From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/usb/core/devices.c | 546 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 546 insertions(+) create mode 100644 drivers/usb/core/devices.c (limited to 'drivers/usb/core/devices.c') diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c new file mode 100644 index 000000000..2c14a9636 --- /dev/null +++ b/drivers/usb/core/devices.c @@ -0,0 +1,546 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * devices.c + * (C) Copyright 1999 Randy Dunlap. + * (C) Copyright 1999,2000 Thomas Sailer . + * (proc file per device) + * (C) Copyright 1999 Deti Fliegl (new USB architecture) + * + ************************************************************* + * + * /devices contains USB topology, device, config, class, + * interface, & endpoint data. + * + * I considered using /dev/bus/usb/device# for each device + * as it is attached or detached, but I didn't like this for some + * reason -- maybe it's just too deep of a directory structure. + * I also don't like looking in multiple places to gather and view + * the data. Having only one file for ./devices also prevents race + * conditions that could arise if a program was reading device info + * for devices that are being removed (unplugged). (That is, the + * program may find a directory for devnum_12 then try to open it, + * but it was just unplugged, so the directory is now deleted. + * But programs would just have to be prepared for situations like + * this in any plug-and-play environment.) + * + * 1999-12-16: Thomas Sailer + * Converted the whole proc stuff to real + * read methods. Now not the whole device list needs to fit + * into one page, only the device list for one bus. + * Added a poll method to /sys/kernel/debug/usb/devices, to wake + * up an eventual usbd + * 2000-01-04: Thomas Sailer + * Turned into its own filesystem + * 2000-07-05: Ashley Montanaro + * Converted file reading routine to dump to buffer once + * per device, not per bus + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "usb.h" + +/* Define ALLOW_SERIAL_NUMBER if you want to see the serial number of devices */ +#define ALLOW_SERIAL_NUMBER + +static const char format_topo[] = +/* T: Bus=dd Lev=dd Prnt=dd Port=dd Cnt=dd Dev#=ddd Spd=dddd MxCh=dd */ +"\nT: Bus=%2.2d Lev=%2.2d Prnt=%2.2d Port=%2.2d Cnt=%2.2d Dev#=%3d Spd=%-4s MxCh=%2d\n"; + +static const char format_string_manufacturer[] = +/* S: Manufacturer=xxxx */ + "S: Manufacturer=%.100s\n"; + +static const char format_string_product[] = +/* S: Product=xxxx */ + "S: Product=%.100s\n"; + +#ifdef ALLOW_SERIAL_NUMBER +static const char format_string_serialnumber[] = +/* S: SerialNumber=xxxx */ + "S: SerialNumber=%.100s\n"; +#endif + +static const char format_bandwidth[] = +/* B: Alloc=ddd/ddd us (xx%), #Int=ddd, #Iso=ddd */ + "B: Alloc=%3d/%3d us (%2d%%), #Int=%3d, #Iso=%3d\n"; + +static const char format_device1[] = +/* D: Ver=xx.xx Cls=xx(sssss) Sub=xx Prot=xx MxPS=dd #Cfgs=dd */ + "D: Ver=%2x.%02x Cls=%02x(%-5s) Sub=%02x Prot=%02x MxPS=%2d #Cfgs=%3d\n"; + +static const char format_device2[] = +/* P: Vendor=xxxx ProdID=xxxx Rev=xx.xx */ + "P: Vendor=%04x ProdID=%04x Rev=%2x.%02x\n"; + +static const char format_config[] = +/* C: #Ifs=dd Cfg#=dd Atr=xx MPwr=dddmA */ + "C:%c #Ifs=%2d Cfg#=%2d Atr=%02x MxPwr=%3dmA\n"; + +static const char format_iad[] = +/* A: FirstIf#=dd IfCount=dd Cls=xx(sssss) Sub=xx Prot=xx */ + "A: FirstIf#=%2d IfCount=%2d Cls=%02x(%-5s) Sub=%02x Prot=%02x\n"; + +static const char format_iface[] = +/* I: If#=dd Alt=dd #EPs=dd Cls=xx(sssss) Sub=xx Prot=xx Driver=xxxx*/ + "I:%c If#=%2d Alt=%2d #EPs=%2d Cls=%02x(%-5s) Sub=%02x Prot=%02x Driver=%s\n"; + +static const char format_endpt[] = +/* E: Ad=xx(s) Atr=xx(ssss) MxPS=dddd Ivl=D?s */ + "E: Ad=%02x(%c) Atr=%02x(%-4s) MxPS=%4d Ivl=%d%cs\n"; + +struct class_info { + int class; + char *class_name; +}; + +static const struct class_info clas_info[] = { + /* max. 5 chars. per name string */ + {USB_CLASS_PER_INTERFACE, ">ifc"}, + {USB_CLASS_AUDIO, "audio"}, + {USB_CLASS_COMM, "comm."