From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/tee/optee/optee_smc.h | 579 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 579 insertions(+) create mode 100644 drivers/tee/optee/optee_smc.h (limited to 'drivers/tee/optee/optee_smc.h') diff --git a/drivers/tee/optee/optee_smc.h b/drivers/tee/optee/optee_smc.h new file mode 100644 index 000000000..73b5e7760 --- /dev/null +++ b/drivers/tee/optee/optee_smc.h @@ -0,0 +1,579 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) */ +/* + * Copyright (c) 2015-2021, Linaro Limited + */ +#ifndef OPTEE_SMC_H +#define OPTEE_SMC_H + +#include +#include + +#define OPTEE_SMC_STD_CALL_VAL(func_num) \ + ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, ARM_SMCCC_SMC_32, \ + ARM_SMCCC_OWNER_TRUSTED_OS, (func_num)) +#define OPTEE_SMC_FAST_CALL_VAL(func_num) \ + ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_32, \ + ARM_SMCCC_OWNER_TRUSTED_OS, (func_num)) + +/* + * Function specified by SMC Calling convention. + */ +#define OPTEE_SMC_FUNCID_CALLS_COUNT 0xFF00 +#define OPTEE_SMC_CALLS_COUNT \ + ARM_SMCCC_CALL_VAL(OPTEE_SMC_FAST_CALL, SMCCC_SMC_32, \ + SMCCC_OWNER_TRUSTED_OS_END, \ + OPTEE_SMC_FUNCID_CALLS_COUNT) + +/* + * Normal cached memory (write-back), shareable for SMP systems and not + * shareable for UP systems. + */ +#define OPTEE_SMC_SHM_CACHED 1 + +/* + * a0..a7 is used as register names in the descriptions below, on arm32 + * that translates to r0..r7 and on arm64 to w0..w7. In both cases it's + * 32-bit registers. + */ + +/* + * Function specified by SMC Calling convention + * + * Return the following UID if using API specified in this file + * without further extensions: + * 384fb3e0-e7f8-11e3-af63-0002a5d5c51b. + * see also OPTEE_MSG_UID_* in optee_msg.h + */ +#define OPTEE_SMC_FUNCID_CALLS_UID OPTEE_MSG_FUNCID_CALLS_UID +#define OPTEE_SMC_CALLS_UID \ + ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_32, \ + ARM_SMCCC_OWNER_TRUSTED_OS_END, \ + OPTEE_SMC_FUNCID_CALLS_UID) + +/* + * Function specified by SMC Calling convention + * + * Returns 2.0 if using API specified in this file without further extensions. + * see also OPTEE_MSG_REVISION_* in optee_msg.h + */ +#define OPTEE_SMC_FUNCID_CALLS_REVISION OPTEE_MSG_FUNCID_CALLS_REVISION +#define OPTEE_SMC_CALLS_REVISION \ + ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_32, \ + ARM_SMCCC_OWNER_TRUSTED_OS_END, \ + OPTEE_SMC_FUNCID_CALLS_REVISION) + +struct optee_smc_calls_revision_result { + unsigned long major; + unsigned long minor; + unsigned long reserved0; + unsigned long reserved1; +}; + +/* + * Get UUID of Trusted OS. + * + * Used by non-secure world to figure out which Trusted OS is installed. + * Note that returned UUID is the UUID of the Trusted OS, not of the API. + * + * Returns UUID in a0-4 in the same way as OPTEE_SMC_CALLS_UID + * described above. + */ +#define OPTEE_SMC_FUNCID_GET_OS_UUID OPTEE_MSG_FUNCID_GET_OS_UUID +#define OPTEE_SMC_CALL_GET_OS_UUID \ + OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_OS_UUID) + +/* + * Get revision of Trusted OS. + * + * Used by non-secure world to figure out which version of the Trusted OS + * is installed. Note that the returned revision is the revision of the + * Trusted OS, not of the API. + * + * Returns revision in a0-1 in the same way as OPTEE_SMC_CALLS_REVISION + * described above. May