From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/usb/cdns3/cdnsp-pci.c | 252 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 252 insertions(+) create mode 100644 drivers/usb/cdns3/cdnsp-pci.c (limited to 'drivers/usb/cdns3/cdnsp-pci.c') diff --git a/drivers/usb/cdns3/cdnsp-pci.c b/drivers/usb/cdns3/cdnsp-pci.c new file mode 100644 index 000000000..efd54ed91 --- /dev/null +++ b/drivers/usb/cdns3/cdnsp-pci.c @@ -0,0 +1,252 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Cadence PCI Glue driver. + * + * Copyright (C) 2019 Cadence. + * + * Author: Pawel Laszczak + * + */ + +#include +#include +#include +#include +#include +#include + +#include "core.h" +#include "gadget-export.h" + +#define PCI_BAR_HOST 0 +#define PCI_BAR_OTG 0 +#define PCI_BAR_DEV 2 + +#define PCI_DEV_FN_HOST_DEVICE 0 +#define PCI_DEV_FN_OTG 1 + +#define PCI_DRIVER_NAME "cdns-pci-usbssp" +#define PLAT_DRIVER_NAME "cdns-usbssp" + +#define CDNS_VENDOR_ID 0x17cd +#define CDNS_DEVICE_ID 0x0100 +#define CDNS_DRD_IF (PCI_CLASS_SERIAL_USB << 8 | 0x80) + +static struct pci_dev *cdnsp_get_second_fun(struct pci_dev *pdev) +{ + struct pci_dev *func; + + /* + * Gets the second function. + * It's little tricky, but this platform has two function. + * The fist keeps resources for Host/Device while the second + * keeps resources for DRD/OTG. + */ + func = pci_get_device(pdev->vendor, pdev->device, NULL); + if (!func) + return NULL; + + if (func->devfn == pdev->devfn) { + func = pci_get_device(pdev->vendor, pdev->device, func); + if (!func) + return NULL; + } + + return func; +} + +static int cdnsp_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct device *dev = &pdev->dev; + struct pci_dev *func; + struct resource *res; + struct cdns *cdnsp; + int ret; + + /* + * For GADGET/HOST PCI (devfn) function number is 0, + * for OTG PCI (devfn) function number is 1. + */ + if (!id || (pdev->devfn != PCI_DEV_FN_HOST_DEVICE && + pdev->devfn != PCI_DEV_FN_OTG)) + return -EINVAL; + + func = cdnsp_get_second_fun(pdev); + if (!func) + return -EINVAL; + + if (func->class == PCI_CLASS_SERIAL_USB_XHCI || + pdev->class == PCI_CLASS_SERIAL_USB_XHCI) { + ret = -EINVAL; + goto put_pci; + } + + ret = pcim_enable_device(pdev); + if (ret) { + dev_err(&pdev->dev, "Enabling PCI device has failed %d\n", ret); + goto put_pci; + } + + pci_set_master(pdev); + if (pci_is_enabled(func)) { + cdnsp = pci_get_drvdata(func); + } else { + cdnsp = kzalloc(sizeof(*cdnsp), GFP_KERNEL); + if (!cdnsp) { + ret = -ENOMEM; + goto disable_pci; + } + } + + /* For GADGET device function number is 0. */ + if (pdev->devfn == 0) { + resource_size_t rsrc_start, rsrc_len; + + /* Function 0: host(BAR_0) + device(BAR_1).