}, + {USB_CLASS_HID, "HID"}, + {USB_CLASS_PHYSICAL, "PID"}, + {USB_CLASS_STILL_IMAGE, "still"}, + {USB_CLASS_PRINTER, "print"}, + {USB_CLASS_MASS_STORAGE, "stor."}, + {USB_CLASS_HUB, "hub"}, + {USB_CLASS_CDC_DATA, "data"}, + {USB_CLASS_CSCID, "scard"}, + {USB_CLASS_CONTENT_SEC, "c-sec"}, + {USB_CLASS_VIDEO, "video"}, + {USB_CLASS_PERSONAL_HEALTHCARE, "perhc"}, + {USB_CLASS_AUDIO_VIDEO, "av"}, + {USB_CLASS_BILLBOARD, "blbrd"}, + {USB_CLASS_USB_TYPE_C_BRIDGE, "bridg"}, + {USB_CLASS_WIRELESS_CONTROLLER, "wlcon"}, + {USB_CLASS_MISC, "misc"}, + {USB_CLASS_APP_SPEC, "app."}, + {USB_CLASS_VENDOR_SPEC, "vend."}, + {-1, "unk."} /* leave as last */ +}; + +/*****************************************************************/ + +static const char *class_decode(const int class) +{ + int ix; + + for (ix = 0; clas_info[ix].class != -1; ix++) + if (clas_info[ix].class == class) + break; + return clas_info[ix].class_name; +} + +static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end, + const struct usb_endpoint_descriptor *desc) +{ + char dir, unit, *type; + unsigned interval, bandwidth = 1; + + if (start > end) + return start; + + dir = usb_endpoint_dir_in(desc) ? 'I' : 'O'; + + if (speed == USB_SPEED_HIGH) + bandwidth = usb_endpoint_maxp_mult(desc); + + /* this isn't checking for illegal values */ + switch (usb_endpoint_type(desc)) { + case USB_ENDPOINT_XFER_CONTROL: + type = "Ctrl"; + dir = 'B'; /* ctrl is bidirectional */ + break; + case USB_ENDPOINT_XFER_ISOC: + type = "Isoc"; + break; + case USB_ENDPOINT_XFER_BULK: + type = "Bulk"; + break; + case USB_ENDPOINT_XFER_INT: + type = "Int."; + break; + default: /* "can't happen" */ + return start; + } + + interval = usb_decode_interval(desc, speed); + if (interval % 1000) { + unit = 'u'; + } else { + unit = 'm'; + interval /= 1000; + } + + start += sprintf(start, format_endpt, desc->bEndpointAddress, dir, + desc->bmAttributes, type, + usb_endpoint_maxp(desc) * + bandwidth, + interval, unit); + return start; +} + +static char *usb_dump_interface_descriptor(char *start, char *end, + const struct usb_interface_cache *intfc, + const struct usb_interface *iface, + int setno) +{ + const struct usb_interface_descriptor *desc; + const char *driver_name = ""; + int active = 0; + + if (start > end) + return start; + desc = &intfc->altsetting[setno].desc; + if (iface) { + driver_name = (iface->dev.driver + ? iface->dev.driver->name + : "(none)"); + active = (desc == &iface->cur_altsetting->desc); + } + start += sprintf(start, format_iface, + active ? '*' : ' ', /* mark active altsetting */ + desc->bInterfaceNumber, + desc->bAlternateSetting, + desc->bNumEndpoints, + desc->bInterfaceClass, + class_decode(desc->bInterfaceClass), + desc->bInterfaceSubClass, + desc->bInterfaceProtocol, + driver_name); + return start; +} + +static char *usb_dump_interface(int speed, char *start, char *end, + const struct usb_interface_cache *intfc, + const struct usb_interface *iface, int setno) +{ + const struct usb_host_interface *desc = &intfc->altsetting[setno]; + int i; + + start = usb_dump_interface_descriptor(start, end, intfc, iface, setno); + for (i = 0; i < desc->desc.bNumEndpoints; i++) { + start = usb_dump_endpoint_descriptor(speed, + start, end, &desc->endpoint[i].desc); + } + return start; +} + +static char *usb_dump_iad_descriptor(char *start, char *end, + const struct usb_interface_assoc_descriptor *iad) +{ + if (start > end) + return start; + start += sprintf(start, format_iad, + iad->bFirstInterface, + iad->bInterfaceCount, + iad->bFunctionClass, + class_decode(iad->bFunctionClass), + iad->bFunctionSubClass, + iad->bFunctionProtocol); + return start; +} + +/* TBD: + * 0. TBDs + * 1. marking active interface altsettings (code lists all, but should mark + * which ones are active, if any) + */ +static char *usb_dump_config_descriptor(char *start, char *end, + const struct usb_config_descriptor *desc, + int active, int speed) +{ + int mul; + + if (start > end) + return start; + if (speed >= USB_SPEED_SUPER) + mul = 8; + else + mul = 2; + start += sprintf(start, format_config, + /* mark active/actual/current cfg. */ + active ? '*' : ' ', + desc->bNumInterfaces, + desc->bConfigurationValue, + desc->bmAttributes, + desc->bMaxPower * mul); + return start; +} + +static char *usb_dump_config(int speed, char *start, char *end, + const struct usb_host_config *config, int active) +{ + int i, j; + struct usb_interface_cache *intfc; + struct usb_interface *interface; + + if (start > end) + return start; + if (!config) + /* getting these some in 2.3.7; none in 2.3.6 */ + return start + sprintf(start, "(null Cfg. desc.)