From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/usb/chipidea/host.c | 509 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 509 insertions(+) create mode 100644 drivers/usb/chipidea/host.c (limited to 'drivers/usb/chipidea/host.c') diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c new file mode 100644 index 000000000..ebe740024 --- /dev/null +++ b/drivers/usb/chipidea/host.c @@ -0,0 +1,509 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * host.c - ChipIdea USB host controller driver + * + * Copyright (c) 2012 Intel Corporation + * + * Author: Alexander Shishkin + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "../host/ehci.h" + +#include "ci.h" +#include "bits.h" +#include "host.h" + +static struct hc_driver __read_mostly ci_ehci_hc_driver; +static int (*orig_bus_suspend)(struct usb_hcd *hcd); + +struct ehci_ci_priv { + struct regulator *reg_vbus; + bool enabled; +}; + +struct ci_hdrc_dma_aligned_buffer { + void *kmalloc_ptr; + void *old_xfer_buffer; + u8 data[]; +}; + +static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct ehci_ci_priv *priv = (struct ehci_ci_priv *)ehci->priv; + struct device *dev = hcd->self.controller; + struct ci_hdrc *ci = dev_get_drvdata(dev); + int ret = 0; + int port = HCS_N_PORTS(ehci->hcs_params); + + if (priv->reg_vbus && enable != priv->enabled) { + if (port > 1) { + dev_warn(dev, + "Not support multi-port regulator control\n"); + return 0; + } + if (enable) + ret = regulator_enable(priv->reg_vbus); + else + ret = regulator_disable(priv->reg_vbus); + if (ret) { + dev_err(dev, + "Failed to %s vbus regulator, ret=%d\n", + enable ? "enable" : "disable", ret); + return ret; + } + priv->enabled = enable; + } + + if (ci->platdata->flags & CI_HDRC_PHY_VBUS_CONTROL) { + if (enable) + usb_phy_vbus_on(ci->usb_phy); + else + usb_phy_vbus_off(ci->usb_phy); + } + + if (enable && (ci->platdata->phy_mode == USBPHY_INTERFACE_MODE_HSIC)) { + /* + * Marvell 28nm HSIC PHY requires forcing the port to HS mode. + * As HSIC is always HS, this should be safe for others. + */ + hw_port_test_set(ci, 5); + hw_port_test_set(ci, 0); + } + return 0; +}; + +static int ehci_ci_reset(struct usb_hcd *hcd) +{ + struct device *dev = hcd->self.controller; + struct ci_hdrc *ci = dev_get_drvdata(dev); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + int ret; + + ret = ehci_setup(hcd); + if (ret) + return ret; + + ehci->need_io_watchdog = 0; + + if (ci->platdata->notify_event) { + ret = ci->platdata->notify_event(ci, + CI_HDRC_CONTROLLER_RESET_EVENT); + if (ret) + return ret; + } + + ci_platform_configure(ci); + + return ret; +} + +static const struct ehci_driver_overrides ehci_ci_overrides = { + .extra_priv_size = sizeof(struct ehci_ci_priv), + .port_power = ehci_ci_portpower, + .reset = ehci_ci_reset, +}; + +static irqreturn_t host_irq(struct ci_hdrc *ci) +{ + return usb_hcd_irq(ci->irq, ci->hcd); +} + +static int host_start(struct ci_hdrc *ci) +{ + struct usb_hcd *hcd; + struct ehci_hcd *ehci; + struct ehci_ci_priv *priv; + int ret; + + if (usb_disabled()) + return -ENODEV; + + hcd = __usb_create_hcd(&ci_ehci_hc_driver, ci->dev->parent, + ci->dev, dev_name(ci->dev), NULL); + if (!hcd) + return -ENOMEM; + + dev_set_drvdata(ci->dev, ci); + hcd->rsrc_start = ci->hw_bank.phys; + hcd->rsrc_len = ci->hw_bank.size; + hcd->regs = ci->hw_bank.abs; + hcd->has_tt = 1; + + hcd->power_budget = ci->platdata->power_budget; + hcd->tpl_support = ci->platdata->tpl_support; + if (ci->phy || ci->usb_phy) { + hcd->skip_phy_initialization = 1; + if (ci->usb_phy) + hcd->usb_phy = ci->usb_phy; + } + + ehci = hcd_to_ehci(hcd); + ehci->caps = ci->hw_bank.cap; + ehci->has_hostpc = ci->hw_bank.lpm; + ehci->has_tdi_phy_lpm = ci->hw_bank.lpm; + ehci->imx28_write_fix = ci->imx28_write_fix; + + priv = (struct ehci_ci_priv *)ehci->priv; + priv->reg_vbus = NULL; + + if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) { + if (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON) { + ret = regulator_enable(ci->platdata->reg_vbus); + if (ret) { + dev_err(ci->dev, + "Failed to enable vbus regulator, ret=%d\n", + ret); + goto put_hcd; + } + } else { + priv->reg_vbus = ci->platdata->reg_vbus; + } + } + + if (ci->platdata->pins_host) + pinctrl_select_state(ci->platdata->pctl, + ci->platdata->pins_host); + + ci->hcd = hcd; + + ret = usb_add_hcd(hcd, 0, 0); + if (ret) { + ci->hcd = NULL; + goto disable_reg; + } else { + struct usb_otg *otg = &ci->otg; + + if (ci_otg_is_fsm_mode(ci)) { + otg->host = &hcd->self; + hcd->self.otg_port = 1; + } + + if (ci->platdata->notify_event && + (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC)) + ci->platdata->notify_event + (ci, CI_HDRC_IMX_HSIC_ACTIVE_EVENT); + } + + return ret; + +disable_reg: + if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) && + (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON)) + regulator_disable(ci->platdata->reg_vbus); +put_hcd: + usb_put_hcd(hcd); + + return ret; +} + +static void host_stop(struct ci_hdrc *ci) +{ + struct usb_hcd *hcd = ci->hcd; + + if (hcd) { + if (ci->platdata->notify_event) + ci->platdata->notify_event(ci, + CI_HDRC_CONTROLLER_STOPPED_EVENT); + usb_remove_hcd(hcd); + ci->role = CI_ROLE_END; + synchronize_irq(ci->irq); + usb_put_hcd(hcd); + if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci) && + (ci->platdata->flags & CI_HDRC_TURN_VBUS_EARLY_ON)) + regulator_disable(ci->platdata->reg_vbus); + } + ci->hcd = NULL; + ci->otg.host = NULL; + + if (ci->platdata->pins_host && ci->platdata->pins_default) + pinctrl_select_state(ci->platdata->pctl, + ci->platdata->pins_default); +} + + +void ci_hdrc_host_destroy(struct ci_hdrc *ci) +{ + if (ci->role == CI_ROLE_HOST && ci->hcd) + host_stop(ci); +} + +/* The below code is based on tegra ehci driver */ +static int ci_ehci_hub_control( + struct usb_hcd *hcd, + u16 typeReq, + u16 wValue, + u16 wIndex, + char *buf, + u16 wLength +) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + unsigned int ports = HCS_N_PORTS(ehci->hcs_params); + u32 __iomem *status_reg; + u32 temp, port_index; + unsigned long flags; + int retval = 0; + bool done = false; + struct device *dev = hcd->self.controller; + struct ci_hdrc *ci = dev_get_drvdata(dev); + + port_index = wIndex & 0xff; + port_index -= (port_index > 0); + status_reg = &ehci->regs->port_status[port_index]; + + spin_lock_irqsave(&ehci->lock, flags); + + if (ci->platdata->hub_control) { + retval = ci->platdata->hub_control(ci, typeReq, wValue, wIndex, + buf, wLength, &done, &flags); + if (done) + goto done; + } + + if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) { + if (!wIndex || wIndex > ports) { + retval = -EPIPE; + goto done; + } + + temp = ehci_readl(ehci, status_reg); + if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) { + retval = -EPIPE; + goto done; + } + + temp &= ~(PORT_RWC_BITS | PORT_WKCONN_E); + temp |= PORT_WKDISC_E | PORT_WKOC_E; + ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); + + /* + * If a transaction is in progress, there may be a delay in + * suspending the port. Poll until the port is suspended. + */ + if (ehci_handshake(ehci, status_reg, PORT_SUSPEND, + PORT_SUSPEND, 5000)) + ehci_err(ehci, "timeout waiting for SUSPEND\n"); + + if (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC) { + if (ci->platdata->notify_event) + ci->platdata->notify_event(ci, + CI_HDRC_IMX_HSIC_SUSPEND_EVENT); + + temp = ehci_readl(ehci, status_reg); + temp &= ~(PORT_WKDISC_E | PORT_WKCONN_E); + ehci_writel(ehci, temp, status_reg); + } + + set_bit(port_index, &ehci->suspended_ports); + goto done; + } + + /* + * After resume has finished, it needs do some post resume + * operation for some SoCs. + */ + else if (typeReq == ClearPortFeature && + wValue == USB_PORT_FEAT_C_SUSPEND) { + /* Make sure the resume has finished, it should be finished */ + if (ehci_handshake(ehci, status_reg, PORT_RESUME, 0, 25000)) + ehci_err(ehci, "timeout waiting for resume\n"); + } + + spin_unlock_irqrestore(&ehci->lock, flags); + + /* Handle the hub control events here */ + return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); +done: + spin_unlock_irqrestore(&ehci->lock, flags); + return retval; +} +static int ci_ehci_bus_suspend(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct device *dev = hcd->self.controller; + struct ci_hdrc *ci = dev_get_drvdata(dev); + int port; + u32 tmp; + + int ret = orig_bus_suspend(hcd); + + if (ret) + return ret; + + port = HCS_N_PORTS(ehci->hcs_params); + while (port--) { + u32 __iomem *reg = &ehci->regs->port_status[port]; + u32 portsc = ehci_readl(ehci, reg); + + if (portsc & PORT_CONNECT) { + /* + * For chipidea, the