From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/thunderbolt/retimer.c | 512 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 512 insertions(+) create mode 100644 drivers/thunderbolt/retimer.c (limited to 'drivers/thunderbolt/retimer.c') diff --git a/drivers/thunderbolt/retimer.c b/drivers/thunderbolt/retimer.c new file mode 100644 index 000000000..56008eb91 --- /dev/null +++ b/drivers/thunderbolt/retimer.c @@ -0,0 +1,512 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Thunderbolt/USB4 retimer support. + * + * Copyright (C) 2020, Intel Corporation + * Authors: Kranthi Kuntala + * Mika Westerberg + */ + +#include +#include +#include + +#include "sb_regs.h" +#include "tb.h" + +#define TB_MAX_RETIMER_INDEX 6 + +/** + * tb_retimer_nvm_read() - Read contents of retimer NVM + * @rt: Retimer device + * @address: NVM address (in bytes) to start reading + * @buf: Data read from NVM is stored here + * @size: Number of bytes to read + * + * Reads retimer NVM and copies the contents to @buf. Returns %0 if the + * read was successful and negative errno in case of failure. + */ +int tb_retimer_nvm_read(struct tb_retimer *rt, unsigned int address, void *buf, + size_t size) +{ + return usb4_port_retimer_nvm_read(rt->port, rt->index, address, buf, size); +} + +static int nvm_read(void *priv, unsigned int offset, void *val, size_t bytes) +{ + struct tb_nvm *nvm = priv; + struct tb_retimer *rt = tb_to_retimer(nvm->dev); + int ret; + + pm_runtime_get_sync(&rt->dev); + + if (!mutex_trylock(&rt->tb->lock)) { + ret = restart_syscall(); + goto out; + } + + ret = tb_retimer_nvm_read(rt, offset, val, bytes); + mutex_unlock(&rt->tb->lock); + +out: + pm_runtime_mark_last_busy(&rt->dev); + pm_runtime_put_autosuspend(&rt->dev); + + return ret; +} + +static int nvm_write(void *priv, unsigned int offset, void *val, size_t bytes) +{ + struct tb_nvm *nvm = priv; + struct tb_retimer *rt = tb_to_retimer(nvm->dev); + int ret = 0; + + if (!mutex_trylock(&rt->tb->lock)) + return restart_syscall(); + + ret = tb_nvm_write_buf(nvm, offset, val, bytes); + mutex_unlock(&rt->tb->lock); + + return ret; +} + +static int tb_retimer_nvm_add(struct tb_retimer *rt) +{ + struct tb_nvm *nvm; + int ret; + + nvm = tb_nvm_alloc(&rt->dev); + if (IS_ERR(nvm)) { + ret = PTR_ERR(nvm) == -EOPNOTSUPP ? 0 : PTR_ERR(nvm); + goto err_nvm; + } + + ret = tb_nvm_read_version(nvm); + if (ret) + goto err_nvm; + + ret = tb_nvm_add_active(nvm, nvm_read); + if (ret) + goto err_nvm; + + ret = tb_nvm_add_non_active(nvm, nvm_write); + if (ret) + goto err_nvm; + + rt->nvm = nvm; + return 0; + +err_nvm: + dev_dbg(&rt->dev, "NVM upgrade disabled\n"); + if (!IS_ERR(nvm)) + tb_nvm_free(nvm); + + return ret; +} + +static int tb_retimer_nvm_validate_and_write(struct tb_retimer *rt) +{ + unsigned int image_size; + const u8 *buf; + int ret; + + ret = tb_nvm_validate(rt->nvm); + if (ret) + return ret; + + buf = rt->nvm->buf_data_start; + image_size = rt->nvm->buf_data_size; + + ret = usb4_port_retimer_nvm_write(rt->port, rt->index, 0, buf, + image_size); + if (ret) + return ret; + + rt->nvm->flushed = true; + return 0; +} + +static int tb_retimer_nvm_authenticate(struct tb_retimer *rt, bool auth_only) +{ + u32 status; + int ret; + + if (auth_only) { + ret = usb4_port_retimer_nvm_set_offset(rt->port, rt->index, 0); + if (ret) + return ret; + } + + ret = usb4_port_retimer_nvm_authenticate(rt->port, rt->index); + if (ret) + return ret; + + usleep_range(100, 150); + + /* + * Check the status now if we still can access the retimer. It + * is expected that the below fails. + */ + ret = usb4_port_retimer_nvm_authenticate_status(rt->port, rt->index, + &status); + if (!ret) { + rt->auth_status = status; + return status ? -EINVAL : 0; + } + + return 0; +} + +static ssize_t device_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct tb_retimer *rt = tb_to_retimer(dev); + + return sysfs_emit(buf, "%#x\n", rt->device); +} +static DEVICE_ATTR_RO(device); + +static