From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/tty/serial/8250/8250_dma.c | 301 +++++++++++++++++++++++++++++++++++++ 1 file changed, 301 insertions(+) create mode 100644 drivers/tty/serial/8250/8250_dma.c (limited to 'drivers/tty/serial/8250/8250_dma.c') diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c new file mode 100644 index 000000000..7fa665017 --- /dev/null +++ b/drivers/tty/serial/8250/8250_dma.c @@ -0,0 +1,301 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * 8250_dma.c - DMA Engine API support for 8250.c + * + * Copyright (C) 2013 Intel Corporation + */ +#include +#include +#include +#include + +#include "8250.h" + +static void __dma_tx_complete(void *param) +{ + struct uart_8250_port *p = param; + struct uart_8250_dma *dma = p->dma; + struct circ_buf *xmit = &p->port.state->xmit; + unsigned long flags; + int ret; + + dma_sync_single_for_cpu(dma->txchan->device->dev, dma->tx_addr, + UART_XMIT_SIZE, DMA_TO_DEVICE); + + spin_lock_irqsave(&p->port.lock, flags); + + dma->tx_running = 0; + + uart_xmit_advance(&p->port, dma->tx_size); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&p->port); + + ret = serial8250_tx_dma(p); + if (ret || !dma->tx_running) + serial8250_set_THRI(p); + + spin_unlock_irqrestore(&p->port.lock, flags); +} + +static void __dma_rx_complete(struct uart_8250_port *p) +{ + struct uart_8250_dma *dma = p->dma; + struct tty_port *tty_port = &p->port.state->port; + struct dma_tx_state state; + enum dma_status dma_status; + int count; + + /* + * New DMA Rx can be started during the completion handler before it + * could acquire port's lock and it might still be ongoing. Don't to + * anything in such case. + */ + dma_status = dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state); + if (dma_status == DMA_IN_PROGRESS) + return; + + count = dma->rx_size - state.residue; + + tty_insert_flip_string(tty_port, dma->rx_buf, count); + p->port.icount.rx += count; + dma->rx_running = 0; + + tty_flip_buffer_push(tty_port); +} + +static void dma_rx_complete(void *param) +{ + struct uart_8250_port *p = param; + struct uart_8250_dma *dma = p->dma; + unsigned long flags; + + spin_lock_irqsave(&p->port.lock, flags); + if (dma->rx_running) + __dma_rx_complete(p); + + /* + * Cannot be combined with the previous check because __dma_rx_complete() + * changes dma->rx_running. + */ + if (!dma->rx_running && (serial_lsr_in(p) & UART_LSR_DR)) + p->dma->rx_dma(p); + spin_unlock_irqrestore(&p->port.lock, flags); +} + +int serial8250_tx_dma(struct uart_8250_port *p) +{ + struct uart_8250_dma *dma = p->dma; + struct circ_buf *xmit = &p->port.state->xmit; + struct dma_async_tx_descriptor *desc; + struct uart_port *up = &p->port; + int ret; + + if (dma->tx_running) { + if (up->x_char) { + dmaengine_pause(dma->txchan); + uart_xchar_out(up, UART_TX); + dmaengine_resume(dma->txchan); + } + return 0; + } else if (up->x_char) { + uart_xchar_out(up, UART_TX); + } + + if (uart_tx_stopped(&p->port) || uart_circ_empty(xmit)) { + /* We have been called from __dma_tx_complete() */ + return 0; + } + + dma->tx_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); + + serial8250_do_prepare_tx_dma(p); + + desc = dmaengine_prep_slave_single(dma->txchan, + dma->tx_addr + xmit->tail, + dma->tx_size, DMA_MEM_TO_DEV, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) { + ret = -EBUSY; + goto err; + } + + dma->tx_running = 1; + desc->callback = __dma_tx_complete; + desc->callback_param = p; + + dma->tx_cookie = dmaengine_submit(desc); + + dma_sync_single_for_device(dma->txchan->device->dev, dma->tx_addr, + UART_XMIT_SIZE, DMA_TO_DEVICE); + + dma_async_issue_pending(dma->txchan); + serial8250_clear_THRI(p); + dma->tx_err = 0; + + return 0; +err: + dma->tx_err = 1; + return ret; +} + +int serial8250_rx_dma(struct uart_8250_port *p) +{ + struct uart_8250_dma *dma = p->dma; + struct dma_async_tx_descriptor *desc; + + if (dma->rx_running) + return 