resume signal will be ended + * automatically, so for remote wakeup case, the + * usbcmd.rs may not be set before the resume has + * ended if other resume paths consumes too much + * time (~24ms), in that case, the SOF will not + * send out within 3ms after resume ends, then the + * high speed device will enter full speed mode. + */ + + tmp = ehci_readl(ehci, &ehci->regs->command); + tmp |= CMD_RUN; + ehci_writel(ehci, tmp, &ehci->regs->command); + /* + * It needs a short delay between set RS bit and PHCD. + */ + usleep_range(150, 200); + /* + * Need to clear WKCN and WKOC for imx HSIC, + * otherwise, there will be wakeup event. + */ + if (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC) { + tmp = ehci_readl(ehci, reg); + tmp &= ~(PORT_WKDISC_E | PORT_WKCONN_E); + ehci_writel(ehci, tmp, reg); + } + + break; + } + } + + return 0; +} + +static void ci_hdrc_free_dma_aligned_buffer(struct urb *urb) +{ + struct ci_hdrc_dma_aligned_buffer *temp; + size_t length; + + if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER)) + return; + + temp = container_of(urb->transfer_buffer, + struct ci_hdrc_dma_aligned_buffer, data); + + if (usb_urb_dir_in(urb)) { + if (usb_pipeisoc(urb->pipe)) + length = urb->transfer_buffer_length; + else + length = urb->actual_length; + + memcpy(temp->old_xfer_buffer, temp->data, length); + } + urb->transfer_buffer = temp->old_xfer_buffer; + kfree(temp->kmalloc_ptr); + + urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER; +} + +static int ci_hdrc_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags) +{ + struct ci_hdrc_dma_aligned_buffer *temp, *kmalloc_ptr; + const unsigned int ci_hdrc_usb_dma_align = 32; + size_t kmalloc_size; + + if (urb->num_sgs || urb->sg || urb->transfer_buffer_length == 0 || + !((uintptr_t)urb->transfer_buffer & (ci_hdrc_usb_dma_align - 1))) + return 0; + + /* Allocate a buffer with enough padding for alignment */ + kmalloc_size = urb->transfer_buffer_length + + sizeof(struct ci_hdrc_dma_aligned_buffer) + + ci_hdrc_usb_dma_align - 1; + + kmalloc_ptr = kmalloc(kmalloc_size, mem_flags); + if (!kmalloc_ptr) + return -ENOMEM; + + /* Position our struct dma_aligned_buffer such that data is aligned */ + temp = PTR_ALIGN(kmalloc_ptr + 1, ci_hdrc_usb_dma_align) - 1; + temp->kmalloc_ptr = kmalloc_ptr; + temp->old_xfer_buffer = urb->transfer_buffer; + if (usb_urb_dir_out(urb)) + memcpy(temp->data, urb->transfer_buffer, + urb->transfer_buffer_length); + urb->transfer_buffer = temp->data; + + urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER; + + return 0; +} + +static int ci_hdrc_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, + gfp_t mem_flags) +{ + int ret; + + ret = ci_hdrc_alloc_dma_aligned_buffer(urb, mem_flags); + if (ret) + return ret; + + ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags); + if (ret) + ci_hdrc_free_dma_aligned_buffer(urb); + + return ret; +} + +static void ci_hdrc_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb) +{ + usb_hcd_unmap_urb_for_dma(hcd, urb); + ci_hdrc_free_dma_aligned_buffer(urb); +} + +#ifdef CONFIG_PM_SLEEP +static void ci_hdrc_host_suspend(struct ci_hdrc *ci) +{ + ehci_suspend(ci->hcd, device_may_wakeup(ci->dev)); +} + +static void ci_hdrc_host_resume(struct ci_hdrc *ci, bool power_lost) +{ + ehci_resume(ci->hcd, power_lost); +} +#endif + +int ci_hdrc_host_init(struct ci_hdrc *ci) +{ + struct ci_role_driver *rdrv; + + if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_HC)) + return -ENXIO; + + rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL); + if (!rdrv) + return -ENOMEM; + + rdrv->start = host_start; + rdrv->stop = host_stop; +#ifdef CONFIG_PM_SLEEP + rdrv->suspend = ci_hdrc_host_suspend; + rdrv->resume = ci_hdrc_host_resume; +#endif + rdrv->irq = host_irq; + rdrv->name = "host"; + ci->roles[CI_ROLE_HOST] = rdrv; + + if (ci->platdata->flags & CI_HDRC_REQUIRES_ALIGNED_DMA) { + ci_ehci_hc_driver.map_urb_for_dma = ci_hdrc_map_urb_for_dma; + ci_ehci_hc_driver.unmap_urb_for_dma = ci_hdrc_unmap_urb_for_dma; + } + + return 0; +} + +void ci_hdrc_host_driver_init(void) +{ + ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides); + orig_bus_suspend = ci_ehci_hc_driver.bus_suspend; + ci_ehci_hc_driver.bus_suspend = ci_ehci_bus_suspend; + ci_ehci_hc_driver.hub_control = ci_ehci_hub_control; +} -- cgit v1.2.3