ssize_t nvm_authenticate_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct tb_retimer *rt = tb_to_retimer(dev); + int ret; + + if (!mutex_trylock(&rt->tb->lock)) + return restart_syscall(); + + if (!rt->nvm) + ret = -EAGAIN; + else if (rt->no_nvm_upgrade) + ret = -EOPNOTSUPP; + else + ret = sysfs_emit(buf, "%#x\n", rt->auth_status); + + mutex_unlock(&rt->tb->lock); + + return ret; +} + +static ssize_t nvm_authenticate_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + struct tb_retimer *rt = tb_to_retimer(dev); + int val, ret; + + pm_runtime_get_sync(&rt->dev); + + if (!mutex_trylock(&rt->tb->lock)) { + ret = restart_syscall(); + goto exit_rpm; + } + + if (!rt->nvm) { + ret = -EAGAIN; + goto exit_unlock; + } + + ret = kstrtoint(buf, 10, &val); + if (ret) + goto exit_unlock; + + /* Always clear status */ + rt->auth_status = 0; + + if (val) { + if (val == AUTHENTICATE_ONLY) { + ret = tb_retimer_nvm_authenticate(rt, true); + } else { + if (!rt->nvm->flushed) { + if (!rt->nvm->buf) { + ret = -EINVAL; + goto exit_unlock; + } + + ret = tb_retimer_nvm_validate_and_write(rt); + if (ret || val == WRITE_ONLY) + goto exit_unlock; + } + if (val == WRITE_AND_AUTHENTICATE) + ret = tb_retimer_nvm_authenticate(rt, false); + } + } + +exit_unlock: + mutex_unlock(&rt->tb->lock); +exit_rpm: + pm_runtime_mark_last_busy(&rt->dev); + pm_runtime_put_autosuspend(&rt->dev); + + if (ret) + return ret; + return count; +} +static DEVICE_ATTR_RW(nvm_authenticate); + +static ssize_t nvm_version_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct tb_retimer *rt = tb_to_retimer(dev); + int ret; + + if (!mutex_trylock(&rt->tb->lock)) + return restart_syscall(); + + if (!rt->nvm) + ret = -EAGAIN; + else + ret = sysfs_emit(buf, "%x.%x\n", rt->nvm->major, rt->nvm->minor); + + mutex_unlock(&rt->tb->lock); + return ret; +} +static DEVICE_ATTR_RO(nvm_version); + +static ssize_t vendor_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct tb_retimer *rt = tb_to_retimer(dev); + + return sysfs_emit(buf, "%#x\n", rt->vendor); +} +static DEVICE_ATTR_RO(vendor); + +static struct attribute *retimer_attrs[] = { + &dev_attr_device.attr, + &dev_attr_nvm_authenticate.attr, + &dev_attr_nvm_version.attr, + &dev_attr_vendor.attr, + NULL +}; + +static const struct attribute_group retimer_group = { + .attrs = retimer_attrs, +}; + +static const struct attribute_group *retimer_groups[] = { + &retimer_group, + NULL +}; + +static void tb_retimer_release(struct device *dev) +{ + struct tb_retimer *rt = tb_to_retimer(dev); + + kfree(rt); +} + +struct device_type tb_retimer_type = { + .name = "thunderbolt_retimer", + .groups = retimer_groups, + .release = tb_retimer_release, +}; + +static int tb_retimer_add(struct tb_port *port, u8 index, u32 auth_status) +{ + struct tb_retimer *rt; + u32 vendor, device; + int ret; + + ret = usb4_port_retimer_read(port, index, USB4_SB_VENDOR_ID, &vendor, + sizeof(vendor)); + if (ret) { + if (ret != -ENODEV) + tb_port_warn(port, "failed read retimer VendorId: %d\n", ret); + return ret; + } + + ret = usb4_port_retimer_read(port, index, USB4_SB_PRODUCT_ID, &device, + sizeof(device)); + if (ret) { + if (ret != -ENODEV) + tb_port_warn(port, "failed read retimer ProductId: %d\n", ret); + return ret; + } + + if (vendor != PCI_VENDOR_ID_INTEL && vendor != 0x8087) { + tb_port_info(port, "retimer NVM format of vendor %#x is not supported\n", + vendor); + return -EOPNOTSUPP; + } + + /* + * Check that it supports NVM operations. If not then don't add + * the device at all. + */ + ret = usb4_port_retimer_nvm_sector_size(port, index); + if (ret < 0) + return ret; + + rt = kzalloc(sizeof(*rt), GFP_KERNEL); + if (!rt) + return -ENOMEM; + + rt->index = index; + rt->vendor = vendor; + rt->device = device; + rt->auth_status = auth_status; + rt->port = port; + rt->tb = port->sw->tb; + + rt->dev.parent = &port->usb4->dev; + rt->dev.bus = &tb_bus_type; + rt->dev.type = &tb_retimer_type; + dev_set_name(&rt->dev, "%s:%u.