp(p, "0x", 2) == 0) + p += 2; + len = strlen(p); + if (len % 2) + return -EINVAL; + + count = min(len / 2, 16U); + leading_zero_bytes = 16 - count; + memset(buf + 8, 0, leading_zero_bytes); + rc = hex2bin(buf + 8 + leading_zero_bytes, p, count); + if (rc < 0) { + pr_debug("hex2bin failed for %s: %d\n", p, rc); + return rc; + } + + return 24; +} + +static int iscsi_get_pr_transport_id( + struct se_node_acl *se_nacl, + struct t10_pr_registration *pr_reg, + int *format_code, + unsigned char *buf) +{ + u32 off = 4, padding = 0; + int isid_len; + u16 len = 0; + + spin_lock_irq(&se_nacl->nacl_sess_lock); + /* + * Only null terminate the last field. + * + * From spc4r37 section 7.6.4.6: TransportID for initiator ports using + * SCSI over iSCSI. + * + * Table 507 TPID=0 Initiator device TransportID + * + * The null-terminated, null-padded (see 4.3.2) ISCSI NAME field shall + * contain the iSCSI name of an iSCSI initiator node (see RFC 7143). + * The first ISCSI NAME field byte containing an ASCII null character + * terminates the ISCSI NAME field without regard for the specified + * length of the iSCSI TransportID or the contents of the ADDITIONAL + * LENGTH field. + */ + len = sprintf(&buf[off], "%s", se_nacl->initiatorname); + off += len; + if ((*format_code == 1) && (pr_reg->isid_present_at_reg)) { + /* + * Set FORMAT CODE 01b for iSCSI Initiator port TransportID + * format. + */ + buf[0] |= 0x40; + /* + * From spc4r37 Section 7.6.4.6 + * + * Table 508 TPID=1 Initiator port TransportID. + * + * The ISCSI NAME field shall not be null-terminated + * (see 4.3.2) and shall not be padded. + * + * The SEPARATOR field shall contain the five ASCII + * characters ",i,0x". + * + * The null-terminated, null-padded ISCSI INITIATOR SESSION ID + * field shall contain the iSCSI initiator session identifier + * (see RFC 3720) in the form of ASCII characters that are the + * hexadecimal digits converted from the binary iSCSI initiator + * session identifier value. The first ISCSI INITIATOR SESSION + * ID field byte containing an ASCII null character terminates + * the ISCSI INITIATOR SESSION ID field without regard for the + * specified length of the iSCSI TransportID or the contents + * of the ADDITIONAL LENGTH field. + */ + buf[off++] = 0x2c; /* ASCII Character: "," */ + buf[off++] = 0x69; /* ASCII Character: "i" */ + buf[off++] = 0x2c; /* ASCII Character: "," */ + buf[off++] = 0x30; /* ASCII Character: "0" */ + buf[off++] = 0x78; /* ASCII Character: "x" */ + len += 5; + + isid_len = sprintf(buf + off, "%s", pr_reg->pr_reg_isid); + off += isid_len; + len += isid_len; + } + buf[off] = '\0'; + len += 1; + spin_unlock_irq(&se_nacl->nacl_sess_lock); + /* + * The ADDITIONAL LENGTH field specifies the number of bytes that follow + * in the TransportID. The additional length shall be at least 20 and + * shall be a multiple of four. + */ + padding = ((-len) & 3); + if (padding != 0) + len += padding; + + put_unaligned_be16(len, &buf[2]); + /* + * Increment value for total payload + header length for + * full status descriptor + */ + len += 4; + + return len; +} + +static int iscsi_get_pr_transport_id_len( + struct se_node_acl *se_nacl, + struct t10_pr_registration *pr_reg, + int *format_code) +{ + u32 len = 0, padding = 0; + + spin_lock_irq(&se_nacl->nacl_sess_lock); + len = strlen(se_nacl->initiatorname); + /* + * Add extra byte for NULL terminator + */ + len++; + /* + * If there is ISID present with the registration, use format code: + * 01b: iSCSI Initiator port TransportID format + * + * If there is not an active iSCSI session, use format code: + * 00b: iSCSI Initiator device TransportID format + */ + if (pr_reg->isid_present_at_reg) { + len += 5; /* For ",i,0x" ASCII separator */ + len += strlen(pr_reg->pr_reg_isid); + *format_code = 1; + } else + *format_code = 0; + spin_unlock_irq(&se_nacl->nacl_sess_lock); + /* + * The ADDITIONAL LENGTH field specifies the number of bytes that follow + * in the TransportID. The additional length shall be at least 20 and + * shall be a multiple of four. + */ + padding = ((-len) & 3); + if (padding != 0) + len += padding; + /* + * Increment value for total payload + header length for + * full status descriptor + */ + len += 4; + + return len; +} + +static char *iscsi_parse_pr_out_transport_id( + struct se_portal_group *se_tpg, + char *buf, + u32 *out_tid_len, + char **port_nexus_ptr) +{ + char *p; + int i; + u8 format_code = (buf[0] & 0xc0); + /* + * Check for FORMAT CODE 00b or 01b from spc4r17, section 7.5.4.6: + * + * TransportID for initiator ports using SCSI over iSCSI, + * from Table 388 -- iSCSI TransportID formats. + * + * 00b Initiator port is identified using the world wide unique + * SCSI device name of the iSCSI initiator + * device containing the initiator port (see table 389). + * 01b Initiator port is identified using the world wide unique + * initiator port identifier (see table 390).10b to 11b + * Reserved + */ + if ((format_code != 0x00) && (format_code != 0x40)) { + pr_err("Illegal format code: 0x%02x for iSCSI" + " Initiator Transport ID\n", format_code); + return NULL; + } + /* + * If the caller wants the TransportID Length, we set that value for the + * entire iSCSI Tarnsport ID now. + */ + if (out_tid_len) { + /* The shift works thanks to integer promotion rules */ + *out_tid_len = get_unaligned_be16(&buf[2]); + /* Add four bytes for iSCSI Transport ID header */ + *out_tid_len += 4; + } + + /* + * Check for ',i,0x' separator between iSCSI Name and iSCSI Initiator + * Session ID as defined in Table 390 - iSCSI initiator port TransportID + * format. + */ + if (format_code == 0x40) { + p = strstr(&buf[4], ",i,0x"); + if (!p) { + pr_err("Unable to locate \",i,0x\" separator" + " for Initiator port identifier: %s\n", + &buf[4]); + return NULL; + } + *p = '\0'; /* Terminate iSCSI Name */ + p += 5; /* Skip over ",i,0x" separator */ + + *port_nexus_ptr = p; + /* + * Go ahead and do the lower case conversion of the received + * 12 ASCII characters representing the ISID in the TransportID + * for comparison against the running iSCSI session's ISID from + * iscsi_target.c:lio_sess_get_initiator_sid() + */ + for (i = 0; i < 12; i++) { + /* + * The first ISCSI INITIATOR SESSION ID field byte + * containing an ASCII null character terminates the + * ISCSI INITIATOR SESSION ID field without regard for + * the specified length of the iSCSI TransportID or the + * contents of the ADDITIONAL LENGTH field. + */ + if (*p == '\0') + break; + + if (isdigit(*p)) { + p++; + continue; + } + *p = tolower(*p); + p++; + } + } else + *port_nexus_ptr = NULL; + + return &buf[4]; +} + +int target_get_pr_transport_id_len(struct se_node_acl *nacl, + struct t10_pr_registration *pr_reg, int *format_code) +{ + switch (nacl->se_tpg->proto_id) { + case SCSI_PROTOCOL_FCP: + case SCSI_PROTOCOL_SBP: + case SCSI_PROTOCOL_SRP: + case SCSI_PROTOCOL_SAS: + break; + case SCSI_PROTOCOL_ISCSI: + return iscsi_get_pr_transport_id_len(nacl, pr_reg, format_code); + default: + pr_err("Unknown proto_id: 0x%02x\n", nacl->se_tpg->proto_id); + return -EINVAL; + } + + /* + * Most transports use a fixed length 24 byte identifier. + */ + *format_code = 0; + return 24; +} + +int target_get_pr_transport_id(struct se_node_acl *nacl, + struct t10_pr_registration *pr_reg, int *format_code, + unsigned char *buf) +{ + switch (nacl->se_tpg->proto_id) { + case SCSI_PROTOCOL_SAS: + return sas_get_pr_transport_id(nacl, format_code, buf); + case SCSI_PROTOCOL_SBP: + return sbp_get_pr_transport_id(nacl, format_code, buf); + case SCSI_PROTOCOL_SRP: + return srp_get_pr_transport_id(nacl, format_code, buf); + case SCSI_PROTOCOL_FCP: + return fc_get_pr_transport_id(nacl, format_code, buf); + case SCSI_PROTOCOL_ISCSI: + return iscsi_get_pr_transport_id(nacl, pr_reg, format_code, + buf); + default: + pr_err("Unknown proto_id: 0x%02x\n", nacl->se_tpg->proto_id); + return -EINVAL; + } +} + +const char *target_parse_pr_out_transport_id(struct se_portal_group *tpg, + char *buf, u32 *out_tid_len, char **port_nexus_ptr) +{ + u32 offset; + + switch (tpg->proto_id) { + case SCSI_PROTOCOL_SAS: + /* + * Assume the FORMAT CODE 00b from spc4r17, 7.5.4.7 TransportID + * for initiator ports using SCSI over SAS Serial SCSI Protocol. + */ + offset = 4; + break; + case SCSI_PROTOCOL_SBP: + case SCSI_PROTOCOL_SRP: + case SCSI_PROTOCOL_FCP: + offset = 8; + break; + case SCSI_PROTOCOL_ISCSI: + return iscsi_parse_pr_out_transport_id(tpg, buf, out_tid_len, + port_nexus_ptr); + default: + pr_err("Unknown proto_id: 0x%02x\n", tpg->proto_id); + return NULL; + } + + *port_nexus_ptr = NULL; + *out_tid_len = 24; + return buf + offset; +} -- cgit v1.2.3