From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/thermal/qcom/tsens-8960.c | 285 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 285 insertions(+) create mode 100644 drivers/thermal/qcom/tsens-8960.c (limited to 'drivers/thermal/qcom/tsens-8960.c') diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c new file mode 100644 index 000000000..4585904fb --- /dev/null +++ b/drivers/thermal/qcom/tsens-8960.c @@ -0,0 +1,285 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include "tsens.h" + +#define CONFIG_ADDR 0x3640 +#define CONFIG_ADDR_8660 0x3620 +/* CONFIG_ADDR bitmasks */ +#define CONFIG 0x9b +#define CONFIG_MASK 0xf +#define CONFIG_8660 1 +#define CONFIG_SHIFT_8660 28 +#define CONFIG_MASK_8660 (3 << CONFIG_SHIFT_8660) + +#define CNTL_ADDR 0x3620 +/* CNTL_ADDR bitmasks */ +#define EN BIT(0) +#define SW_RST BIT(1) + +#define MEASURE_PERIOD BIT(18) +#define SLP_CLK_ENA BIT(26) +#define SLP_CLK_ENA_8660 BIT(24) +#define SENSOR0_SHIFT 3 + +#define THRESHOLD_ADDR 0x3624 + +#define INT_STATUS_ADDR 0x363c + +#define S0_STATUS_OFF 0x3628 +#define S1_STATUS_OFF 0x362c +#define S2_STATUS_OFF 0x3630 +#define S3_STATUS_OFF 0x3634 +#define S4_STATUS_OFF 0x3638 +#define S5_STATUS_OFF 0x3664 /* Sensors 5-10 found on apq8064/msm8960 */ +#define S6_STATUS_OFF 0x3668 +#define S7_STATUS_OFF 0x366c +#define S8_STATUS_OFF 0x3670 +#define S9_STATUS_OFF 0x3674 +#define S10_STATUS_OFF 0x3678 + +/* Original slope - 350 to compensate mC to C inaccuracy */ +static u32 tsens_msm8960_slope[] = { + 826, 826, 804, 826, + 761, 782, 782, 849, + 782, 849, 782 + }; + +static int suspend_8960(struct tsens_priv *priv) +{ + int ret; + unsigned int mask; + struct regmap *map = priv->tm_map; + + ret = regmap_read(map, THRESHOLD_ADDR, &priv->ctx.threshold); + if (ret) + return ret; + + ret = regmap_read(map, CNTL_ADDR, &priv->ctx.control); + if (ret) + return ret; + + if (priv->num_sensors > 1) + mask = SLP_CLK_ENA | EN; + else + mask = SLP_CLK_ENA_8660 | EN; + + ret = regmap_update_bits(map, CNTL_ADDR, mask, 0); + if (ret) + return ret; + + return 0; +} + +static int resume_8960(struct tsens_priv *priv) +{ + int ret; + struct regmap *map = priv->tm_map; + + ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST); + if (ret) + return ret; + + /* + * Separate CONFIG restore is not needed only for 8660 as + * config is part of CTRL Addr and its restored as such + */ + if (priv->num_sensors > 1) { + ret = regmap_update_bits(map, CONFIG_ADDR, CONFIG_MASK, CONFIG); + if (ret) + return ret; + } + + ret = regmap_write(map, THRESHOLD_ADDR, priv->ctx.threshold); + if (ret) + return ret; + + ret = regmap_write(map, CNTL_ADDR, priv->ctx.control); + if (ret) + return ret; + + return 0; +} + +static int enable_8960(struct tsens_priv *priv, int id) +{ + int ret; + u32 reg, mask = BIT(id); + + ret = regmap_read(priv->tm_map, CNTL_ADDR, ®); + if (ret) + return ret; + + /* HARDWARE BUG: + * On platforms with more than 6 sensors, all remaining sensors + * must be enabled together, otherwise undefined results are expected. + * (Sensor 6-7 disabled, Sensor 3 disabled...) In the original driver, + * all the sensors are enabled in one step hence this bug is not + * triggered. + */ + if (id > 5) + mask = GENMASK(10, 6); + + mask <<= SENSOR0_SHIFT; + + /* Sensors already enabled. Skip. */ + if ((reg & mask) == mask) + return 0; + + ret = regmap_write(priv->tm_map, CNTL_ADDR, reg | SW_RST); + if (ret) + return ret; + + reg |= MEASURE_PERIOD; + + if (priv->num_sensors > 1) + reg |= mask | SLP_CLK_ENA | EN; + else + reg |= mask | SLP_CLK_ENA_8660 | EN; + + ret = regmap_write(priv->tm_map, CNTL_ADDR, reg); + if (ret) + return ret; + + return 0; +} + +static void disable_8960(struct tsens_priv *priv) +{ + int ret; + u32 reg_cntl; + u32 mask; + + mask = GENMASK(priv->num_sensors - 1, 0); + mask <<= SENSOR0_SHIFT; + mask |= EN; + + ret = regmap_read(priv->tm_map, CNTL_ADDR, ®_cntl); + if (ret) + return; + + reg_cntl &= ~mask; + + if (priv->num_sensors > 1) + reg_cntl &= ~SLP_CLK_ENA; + else + reg_cntl &= ~SLP_CLK_ENA_8660; + + regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl); +} + +static int calibrate_8960(struct tsens_priv *priv) +{ + int i; + char *data; + u32 p1[11]; + + data = qfprom_read(priv->dev, "calib"); + if (IS_ERR(data)) + data = qfprom_read(priv->dev, "calib_backup"); + if (IS_ERR(data)) + return PTR_ERR(data); + + for (i = 0; i < priv->num_sensors; i++) { + p1[i] = data[i]; + priv->sensor[i].slope = tsens_msm8960_slope[i]; + } + + compute_intercept_slope(priv, p1, NULL, ONE_PT_CALIB); + + kfree(data); + + return 0; +} + +static const struct reg_field tsens_8960_regfields[MAX_REGFIELDS] = { + /* ----- SROT ------ */ + /* No VERSION information */ + + /* CNTL */ + [TSENS_EN] = REG_FIELD(CNTL_ADDR, 0, 0), + [TSENS_SW_RST] = REG_FIELD(CNTL_ADDR, 1, 1), + /* 8960 has 5 sensors, 8660 has 11, we only handle 5 */ + [SENSOR_EN] = REG_FIELD(CNTL_ADDR, 3, 7), + + /* ----- TM ------ */ + /* INTERRUPT ENABLE */ + /* NO INTERRUPT ENABLE */ + + /* Single UPPER/LOWER TEMPERATURE THRESHOLD for all sensors */ + [LOW_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 0, 7), + [UP_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 8, 15), + /* MIN_THRESH_0 and MAX_THRESH_0 are not present in the regfield + * Recycle CRIT_THRESH_0 and 1 to set the required regs to hardcoded temp + * MIN_THRESH_0 -> CRIT_THRESH_1 + * MAX_THRESH_0 -> CRIT_THRESH_0 + */ + [CRIT_THRESH_1] = REG_FIELD(THRESHOLD_ADDR, 16, 23), + [CRIT_THRESH_0] = REG_FIELD(THRESHOLD_ADDR, 24, 31), + + /* UPPER/LOWER INTERRUPT [CLEAR/STATUS] */ + /* 1 == clear, 0 == normal operation */ + [LOW_INT_CLEAR_0] = REG_FIELD(CNTL_ADDR, 9, 9), + [UP_INT_CLEAR_0] = REG_FIELD(CNTL_ADDR, 10, 10), + + /* NO CRITICAL INTERRUPT SUPPORT on 8960 */ + + /* Sn_STATUS */ + [LAST_TEMP_0] = REG_FIELD(S0_STATUS_OFF, 0, 7), + [LAST_TEMP_1] = REG_FIELD(S1_STATUS_OFF, 0, 7), + [LAST_TEMP_2] = REG_FIELD(S2_STATUS_OFF, 0, 7), + [LAST_TEMP_3] = REG_FIELD(S3_STATUS_OFF, 0, 7), + [LAST_TEMP_4] = REG_FIELD(S4_STATUS_OFF, 0, 7), + [LAST_TEMP_5] = REG_FIELD(S5_STATUS_OFF, 0, 7), + [LAST_TEMP_6] = REG_FIELD(S6_STATUS_OFF, 0, 7), + [LAST_TEMP_7] = REG_FIELD(S7_STATUS_OFF, 0, 7), + [LAST_TEMP_8] = REG_FIELD(S8_STATUS_OFF, 0, 7), + [LAST_TEMP_9] = REG_FIELD(S9_STATUS_OFF, 0, 7), + [LAST_TEMP_10] = REG_FIELD(S10_STATUS_OFF, 0, 7), + + /* No VALID field on 8960 */ + /* TSENS_INT_STATUS bits: 1 == threshold violated */ + [MIN_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 0, 0), + [LOWER_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 1, 1), + [UPPER_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 2, 2), + /* No CRITICAL field on 8960 */ + [MAX_STATUS_0] = REG_FIELD(INT_STATUS_ADDR, 3, 3), + + /* TRDY: 1=ready, 0=in progress */ + [TRDY] = REG_FIELD(INT_STATUS_ADDR, 7, 7), +}; + +static const struct tsens_ops ops_8960 = { + .init = init_common, + .calibrate = calibrate_8960, + .get_temp = get_temp_common, + .enable = enable_8960, + .disable = disable_8960, + .suspend = suspend_8960, + .resume = resume_8960, +}; + +static struct tsens_features tsens_8960_feat = { + .ver_major = VER_0, + .crit_int = 0, + .combo_int = 0, + .adc = 1, + .srot_split = 0, + .max_sensors = 11, + .trip_min_temp = -40000, + .trip_max_temp = 120000, +}; + +struct tsens_plat_data data_8960 = { + .num_sensors = 11, + .ops = &ops_8960, + .feat = &tsens_8960_feat, + .fields = tsens_8960_regfields, +}; -- cgit v1.2.3