optionally return a 32-bit build identifier in a2, + * with zero meaning unspecified. + */ +#define OPTEE_SMC_FUNCID_GET_OS_REVISION OPTEE_MSG_FUNCID_GET_OS_REVISION +#define OPTEE_SMC_CALL_GET_OS_REVISION \ + OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_OS_REVISION) + +struct optee_smc_call_get_os_revision_result { + unsigned long major; + unsigned long minor; + unsigned long build_id; + unsigned long reserved1; +}; + +/* + * Call with struct optee_msg_arg as argument + * + * When called with OPTEE_SMC_CALL_WITH_RPC_ARG or + * OPTEE_SMC_CALL_WITH_REGD_ARG in a0 there is one RPC struct optee_msg_arg + * following after the first struct optee_msg_arg. The RPC struct + * optee_msg_arg has reserved space for the number of RPC parameters as + * returned by OPTEE_SMC_EXCHANGE_CAPABILITIES. + * + * When calling these functions, normal world has a few responsibilities: + * 1. It must be able to handle eventual RPCs + * 2. Non-secure interrupts should not be masked + * 3. If asynchronous notifications has been negotiated successfully, then + * the interrupt for asynchronous notifications should be unmasked + * during this call. + * + * Call register usage, OPTEE_SMC_CALL_WITH_ARG and + * OPTEE_SMC_CALL_WITH_RPC_ARG: + * a0 SMC Function ID, OPTEE_SMC_CALL_WITH_ARG or OPTEE_SMC_CALL_WITH_RPC_ARG + * a1 Upper 32 bits of a 64-bit physical pointer to a struct optee_msg_arg + * a2 Lower 32 bits of a 64-bit physical pointer to a struct optee_msg_arg + * a3 Cache settings, not used if physical pointer is in a predefined shared + * memory area else per OPTEE_SMC_SHM_* + * a4-6 Not used + * a7 Hypervisor Client ID register + * + * Call register usage, OPTEE_SMC_CALL_WITH_REGD_ARG: + * a0 SMC Function ID, OPTEE_SMC_CALL_WITH_REGD_ARG + * a1 Upper 32 bits of a 64-bit shared memory cookie + * a2 Lower 32 bits of a 64-bit shared memory cookie + * a3 Offset of the struct optee_msg_arg in the shared memory with the + * supplied cookie + * a4-6 Not used + * a7 Hypervisor Client ID register + * + * Normal return register usage: + * a0 Return value, OPTEE_SMC_RETURN_* + * a1-3 Not used + * a4-7 Preserved + * + * OPTEE_SMC_RETURN_ETHREAD_LIMIT return register usage: + * a0 Return value, OPTEE_SMC_RETURN_ETHREAD_LIMIT + * a1-3 Preserved + * a4-7 Preserved + * + * RPC return register usage: + * a0 Return value, OPTEE_SMC_RETURN_IS_RPC(val) + * a1-2 RPC parameters + * a3-7 Resume information, must be preserved + * + * Possible return values: + * OPTEE_SMC_RETURN_UNKNOWN_FUNCTION Trusted OS does not recognize this + * function. + * OPTEE_SMC_RETURN_OK Call completed, result updated in + * the previously supplied struct + * optee_msg_arg. + * OPTEE_SMC_RETURN_ETHREAD_LIMIT Number of Trusted OS threads exceeded, + * try again later. + * OPTEE_SMC_RETURN_EBADADDR Bad physical pointer to struct + * optee_msg_arg. + * OPTEE_SMC_RETURN_EBADCMD Bad/unknown cmd in struct optee_msg_arg + * OPTEE_SMC_RETURN_IS_RPC() Call suspended by RPC call to normal + * world. + */ +#define OPTEE_SMC_FUNCID_CALL_WITH_ARG OPTEE_MSG_FUNCID_CALL_WITH_ARG +#define OPTEE_SMC_CALL_WITH_ARG \ + OPTEE_SMC_STD_CALL_VAL(OPTEE_SMC_FUNCID_CALL_WITH_ARG) +#define OPTEE_SMC_CALL_WITH_RPC_ARG \ + OPTEE_SMC_STD_CALL_VAL(OPTEE_SMC_FUNCID_CALL_WITH_RPC_ARG) +#define OPTEE_SMC_CALL_WITH_REGD_ARG \ + OPTEE_SMC_STD_CALL_VAL(OPTEE_SMC_FUNCID_CALL_WITH_REGD_ARG) + +/* + * Get