From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/thermal/tegra/soctherm-fuse.c | 160 ++++++++++++++++++++++++++++++++++ 1 file changed, 160 insertions(+) create mode 100644 drivers/thermal/tegra/soctherm-fuse.c (limited to 'drivers/thermal/tegra/soctherm-fuse.c') diff --git a/drivers/thermal/tegra/soctherm-fuse.c b/drivers/thermal/tegra/soctherm-fuse.c new file mode 100644 index 000000000..190f95280 --- /dev/null +++ b/drivers/thermal/tegra/soctherm-fuse.c @@ -0,0 +1,160 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2014-2016, NVIDIA CORPORATION. All rights reserved. + */ + +#include +#include +#include + +#include "soctherm.h" + +#define NOMINAL_CALIB_FT 105 +#define NOMINAL_CALIB_CP 25 + +#define FUSE_TSENSOR_CALIB_CP_TS_BASE_MASK 0x1fff +#define FUSE_TSENSOR_CALIB_FT_TS_BASE_MASK (0x1fff << 13) +#define FUSE_TSENSOR_CALIB_FT_TS_BASE_SHIFT 13 + +#define FUSE_TSENSOR_COMMON 0x180 + +/* + * Tegra210: Layout of bits in FUSE_TSENSOR_COMMON: + * 3 2 1 0 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * | BASE_FT | BASE_CP | SHFT_FT | SHIFT_CP | + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * + * Tegra12x, etc: + * In chips prior to Tegra210, this fuse was incorrectly sized as 26 bits, + * and didn't hold SHIFT_CP in [31:26]. Therefore these missing six bits + * were obtained via the FUSE_SPARE_REALIGNMENT_REG register [5:0]. + * + * FUSE_TSENSOR_COMMON: + * 3 2 1 0 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * |-----------| SHFT_FT | BASE_FT | BASE_CP | + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * + * FUSE_SPARE_REALIGNMENT_REG: + * 3 2 1 0 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * |---------------------------------------------------| SHIFT_CP | + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + */ + +#define CALIB_COEFFICIENT 1000000LL + +/** + * div64_s64_precise() - wrapper for div64_s64() + * @a: the dividend + * @b: the divisor + * + * Implements division with fairly accurate rounding instead of truncation by + * shifting the dividend to the left by 16 so that the quotient has a + * much higher precision. + * + * Return: the quotient of a / b. + */ +static s64 div64_s64_precise(s64 a, s32 b) +{ + s64 r, al; + + /* Scale up for increased precision division */ + al = a << 16; + + r = div64_s64(al * 2 + 1, 2 * b); + return r >> 16; +} + +int tegra_calc_shared_calib(const struct tegra_soctherm_fuse *tfuse, + struct tsensor_shared_calib *shared) +{ + u32 val; + s32 shifted_cp, shifted_ft; + int err; + + err = tegra_fuse_readl(FUSE_TSENSOR_COMMON, &val); + if (err) + return err; + + shared->base_cp = (val & tfuse->fuse_base_cp_mask) >> + tfuse->fuse_base_cp_shift; + shared->base_ft = (val & tfuse->fuse_base_ft_mask) >> + tfuse->fuse_base_ft_shift; + + shifted_ft = (val & tfuse->fuse_shift_ft_mask) >> + tfuse->fuse_shift_ft_shift; + shifted_ft = sign_extend32(shifted_ft, 4); + + if (tfuse->fuse_spare_realignment) { + err = tegra_fuse_readl(tfuse->fuse_spare_realignment, &val); + if (err) + return err; + } + + shifted_cp = sign_extend32(val, 5); + + shared->actual_temp_cp = 2 * NOMINAL_CALIB_CP + shifted_cp; + shared->actual_temp_ft = 2 * NOMINAL_CALIB_FT + shifted_ft; + + return 0; +} + +int tegra_calc_tsensor_calib(const struct tegra_tsensor *sensor, + const struct tsensor_shared_calib *shared, + u32 *calibration) +{ + const struct tegra_tsensor_group *sensor_group; + u32 val, calib; + s32 actual_tsensor_ft, actual_tsensor_cp; + s32 delta_sens, delta_temp; + s32 mult, div; + s16 therma, thermb; + s64 temp; + int err; + + sensor_group = sensor->group; + + err = tegra_fuse_readl(sensor->calib_fuse_offset, &val); + if (err) + return err; + + actual_tsensor_cp = (shared->base_cp * 64) + sign_extend32(val, 12); + val = (val & FUSE_TSENSOR_CALIB_FT_TS_BASE_MASK) >> + FUSE_TSENSOR_CALIB_FT_TS_BASE_SHIFT; + actual_tsensor_ft = (shared->base_ft * 32) + sign_extend32(val, 12); + + delta_sens = actual_tsensor_ft - actual_tsensor_cp; + delta_temp = shared->actual_temp_ft - shared->actual_temp_cp; + + mult = sensor_group->pdiv * sensor->config->tsample_ate; + div = sensor->config->tsample * sensor_group->pdiv_ate; + + temp = (s64)delta_temp * (1LL << 13) * mult; + therma = div64_s64_precise(temp, (s64)delta_sens * div); + + temp = ((s64)actual_tsensor_ft * shared->actual_temp_cp) - + ((s64)actual_tsensor_cp * shared->actual_temp_ft); + thermb = div64_s64_precise(temp, delta_sens); + + temp = (s64)therma * sensor->fuse_corr_alpha; + therma = div64_s64_precise(temp, CALIB_COEFFICIENT); + + temp = (s64)thermb * sensor->fuse_corr_alpha + sensor->fuse_corr_beta; + thermb = div64_s64_precise(temp, CALIB_COEFFICIENT); + + calib = ((u16)therma << SENSOR_CONFIG2_THERMA_SHIFT) | + ((u16)thermb << SENSOR_CONFIG2_THERMB_SHIFT); + + *calibration = calib; + + return 0; +} + +MODULE_AUTHOR("Wei Ni "); +MODULE_DESCRIPTION("Tegra SOCTHERM fuse management"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3