0; + + serial8250_do_prepare_rx_dma(p); + + desc = dmaengine_prep_slave_single(dma->rxchan, dma->rx_addr, + dma->rx_size, DMA_DEV_TO_MEM, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) + return -EBUSY; + + dma->rx_running = 1; + desc->callback = dma_rx_complete; + desc->callback_param = p; + + dma->rx_cookie = dmaengine_submit(desc); + + dma_async_issue_pending(dma->rxchan); + + return 0; +} + +void serial8250_rx_dma_flush(struct uart_8250_port *p) +{ + struct uart_8250_dma *dma = p->dma; + + if (dma->rx_running) { + dmaengine_pause(dma->rxchan); + __dma_rx_complete(p); + dmaengine_terminate_async(dma->rxchan); + } +} +EXPORT_SYMBOL_GPL(serial8250_rx_dma_flush); + +int serial8250_request_dma(struct uart_8250_port *p) +{ + struct uart_8250_dma *dma = p->dma; + phys_addr_t rx_dma_addr = dma->rx_dma_addr ? + dma->rx_dma_addr : p->port.mapbase; + phys_addr_t tx_dma_addr = dma->tx_dma_addr ? + dma->tx_dma_addr : p->port.mapbase; + dma_cap_mask_t mask; + struct dma_slave_caps caps; + int ret; + + /* Default slave configuration parameters */ + dma->rxconf.direction = DMA_DEV_TO_MEM; + dma->rxconf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + dma->rxconf.src_addr = rx_dma_addr + UART_RX; + + dma->txconf.direction = DMA_MEM_TO_DEV; + dma->txconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + dma->txconf.dst_addr = tx_dma_addr + UART_TX; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + /* Get a channel for RX */ + dma->rxchan = dma_request_slave_channel_compat(mask, + dma->fn, dma->rx_param, + p->port.dev, "rx"); + if (!dma->rxchan) + return -ENODEV; + + /* 8250 rx dma requires dmaengine driver to support pause/terminate */ + ret = dma_get_slave_caps(dma->rxchan, &caps); + if (ret) + goto release_rx; + if (!caps.cmd_pause || !caps.cmd_terminate || + caps.residue_granularity == DMA_RESIDUE_GRANULARITY_DESCRIPTOR) { + ret = -EINVAL; + goto release_rx; + } + + dmaengine_slave_config(dma->rxchan, &dma->rxconf); + + /* Get a channel for TX */ + dma->txchan = dma_request_slave_channel_compat(mask, + dma->fn, dma->tx_param, + p->port.dev, "tx"); + if (!dma->txchan) { + ret = -ENODEV; + goto release_rx; + } + + /* 8250 tx dma requires dmaengine driver to support terminate */ + ret = dma_get_slave_caps(dma->txchan, &caps); + if (ret) + goto err; + if (!caps.cmd_terminate) { + ret = -EINVAL; + goto err; + } + + dmaengine_slave_config(dma->txchan, &dma->txconf); + + /* RX buffer */ + if (!dma->rx_size) + dma->rx_size = PAGE_SIZE; + + dma->rx_buf = dma_alloc_coherent(dma->rxchan->device->dev, dma->rx_size, + &dma->rx_addr, GFP_KERNEL); + if (!dma->rx_buf) { + ret = -ENOMEM; + goto err; + } + + /* TX buffer */ + dma->tx_addr = dma_map_single(dma->txchan->device->dev, + p->port.state->xmit.buf, + UART_XMIT_SIZE, + DMA_TO_DEVICE); + if (dma_mapping_error(dma->txchan->device->dev, dma->tx_addr)) { + dma_free_coherent(dma->rxchan->device->dev, dma->rx_size, + dma->rx_buf, dma->rx_addr); + ret = -ENOMEM; + goto err; + } + + dev_dbg_ratelimited(p->port.dev, "got both dma channels\n"); + + return 0; +err: + dma_release_channel(dma->txchan); +release_rx: + dma_release_channel(dma->rxchan); + return ret; +} +EXPORT_SYMBOL_GPL(serial8250_request_dma); + +void serial8250_release_dma(struct uart_8250_port *p) +{ + struct uart_8250_dma *dma = p->dma; + + if (!dma) + return; + + /* Release RX resources */ + dmaengine_terminate_sync(dma->rxchan); + dma_free_coherent(dma->rxchan->device->dev, dma->rx_size, dma->rx_buf, + dma->rx_addr); + dma_release_channel(dma->rxchan); + dma->rxchan = NULL; + + /* Release TX resources */ + dmaengine_terminate_sync(dma->txchan); + dma_unmap_single(dma->txchan->device->dev, dma->tx_addr, + UART_XMIT_SIZE, DMA_TO_DEVICE); + dma_release_channel(dma->txchan); + dma->txchan = NULL; + dma->tx_running = 0; + + dev_dbg_ratelimited(p->port.dev, "dma channels released\n"); +} +EXPORT_SYMBOL_GPL(serial8250_release_dma); -- cgit v1.2.3