Shared Memory Config + * + * Returns the Secure/Non-secure shared memory config. + * + * Call register usage: + * a0 SMC Function ID, OPTEE_SMC_GET_SHM_CONFIG + * a1-6 Not used + * a7 Hypervisor Client ID register + * + * Have config return register usage: + * a0 OPTEE_SMC_RETURN_OK + * a1 Physical address of start of SHM + * a2 Size of SHM + * a3 Cache settings of memory, as defined by the + * OPTEE_SMC_SHM_* values above + * a4-7 Preserved + * + * Not available register usage: + * a0 OPTEE_SMC_RETURN_ENOTAVAIL + * a1-3 Not used + * a4-7 Preserved + */ +#define OPTEE_SMC_FUNCID_GET_SHM_CONFIG 7 +#define OPTEE_SMC_GET_SHM_CONFIG \ + OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_SHM_CONFIG) + +struct optee_smc_get_shm_config_result { + unsigned long status; + unsigned long start; + unsigned long size; + unsigned long settings; +}; + +/* + * Exchanges capabilities between normal world and secure world + * + * Call register usage: + * a0 SMC Function ID, OPTEE_SMC_EXCHANGE_CAPABILITIES + * a1 bitfield of normal world capabilities OPTEE_SMC_NSEC_CAP_* + * a2-6 Not used + * a7 Hypervisor Client ID register + * + * Normal return register usage: + * a0 OPTEE_SMC_RETURN_OK + * a1 bitfield of secure world capabilities OPTEE_SMC_SEC_CAP_* + * a2 The maximum secure world notification number + * a3 Bit[7:0]: Number of parameters needed for RPC to be supplied + * as the second MSG arg struct for + * OPTEE_SMC_CALL_WITH_ARG + * Bit[31:8]: Reserved (MBZ) + * a4-7 Preserved + * + * Error return register usage: + * a0 OPTEE_SMC_RETURN_ENOTAVAIL, can't use the capabilities from normal world + * a1 bitfield of secure world capabilities OPTEE_SMC_SEC_CAP_* + * a2-7 Preserved + */ +/* Normal world works as a uniprocessor system */ +#define OPTEE_SMC_NSEC_CAP_UNIPROCESSOR BIT(0) +/* Secure world has reserved shared memory for normal world to use */ +#define OPTEE_SMC_SEC_CAP_HAVE_RESERVED_SHM BIT(0) +/* Secure world can communicate via previously unregistered shared memory */ +#define OPTEE_SMC_SEC_CAP_UNREGISTERED_SHM BIT(1) + +/* + * Secure world supports commands "register/unregister shared memory", + * secure world accepts command buffers located in any parts of non-secure RAM + */ +#define OPTEE_SMC_SEC_CAP_DYNAMIC_SHM BIT(2) +/* Secure world is built with virtualization support */ +#define OPTEE_SMC_SEC_CAP_VIRTUALIZATION BIT(3) +/* Secure world supports Shared Memory with a NULL reference */ +#define OPTEE_SMC_SEC_CAP_MEMREF_NULL BIT(4) +/* Secure world supports asynchronous notification of normal world */ +#define OPTEE_SMC_SEC_CAP_ASYNC_NOTIF BIT(5) +/* Secure world supports pre-allocating RPC arg struct */ +#define OPTEE_SMC_SEC_CAP_RPC_ARG BIT(6) + +#define OPTEE_SMC_FUNCID_EXCHANGE_CAPABILITIES 9 +#define OPTEE_SMC_EXCHANGE_CAPABILITIES \ + OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_EXCHANGE_CAPABILITIES) + +struct optee_smc_exchange_capabilities_result { + unsigned long status; + unsigned long capabilities; + unsigned long max_notif_value; + unsigned long data; +}; + +/* + * Disable and empties cache of shared memory objects + * + * Secure world can cache frequently used shared memory objects, for + * example objects used as RPC arguments. When secure world is idle this + * function returns one shared memory reference to free. To disable the + * cache and free all cached objects this function has to be called until + * it returns OPTEE_SMC_RETURN_ENOTAVAIL. + * + * Call register usage: + * a0 SMC Function ID, OPTEE_SMC_DISABLE_SHM_CACHE + * a1-6 Not used + * a7 Hypervisor Client ID register + * + * Normal return register usage: + * a0 OPTEE_SMC_RETURN_OK + * a1 Upper 32 bits of a 64-bit Shared memory cookie + * a2 Lower 32 bits of a 64-bit Shared memory cookie + * a3-7 Preserved + * + * Cache empty return register usage: + * a0 OPTEE_SMC_RETURN_ENOTAVAIL + * a1-7 Preserved + * + * Not idle return register usage: + * a0 OPTEE_SMC_RETURN_EBUSY + * a1-7 Preserved + */ +#define OPTEE_SMC_FUNCID_DISABLE_SHM_CACHE 10 +#define OPTEE_SMC_DISABLE_SHM_CACHE \ + OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_DISABLE_SHM_CACHE) + +struct optee_smc_disable_shm_cache_result { + unsigned long status; + unsigned long shm_upper32; + unsigned long shm_lower32; + unsigned long reserved0; +}; + +/* + * Enable cache of shared memory objects + * + * Secure world can cache frequently used shared memory objects, for + * example objects used as RPC arguments. When secure world is idle this + * function returns OPTEE_SMC_RETURN_OK and the cache is enabled. If + * secure world isn't idle OPTEE_SMC_RETURN_EBUSY is returned. + * + * Call register usage: + * a0 SMC Function ID, OPTEE_SMC_ENABLE_SHM_CACHE + * a1-6 Not used + * a7 Hypervisor Client ID register + * + * Normal return register usage: + * a0 OPTEE_SMC_RETURN_OK + * a1-7 Preserved + * + * Not idle return register usage: + * a0 OPTEE_SMC_RETURN_EBUSY + * a1-7 Preserved + */ +#define OPTEE_SMC_FUNCID_ENABLE_SHM_CACHE 11 +#define OPTEE_SMC_ENABLE_SHM_CACHE \ + OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_ENABLE_SHM_CACHE) + +/* + * Query OP-TEE about number of supported threads + * + * Normal World OS or Hypervisor issues this call to find out how many + * threads OP-TEE supports. That is how many standard calls can be issued + * in parallel before OP-TEE will return OPTEE_SMC_RETURN_ETHREAD_LIMIT. + * + * Call requests usage: + * a0 SMC Function ID, OPTEE_SMC_GET_THREAD_COUNT + * a1-6 Not used + * a7 Hypervisor Client ID register + * + * Normal return register usage: + * a0 OPTEE_SMC_RETURN_OK + * a1 Number of threads + * a2-7 Preserved + * + * Error return: + * a0 OPTEE_SMC_RETURN_UNKNOWN_FUNCTION Requested call is not implemented + * a1-7 Preserved + */ +#define OPTEE_SMC_FUNCID_GET_THREAD_COUNT 15 +#define OPTEE_SMC_GET_THREAD_COUNT \ + OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_THREAD_COUNT) + +/* + * Inform OP-TEE that normal world is able to receive asynchronous + * notifications. + * + * Call requests usage: + * a0 SMC Function ID, OPTEE_SMC_ENABLE_ASYNC_NOTIF + * a1-6 Not used + * a7 Hypervisor Client ID register + * + * Normal return register usage: + * a0 OPTEE_SMC_RETURN_OK + * a1-7 Preserved + * + * Not supported return register usage: + * a0 OPTEE_SMC_RETURN_ENOTAVAIL + * a1-7 Preserved + */ +#define OPTEE_SMC_FUNCID_ENABLE_ASYNC_NOTIF 16 +#define OPTEE_SMC_ENABLE_ASYNC_NOTIF \ + OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_ENABLE_ASYNC_NOTIF) + +/* + * Retrieve a value of notifications pending since the last call of this + * function. + * + * OP-TEE keeps a record of all posted values. When an interrupt is + * received which indicates that