From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/tty/serial/serial_mctrl_gpio.c | 388 +++++++++++++++++++++++++++++++++ 1 file changed, 388 insertions(+) create mode 100644 drivers/tty/serial/serial_mctrl_gpio.c (limited to 'drivers/tty/serial/serial_mctrl_gpio.c') diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c new file mode 100644 index 000000000..7d5aaa8d4 --- /dev/null +++ b/drivers/tty/serial/serial_mctrl_gpio.c @@ -0,0 +1,388 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Helpers for controlling modem lines via GPIO + * + * Copyright (C) 2014 Paratronic S.A. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "serial_mctrl_gpio.h" + +struct mctrl_gpios { + struct uart_port *port; + struct gpio_desc *gpio[UART_GPIO_MAX]; + int irq[UART_GPIO_MAX]; + unsigned int mctrl_prev; + bool mctrl_on; +}; + +static const struct { + const char *name; + unsigned int mctrl; + enum gpiod_flags flags; +} mctrl_gpios_desc[UART_GPIO_MAX] = { + { "cts", TIOCM_CTS, GPIOD_IN, }, + { "dsr", TIOCM_DSR, GPIOD_IN, }, + { "dcd", TIOCM_CD, GPIOD_IN, }, + { "rng", TIOCM_RNG, GPIOD_IN, }, + { "rts", TIOCM_RTS, GPIOD_OUT_LOW, }, + { "dtr", TIOCM_DTR, GPIOD_OUT_LOW, }, +}; + +static bool mctrl_gpio_flags_is_dir_out(unsigned int idx) +{ + return mctrl_gpios_desc[idx].flags & GPIOD_FLAGS_BIT_DIR_OUT; +} + +/** + * mctrl_gpio_set - set gpios according to mctrl state + * @gpios: gpios to set + * @mctrl: state to set + * + * Set the gpios according to the mctrl state. + */ +void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl) +{ + enum mctrl_gpio_idx i; + struct gpio_desc *desc_array[UART_GPIO_MAX]; + DECLARE_BITMAP(values, UART_GPIO_MAX); + unsigned int count = 0; + + if (gpios == NULL) + return; + + for (i = 0; i < UART_GPIO_MAX; i++) + if (gpios->gpio[i] && mctrl_gpio_flags_is_dir_out(i)) { + desc_array[count] = gpios->gpio[i]; + __assign_bit(count, values, + mctrl & mctrl_gpios_desc[i].mctrl); + count++; + } + gpiod_set_array_value(count, desc_array, NULL, values); +} +EXPORT_SYMBOL_GPL(mctrl_gpio_set); + +/** + * mctrl_gpio_to_gpiod - obtain gpio_desc of modem line index + * @gpios: gpios to look into + * @gidx: index of the modem line + * Returns: the gpio_desc structure associated to the modem line index + */ +struct gpio_desc *mctrl_gpio_to_gpiod(struct mctrl_gpios *gpios, + enum mctrl_gpio_idx gidx) +{ + if (gpios == NULL) + return NULL; + + return gpios->gpio[gidx]; +} +EXPORT_SYMBOL_GPL(mctrl_gpio_to_gpiod); + +/** + * mctrl_gpio_get - update mctrl with the gpios values. + * @gpios: gpios to get the info from + * @mctrl: mctrl to set + * Returns: modified mctrl (the same value as in @mctrl) + * + * Update mctrl with the gpios values. + */ +unsigned int mctrl_gpio_get(struct mctrl_gpios *gpios, unsigned int *mctrl) +{ + enum mctrl_gpio_idx i; + + if (gpios == NULL) + return *mctrl; + + for (i = 0; i < UART_GPIO_MAX; i++) { + if (gpios->gpio[i] && !mctrl_gpio_flags_is_dir_out(i)) { + if (gpiod_get_value(gpios->gpio[i])) + *mctrl |= mctrl_gpios_desc[i].mctrl; + else + *mctrl &= ~mctrl_gpios_desc[i].mctrl; + } + } + + return *mctrl; +} +EXPORT_SYMBOL_GPL(mctrl_gpio_get); + +unsigned