*/ + dev_dbg(dev, "Initialize resources\n"); + rsrc_start = pci_resource_start(pdev, PCI_BAR_DEV); + rsrc_len = pci_resource_len(pdev, PCI_BAR_DEV); + res = devm_request_mem_region(dev, rsrc_start, rsrc_len, "dev"); + if (!res) { + dev_dbg(dev, "controller already in use\n"); + ret = -EBUSY; + goto free_cdnsp; + } + + cdnsp->dev_regs = devm_ioremap(dev, rsrc_start, rsrc_len); + if (!cdnsp->dev_regs) { + dev_dbg(dev, "error mapping memory\n"); + ret = -EFAULT; + goto free_cdnsp; + } + + cdnsp->dev_irq = pdev->irq; + dev_dbg(dev, "USBSS-DEV physical base addr: %pa\n", + &rsrc_start); + + res = &cdnsp->xhci_res[0]; + res->start = pci_resource_start(pdev, PCI_BAR_HOST); + res->end = pci_resource_end(pdev, PCI_BAR_HOST); + res->name = "xhci"; + res->flags = IORESOURCE_MEM; + dev_dbg(dev, "USBSS-XHCI physical base addr: %pa\n", + &res->start); + + /* Interrupt for XHCI, */ + res = &cdnsp->xhci_res[1]; + res->start = pdev->irq; + res->name = "host"; + res->flags = IORESOURCE_IRQ; + } else { + res = &cdnsp->otg_res; + res->start = pci_resource_start(pdev, PCI_BAR_OTG); + res->end = pci_resource_end(pdev, PCI_BAR_OTG); + res->name = "otg"; + res->flags = IORESOURCE_MEM; + dev_dbg(dev, "CDNSP-DRD physical base addr: %pa\n", + &res->start); + + /* Interrupt for OTG/DRD. */ + cdnsp->otg_irq = pdev->irq; + } + + if (pci_is_enabled(func)) { + cdnsp->dev = dev; + cdnsp->gadget_init = cdnsp_gadget_init; + + ret = cdns_init(cdnsp); + if (ret) + goto free_cdnsp; + } + + pci_set_drvdata(pdev, cdnsp); + + device_wakeup_enable(&pdev->dev); + if (pci_dev_run_wake(pdev)) + pm_runtime_put_noidle(&pdev->dev); + + return 0; + +free_cdnsp: + if (!pci_is_enabled(func)) + kfree(cdnsp); + +disable_pci: + pci_disable_device(pdev); + +put_pci: + pci_dev_put(func); + + return ret; +} + +static void cdnsp_pci_remove(struct pci_dev *pdev) +{ + struct cdns *cdnsp; + struct pci_dev *func; + + func = cdnsp_get_second_fun(pdev); + cdnsp = (struct cdns *)pci_get_drvdata(pdev); + + if (pci_dev_run_wake(pdev)) + pm_runtime_get_noresume(&pdev->dev); + + if (pci_is_enabled(func)) { + cdns_remove(cdnsp); + } else { + kfree(cdnsp); + } + + pci_dev_put(func); +} + +static int __maybe_unused cdnsp_pci_suspend(struct device *dev) +{ + struct cdns *cdns = dev_get_drvdata(dev); + + return cdns_suspend(cdns); +} + +static int __maybe_unused cdnsp_pci_resume(struct device *dev) +{ + struct cdns *cdns = dev_get_drvdata(dev); + unsigned long flags; + int ret; + + spin_lock_irqsave(&cdns->lock, flags); + ret = cdns_resume(cdns, 1); + spin_unlock_irqrestore(&cdns->lock, flags); + + return ret; +} + +static const struct dev_pm_ops cdnsp_pci_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(cdnsp_pci_suspend, cdnsp_pci_resume) +}; + +static const struct pci_device_id cdnsp_pci_ids[] = { + { PCI_VENDOR_ID_CDNS, CDNS_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_SERIAL_USB_DEVICE, PCI_ANY_ID }, + { PCI_VENDOR_ID_CDNS, CDNS_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID, + CDNS_DRD_IF, PCI_ANY_ID }, + { 0, } +}; + +static struct pci_driver cdnsp_pci_driver = { + .name = "cdnsp-pci", + .id_table = &cdnsp_pci_ids[0], + .probe = cdnsp_pci_probe, + .remove = cdnsp_pci_remove, + .driver = { + .pm = &cdnsp_pci_pm_ops, + } +}; + +module_pci_driver(cdnsp_pci_driver); +MODULE_DEVICE_TABLE(pci, cdnsp_pci_ids); + +MODULE_ALIAS("pci:cdnsp"); +MODULE_AUTHOR("Pawel Laszczak "); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Cadence CDNSP PCI driver"); -- cgit v1.2.3