From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/uio/uio_pci_generic.c | 149 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 149 insertions(+) create mode 100644 drivers/uio/uio_pci_generic.c (limited to 'drivers/uio/uio_pci_generic.c') diff --git a/drivers/uio/uio_pci_generic.c b/drivers/uio/uio_pci_generic.c new file mode 100644 index 000000000..e03f9b532 --- /dev/null +++ b/drivers/uio/uio_pci_generic.c @@ -0,0 +1,149 @@ +// SPDX-License-Identifier: GPL-2.0 +/* uio_pci_generic - generic UIO driver for PCI 2.3 devices + * + * Copyright (C) 2009 Red Hat, Inc. + * Author: Michael S. Tsirkin + * + * Since the driver does not declare any device ids, you must allocate + * id and bind the device to the driver yourself. For example: + * + * # echo "8086 10f5" > /sys/bus/pci/drivers/uio_pci_generic/new_id + * # echo -n 0000:00:19.0 > /sys/bus/pci/drivers/e1000e/unbind + * # echo -n 0000:00:19.0 > /sys/bus/pci/drivers/uio_pci_generic/bind + * # ls -l /sys/bus/pci/devices/0000:00:19.0/driver + * .../0000:00:19.0/driver -> ../../../bus/pci/drivers/uio_pci_generic + * + * Driver won't bind to devices which do not support the Interrupt Disable Bit + * in the command register. All devices compliant to PCI 2.3 (circa 2002) and + * all compliant PCI Express devices should support this bit. + */ + +#include +#include +#include +#include +#include + +#define DRIVER_VERSION "0.01.0" +#define DRIVER_AUTHOR "Michael S. Tsirkin " +#define DRIVER_DESC "Generic UIO driver for PCI 2.3 devices" + +struct uio_pci_generic_dev { + struct uio_info info; + struct pci_dev *pdev; +}; + +static inline struct uio_pci_generic_dev * +to_uio_pci_generic_dev(struct uio_info *info) +{ + return container_of(info, struct uio_pci_generic_dev, info); +} + +static int release(struct uio_info *info, struct inode *inode) +{ + struct uio_pci_generic_dev *gdev = to_uio_pci_generic_dev(info); + + /* + * This driver is insecure when used with devices doing DMA, but some +  * people (mis)use it with such devices. +  * Let's at least make sure DMA isn't left enabled after the userspace +  * driver closes the fd. +  * Note that there's a non-zero chance doing this will wedge the device +  * at least until reset. + */ + pci_clear_master(gdev->pdev); + return 0; +} + +/* Interrupt handler. Read/modify/write the command register to disable + * the interrupt. */ +static irqreturn_t irqhandler(int irq, struct uio_info *info) +{ + struct uio_pci_generic_dev *gdev = to_uio_pci_generic_dev(info); + + if (!pci_check_and_mask_intx(gdev->pdev)) + return IRQ_NONE; + + /* UIO core will signal the user process. */ + return IRQ_HANDLED; +} + +static int probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct uio_pci_generic_dev *gdev; + struct uio_mem *uiomem; + int err; + int i; + + err = pcim_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "%s: pci_enable_device failed: %d\n", + __func__, err); + return err; + } + + if (pdev->irq && !pci_intx_mask_supported(pdev)) + return -ENODEV; + + gdev = devm_kzalloc(&pdev->dev, sizeof(struct uio_pci_generic_dev), GFP_KERNEL); + if (!gdev) + return -ENOMEM; + + gdev->info.name = "uio_pci_generic"; + gdev->info.version = DRIVER_VERSION; + gdev->info.release = release; + gdev->pdev = pdev; + if (pdev->irq && (pdev->irq != IRQ_NOTCONNECTED)) { + gdev->info.irq = pdev->irq; + gdev->info.irq_flags = IRQF_SHARED; + gdev->info.handler = irqhandler; + } else { + dev_warn(&pdev->dev, "No IRQ assigned to device: " + "no support for interrupts?\n"); + } + + uiomem = &gdev->info.mem[0]; + for (i = 0; i < MAX_UIO_MAPS; ++i) { + struct resource *r = &pdev->resource[i]; + + if (r->flags != (IORESOURCE_SIZEALIGN | IORESOURCE_MEM)) + continue; + + if (uiomem >= &gdev->info.mem[MAX_UIO_MAPS]) { + dev_warn( + &pdev->dev, + "device has more than " __stringify( + MAX_UIO_MAPS) " I/O memory resources.\n"); + break; + } + + uiomem->memtype = UIO_MEM_PHYS; + uiomem->addr = r->start & PAGE_MASK; + uiomem->offs = r->start & ~PAGE_MASK; + uiomem->size = + (uiomem->offs + resource_size(r) + PAGE_SIZE - 1) & + PAGE_MASK; + uiomem->name = r->name; + ++uiomem; + } + + while (uiomem < &gdev->info.mem[MAX_UIO_MAPS]) { + uiomem->size = 0; + ++uiomem; + } + + return devm_uio_register_device(&pdev->dev, &gdev->info); +} + +static struct pci_driver uio_pci_driver = { + .name = "uio_pci_generic", + .id_table = NULL, /* only dynamic id's */ + .probe = probe, +}; + +module_pci_driver(uio_pci_driver); +MODULE_VERSION(DRIVER_VERSION); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); -- cgit v1.2.3