int +mctrl_gpio_get_outputs(struct mctrl_gpios *gpios, unsigned int *mctrl) +{ + enum mctrl_gpio_idx i; + + if (gpios == NULL) + return *mctrl; + + for (i = 0; i < UART_GPIO_MAX; i++) { + if (gpios->gpio[i] && mctrl_gpio_flags_is_dir_out(i)) { + if (gpiod_get_value(gpios->gpio[i])) + *mctrl |= mctrl_gpios_desc[i].mctrl; + else + *mctrl &= ~mctrl_gpios_desc[i].mctrl; + } + } + + return *mctrl; +} +EXPORT_SYMBOL_GPL(mctrl_gpio_get_outputs); + +struct mctrl_gpios *mctrl_gpio_init_noauto(struct device *dev, unsigned int idx) +{ + struct mctrl_gpios *gpios; + enum mctrl_gpio_idx i; + + gpios = devm_kzalloc(dev, sizeof(*gpios), GFP_KERNEL); + if (!gpios) + return ERR_PTR(-ENOMEM); + + for (i = 0; i < UART_GPIO_MAX; i++) { + char *gpio_str; + bool present; + + /* Check if GPIO property exists and continue if not */ + gpio_str = kasprintf(GFP_KERNEL, "%s-gpios", + mctrl_gpios_desc[i].name); + if (!gpio_str) + continue; + + present = device_property_present(dev, gpio_str); + kfree(gpio_str); + if (!present) + continue; + + gpios->gpio[i] = + devm_gpiod_get_index_optional(dev, + mctrl_gpios_desc[i].name, + idx, + mctrl_gpios_desc[i].flags); + + if (IS_ERR(gpios->gpio[i])) + return ERR_CAST(gpios->gpio[i]); + } + + return gpios; +} +EXPORT_SYMBOL_GPL(mctrl_gpio_init_noauto); + +#define MCTRL_ANY_DELTA (TIOCM_RI | TIOCM_DSR | TIOCM_CD | TIOCM_CTS) +static irqreturn_t mctrl_gpio_irq_handle(int irq, void *context) +{ + struct mctrl_gpios *gpios = context; + struct uart_port *port = gpios->port; + u32 mctrl = gpios->mctrl_prev; + u32 mctrl_diff; + unsigned long flags; + + mctrl_gpio_get(gpios, &mctrl); + + spin_lock_irqsave(&port->lock, flags); + + mctrl_diff = mctrl ^ gpios->mctrl_prev; + gpios->mctrl_prev = mctrl; + + if (mctrl_diff & MCTRL_ANY_DELTA && port->state != NULL) { + if ((mctrl_diff & mctrl) & TIOCM_RI) + port->icount.rng++; + + if ((mctrl_diff & mctrl) & TIOCM_DSR) + port->icount.dsr++; + + if (mctrl_diff & TIOCM_CD) + uart_handle_dcd_change(port, mctrl & TIOCM_CD); + + if (mctrl_diff & TIOCM_CTS) + uart_handle_cts_change(port, mctrl & TIOCM_CTS); + + wake_up_interruptible(&port->state->port.delta_msr_wait); + } + + spin_unlock_irqrestore(&port->lock, flags); + + return IRQ_HANDLED; +} + +/** + * mctrl_gpio_init - initialize uart gpios + * @port: port to initialize gpios for + * @idx: index of the gpio in the @port's device + * + * This will get the {cts,rts,...}-gpios from device tree if they are present + * and request them, set direction etc, and return an allocated structure. + * `devm_*` functions are used, so there's no need to call mctrl_gpio_free(). + * As this sets up the irq handling, make sure to not handle changes to the + * gpio input lines in your driver, too. + */ +struct mctrl_gpios *mctrl_gpio_init(struct uart_port *port, unsigned int idx) +{ + struct mctrl_gpios *gpios; + enum mctrl_gpio_idx i; + + gpios = mctrl_gpio_init_noauto(port->dev, idx); + if (IS_ERR(gpios)) + return gpios; + + gpios->port = port; + + for (i = 0; i < UART_GPIO_MAX; ++i) { + int ret; + + if (!gpios->gpio[i] || mctrl_gpio_flags_is_dir_out(i)) + continue; + + ret = gpiod_to_irq(gpios->gpio[i]); + if (ret < 0) { + dev_err(port->dev, + "failed to find corresponding irq for %s (idx=%d, err=%d)\n", + mctrl_gpios_desc[i].name, idx, ret); + return ERR_PTR(ret); + } + gpios->irq[i] = ret; + + /* irqs should only be enabled in .enable_ms */ + irq_set_status_flags(gpios->irq[i], IRQ_NOAUTOEN); + + ret = devm_request_irq(port->dev, gpios->irq[i], + mctrl_gpio_irq_handle, + IRQ_TYPE_EDGE_BOTH, dev_name(port->dev), + gpios); + if (ret) { + /* alternatively implement polling */ + dev_err(port->dev, + "failed to request irq for %s (idx=%d, err=%d)\n", + mctrl_gpios_desc[i].name, idx, ret); + return ERR_PTR(ret); + } + } + + return gpios; +} +EXPORT_SYMBOL_GPL(mctrl_gpio_init); + +/** + * mctrl_gpio_free - explicitly free uart gpios + * @dev: uart port's device + * @gpios: gpios structure to be freed + * + * This will free the requested gpios in mctrl_gpio_init(). As `devm_*` + * functions are used, there's generally no need to call this function. + */ +void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios) +{ + enum mctrl_gpio_idx i; + + if (gpios == NULL) + return; + + for (i = 0; i < UART_GPIO_MAX; i++) { + if (gpios->irq[i]) + devm_free_irq(gpios->port->dev, gpios->irq[i], gpios); + + if (gpios->gpio[i]) + devm_gpiod_put(dev, gpios->gpio[i]); + } + devm_kfree(dev, gpios); +} +EXPORT_SYMBOL_GPL(mctrl_gpio_free); + +/** + * mctrl_gpio_enable_ms - enable irqs and handling of changes to the ms lines + * @gpios: gpios to enable + */ +void mctrl_gpio_enable_ms(struct mctrl_gpios *gpios) +{ + enum mctrl_gpio_idx i; + + if (gpios == NULL) + return; + + /* .enable_ms may be called multiple times */ + if (gpios->mctrl_on) + return; + + gpios->mctrl_on = true; + + /* get initial status of modem lines GPIOs */ + mctrl_gpio_get(gpios, &gpios->mctrl_prev); + + for (i = 0; i < UART_GPIO_MAX; ++i) { + if (!gpios->irq[i]) + continue; + + enable_irq(gpios->irq[i]); + } +} +EXPORT_SYMBOL_GPL(mctrl_gpio_enable_ms); + +/** + * mctrl_gpio_disable_ms - disable irqs and handling of changes to the ms lines + * @gpios: gpios to disable + */ +void mctrl_gpio_disable_ms(struct mctrl_gpios *gpios) +{ + enum mctrl_gpio_idx i; + + if (gpios == NULL) + return; + + if (!gpios->mctrl_on) + return; + + gpios->mctrl_on = false; + + for (i = 0; i < UART_GPIO_MAX; ++i) { + if (!gpios->irq[i]) + continue; + + disable_irq(gpios->irq[i]); + } +} +EXPORT_SYMBOL_GPL(mctrl_gpio_disable_ms); + +void mctrl_gpio_enable_irq_wake(struct mctrl_gpios *gpios) +{ + enum mctrl_gpio_idx i; + + if (!gpios) + return; + + if (!gpios->mctrl_on) + return; + + for (i = 0; i < UART_GPIO_MAX; ++i) { + if (!gpios->irq[i]) + continue; + + enable_irq_wake(gpios->irq[i]); + } +} +EXPORT_SYMBOL_GPL(mctrl_gpio_enable_irq_wake); + +void mctrl_gpio_disable_irq_wake(struct mctrl_gpios *gpios) +{ + enum mctrl_gpio_idx i; + + if (!gpios) + return; + + if (!gpios->mctrl_on) + return; + + for (i = 0; i < UART_GPIO_MAX; ++i) { + if (!gpios->irq[i]) + continue; + + disable_irq_wake(gpios->irq[i]); + } +} +EXPORT_SYMBOL_GPL(mctrl_gpio_disable_irq_wake); + +MODULE_LICENSE("GPL"); -- cgit v1.2.3