there are posted values this function + * should be called until all pended values have been retrieved. When a + * value is retrieved, it's cleared from the record in secure world. + * + * It is expected that this function is called from an interrupt handler + * in normal world. + * + * Call requests usage: + * a0 SMC Function ID, OPTEE_SMC_GET_ASYNC_NOTIF_VALUE + * a1-6 Not used + * a7 Hypervisor Client ID register + * + * Normal return register usage: + * a0 OPTEE_SMC_RETURN_OK + * a1 value + * a2 Bit[0]: OPTEE_SMC_ASYNC_NOTIF_VALUE_VALID if the value in a1 is + * valid, else 0 if no values where pending + * a2 Bit[1]: OPTEE_SMC_ASYNC_NOTIF_VALUE_PENDING if another value is + * pending, else 0. + * Bit[31:2]: MBZ + * a3-7 Preserved + * + * Not supported return register usage: + * a0 OPTEE_SMC_RETURN_ENOTAVAIL + * a1-7 Preserved + */ +#define OPTEE_SMC_ASYNC_NOTIF_VALUE_VALID BIT(0) +#define OPTEE_SMC_ASYNC_NOTIF_VALUE_PENDING BIT(1) + +/* + * Notification that OP-TEE expects a yielding call to do some bottom half + * work in a driver. + */ +#define OPTEE_SMC_ASYNC_NOTIF_VALUE_DO_BOTTOM_HALF 0 + +#define OPTEE_SMC_FUNCID_GET_ASYNC_NOTIF_VALUE 17 +#define OPTEE_SMC_GET_ASYNC_NOTIF_VALUE \ + OPTEE_SMC_FAST_CALL_VAL(OPTEE_SMC_FUNCID_GET_ASYNC_NOTIF_VALUE) + +/* See OPTEE_SMC_CALL_WITH_RPC_ARG above */ +#define OPTEE_SMC_FUNCID_CALL_WITH_RPC_ARG 18 + +/* See OPTEE_SMC_CALL_WITH_REGD_ARG above */ +#define OPTEE_SMC_FUNCID_CALL_WITH_REGD_ARG 19 + +/* + * Resume from RPC (for example after processing a foreign interrupt) + * + * Call register usage: + * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC + * a1-3 Value of a1-3 when OPTEE_SMC_CALL_WITH_ARG returned + * OPTEE_SMC_RETURN_RPC in a0 + * + * Return register usage is the same as for OPTEE_SMC_*CALL_WITH_ARG above. + * + * Possible return values + * OPTEE_SMC_RETURN_UNKNOWN_FUNCTION Trusted OS does not recognize this + * function. + * OPTEE_SMC_RETURN_OK Original call completed, result + * updated in the previously supplied. + * struct optee_msg_arg + * OPTEE_SMC_RETURN_RPC Call suspended by RPC call to normal + * world. + * OPTEE_SMC_RETURN_ERESUME Resume failed, the opaque resume + * information was corrupt. + */ +#define OPTEE_SMC_FUNCID_RETURN_FROM_RPC 3 +#define OPTEE_SMC_CALL_RETURN_FROM_RPC \ + OPTEE_SMC_STD_CALL_VAL(OPTEE_SMC_FUNCID_RETURN_FROM_RPC) + +#define OPTEE_SMC_RETURN_RPC_PREFIX_MASK 0xFFFF0000 +#define OPTEE_SMC_RETURN_RPC_PREFIX 0xFFFF0000 +#define OPTEE_SMC_RETURN_RPC_FUNC_MASK 0x0000FFFF + +#define OPTEE_SMC_RETURN_GET_RPC_FUNC(ret) \ + ((ret) & OPTEE_SMC_RETURN_RPC_FUNC_MASK) + +#define OPTEE_SMC_RPC_VAL(func) ((func) | OPTEE_SMC_RETURN_RPC_PREFIX) + +/* + * Allocate memory for RPC parameter passing. The memory is used to hold a + * struct optee_msg_arg. + * + * "Call" register usage: + * a0 This value, OPTEE_SMC_RETURN_RPC_ALLOC + * a1 Size in bytes of required argument memory + * a2 Not used + * a3 Resume information, must be preserved + * a4-5 Not used + * a6-7 Resume information, must be preserved + * + * "Return" register usage: + * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC. + * a1 Upper 32 bits of 64-bit physical pointer to allocated + * memory, (a1 == 0 && a2 == 0) if size was 0 or if memory can't + * be allocated. + * a2 Lower 32 bits of 64-bit physical pointer to allocated + * memory, (a1 == 0 && a2 == 0) if size was 0 or if memory can't + * be allocated + * a3 Preserved + * a4 Upper 32 bits of 64-bit Shared memory cookie used when freeing + * the memory or doing an RPC + * a5 Lower 32 bits of 64-bit Shared memory cookie used when freeing + * the memory or doing an RPC + * a6-7 Preserved + */ +#define OPTEE_SMC_RPC_FUNC_ALLOC 0 +#define OPTEE_SMC_RETURN_RPC_ALLOC \ + OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_ALLOC) + +/* + * Free memory previously allocated by OPTEE_SMC_RETURN_RPC_ALLOC + * + * "Call" register usage: + * a0 This value, OPTEE_SMC_RETURN_RPC_FREE + * a1 Upper 32 bits of 64-bit shared memory cookie belonging to this + * argument memory + * a2 Lower 32 bits of 64-bit shared memory cookie belonging to this + * argument memory + * a3-7 Resume information, must be preserved + * + * "Return" register usage: + * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC. + * a1-2 Not used + * a3-7 Preserved + */ +#define OPTEE_SMC_RPC_FUNC_FREE 2 +#define OPTEE_SMC_RETURN_RPC_FREE \ + OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_FREE) + +/* + * Deliver a foreign interrupt in normal world. + * + * "Call" register usage: + * a0 OPTEE_SMC_RETURN_RPC_FOREIGN_INTR + * a1-7 Resume information, must be preserved + * + * "Return" register usage: + * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC. + * a1-7 Preserved + */ +#define OPTEE_SMC_RPC_FUNC_FOREIGN_INTR 4 +#define OPTEE_SMC_RETURN_RPC_FOREIGN_INTR \ + OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_FOREIGN_INTR) + +/* + * Do an RPC request. The supplied struct optee_msg_arg tells which + * request to do and the parameters for the request. The following fields + * are used (the rest are unused): + * - cmd the Request ID + * - ret return value of the request, filled in by normal world + * - num_params number of parameters for the request + * - params the parameters + * - param_attrs attributes of the parameters + * + * "Call" register usage: + * a0 OPTEE_SMC_RETURN_RPC_CMD + * a1 Upper 32 bits of a 64-bit Shared memory cookie holding a + * struct optee_msg_arg, must be preserved, only the data should + * be updated + * a2 Lower 32 bits of a 64-bit Shared memory cookie holding a + * struct optee_msg_arg, must be preserved, only the data should + * be updated + * a3-7 Resume information, must be preserved + * + * "Return" register usage: + * a0 SMC Function ID, OPTEE_SMC_CALL_RETURN_FROM_RPC. + * a1-2 Not used + * a3-7 Preserved + */ +#define OPTEE_SMC_RPC_FUNC_CMD 5 +#define OPTEE_SMC_RETURN_RPC_CMD \ + OPTEE_SMC_RPC_VAL(OPTEE_SMC_RPC_FUNC_CMD) + +/* Returned in a0 */ +#define OPTEE_SMC_RETURN_UNKNOWN_FUNCTION 0xFFFFFFFF + +/* Returned in a0 only from Trusted OS functions */ +#define OPTEE_SMC_RETURN_OK 0x0 +#define OPTEE_SMC_RETURN_ETHREAD_LIMIT 0x1 +#define OPTEE_SMC_RETURN_EBUSY 0x2 +#define OPTEE_SMC_RETURN_ERESUME 0x3 +#define OPTEE_SMC_RETURN_EBADADDR 0x4 +#define OPTEE_SMC_RETURN_EBADCMD 0x5 +#define OPTEE_SMC_RETURN_ENOMEM 0x6 +#define OPTEE_SMC_RETURN_ENOTAVAIL 0x7 +#define OPTEE_SMC_RETURN_IS_RPC(ret) __optee_smc_return_is_rpc((ret)) + +static inline bool __optee_smc_return_is_rpc(u32 ret) +{ + return ret != OPTEE_SMC_RETURN_UNKNOWN_FUNCTION && + (ret & OPTEE_SMC_RETURN_RPC_PREFIX_MASK) == + OPTEE_SMC_RETURN_RPC_PREFIX; +} + +#endif /* OPTEE_SMC_H */ -- cgit v1.2.3