%u", dev_name(&port->sw->dev), + port->port, index); + + ret = device_register(&rt->dev); + if (ret) { + dev_err(&rt->dev, "failed to register retimer: %d\n", ret); + put_device(&rt->dev); + return ret; + } + + ret = tb_retimer_nvm_add(rt); + if (ret) { + dev_err(&rt->dev, "failed to add NVM devices: %d\n", ret); + device_unregister(&rt->dev); + return ret; + } + + dev_info(&rt->dev, "new retimer found, vendor=%#x device=%#x\n", + rt->vendor, rt->device); + + pm_runtime_no_callbacks(&rt->dev); + pm_runtime_set_active(&rt->dev); + pm_runtime_enable(&rt->dev); + pm_runtime_set_autosuspend_delay(&rt->dev, TB_AUTOSUSPEND_DELAY); + pm_runtime_mark_last_busy(&rt->dev); + pm_runtime_use_autosuspend(&rt->dev); + + return 0; +} + +static void tb_retimer_remove(struct tb_retimer *rt) +{ + dev_info(&rt->dev, "retimer disconnected\n"); + tb_nvm_free(rt->nvm); + device_unregister(&rt->dev); +} + +struct tb_retimer_lookup { + const struct tb_port *port; + u8 index; +}; + +static int retimer_match(struct device *dev, void *data) +{ + const struct tb_retimer_lookup *lookup = data; + struct tb_retimer *rt = tb_to_retimer(dev); + + return rt && rt->port == lookup->port && rt->index == lookup->index; +} + +static struct tb_retimer *tb_port_find_retimer(struct tb_port *port, u8 index) +{ + struct tb_retimer_lookup lookup = { .port = port, .index = index }; + struct device *dev; + + dev = device_find_child(&port->usb4->dev, &lookup, retimer_match); + if (dev) + return tb_to_retimer(dev); + + return NULL; +} + +/** + * tb_retimer_scan() - Scan for on-board retimers under port + * @port: USB4 port to scan + * @add: If true also registers found retimers + * + * Brings the sideband into a state where retimers can be accessed. + * Then Tries to enumerate on-board retimers connected to @port. Found + * retimers are registered as children of @port if @add is set. Does + * not scan for cable retimers for now. + */ +int tb_retimer_scan(struct tb_port *port, bool add) +{ + u32 status[TB_MAX_RETIMER_INDEX + 1] = {}; + int ret, i, last_idx = 0; + + /* + * Send broadcast RT to make sure retimer indices facing this + * port are set. + */ + ret = usb4_port_enumerate_retimers(port); + if (ret) + return ret; + + /* + * Enable sideband channel for each retimer. We can do this + * regardless whether there is device connected or not. + */ + for (i = 1; i <= TB_MAX_RETIMER_INDEX; i++) + usb4_port_retimer_set_inbound_sbtx(port, i); + + /* + * Before doing anything else, read the authentication status. + * If the retimer has it set, store it for the new retimer + * device instance. + */ + for (i = 1; i <= TB_MAX_RETIMER_INDEX; i++) + usb4_port_retimer_nvm_authenticate_status(port, i, &status[i]); + + for (i = 1; i <= TB_MAX_RETIMER_INDEX; i++) { + /* + * Last retimer is true only for the last on-board + * retimer (the one connected directly to the Type-C + * port). + */ + ret = usb4_port_retimer_is_last(port, i); + if (ret > 0) + last_idx = i; + else if (ret < 0) + break; + } + + if (!last_idx) + return 0; + + /* Add on-board retimers if they do not exist already */ + ret = 0; + for (i = 1; i <= last_idx; i++) { + struct tb_retimer *rt; + + rt = tb_port_find_retimer(port, i); + if (rt) { + put_device(&rt->dev); + } else if (add) { + ret = tb_retimer_add(port, i, status[i]); + if (ret && ret != -EOPNOTSUPP) + break; + } + } + + return ret; +} + +static int remove_retimer(struct device *dev, void *data) +{ + struct tb_retimer *rt = tb_to_retimer(dev); + struct tb_port *port = data; + + if (rt && rt->port == port) + tb_retimer_remove(rt); + return 0; +} + +/** + * tb_retimer_remove_all() - Remove all retimers under port + * @port: USB4 port whose retimers to remove + * + * This removes all previously added retimers under @port. + */ +void tb_retimer_remove_all(struct tb_port *port) +{ + struct usb4_port *usb4; + + usb4 = port->usb4; + if (usb4) + device_for_each_child_reverse(&usb4->dev, port, + remove_retimer); +} -- cgit v1.2.3