\n"); + start = usb_dump_config_descriptor(start, end, &config->desc, active, + speed); + for (i = 0; i < USB_MAXIADS; i++) { + if (config->intf_assoc[i] == NULL) + break; + start = usb_dump_iad_descriptor(start, end, + config->intf_assoc[i]); + } + for (i = 0; i < config->desc.bNumInterfaces; i++) { + intfc = config->intf_cache[i]; + interface = config->interface[i]; + for (j = 0; j < intfc->num_altsetting; j++) { + start = usb_dump_interface(speed, + start, end, intfc, interface, j); + } + } + return start; +} + +/* + * Dump the different USB descriptors. + */ +static char *usb_dump_device_descriptor(char *start, char *end, + const struct usb_device_descriptor *desc) +{ + u16 bcdUSB = le16_to_cpu(desc->bcdUSB); + u16 bcdDevice = le16_to_cpu(desc->bcdDevice); + + if (start > end) + return start; + start += sprintf(start, format_device1, + bcdUSB >> 8, bcdUSB & 0xff, + desc->bDeviceClass, + class_decode(desc->bDeviceClass), + desc->bDeviceSubClass, + desc->bDeviceProtocol, + desc->bMaxPacketSize0, + desc->bNumConfigurations); + if (start > end) + return start; + start += sprintf(start, format_device2, + le16_to_cpu(desc->idVendor), + le16_to_cpu(desc->idProduct), + bcdDevice >> 8, bcdDevice & 0xff); + return start; +} + +/* + * Dump the different strings that this device holds. + */ +static char *usb_dump_device_strings(char *start, char *end, + struct usb_device *dev) +{ + if (start > end) + return start; + if (dev->manufacturer) + start += sprintf(start, format_string_manufacturer, + dev->manufacturer); + if (start > end) + goto out; + if (dev->product) + start += sprintf(start, format_string_product, dev->product); + if (start > end) + goto out; +#ifdef ALLOW_SERIAL_NUMBER + if (dev->serial) + start += sprintf(start, format_string_serialnumber, + dev->serial); +#endif + out: + return start; +} + +static char *usb_dump_desc(char *start, char *end, struct usb_device *dev) +{ + int i; + + start = usb_dump_device_descriptor(start, end, &dev->descriptor); + + start = usb_dump_device_strings(start, end, dev); + + for (i = 0; i < dev->descriptor.bNumConfigurations; i++) { + start = usb_dump_config(dev->speed, + start, end, dev->config + i, + /* active ? */ + (dev->config + i) == dev->actconfig); + } + return start; +} + +/*****************************************************************/ + +/* This is a recursive function. Parameters: + * buffer - the user-space buffer to write data into + * nbytes - the maximum number of bytes to write + * skip_bytes - the number of bytes to skip before writing anything + * file_offset - the offset into the devices file on completion + * The caller must own the device lock. + */ +static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes, + loff_t *skip_bytes, loff_t *file_offset, + struct usb_device *usbdev, struct usb_bus *bus, + int level, int index, int count) +{ + int chix; + int ret, cnt = 0; + int parent_devnum = 0; + char *pages_start, *data_end, *speed; + unsigned int length; + ssize_t total_written = 0; + struct usb_device *childdev = NULL; + + /* don't bother with anything else if we're not writing any data */ + if (*nbytes <= 0) + return 0; + + if (level > MAX_TOPO_LEVEL) + return 0; + /* allocate 2^1 pages = 8K (on i386); + * should be more than enough for one device */ + pages_start = (char *)__get_free_pages(GFP_NOIO, 1); + if (!pages_start) + return -ENOMEM; + + if (usbdev->parent && usbdev->parent->devnum != -1) + parent_devnum = usbdev->parent->devnum; + /* + * So the root hub's parent is 0 and any device that is + * plugged into the root hub has a parent of 0. + */ + switch (usbdev->speed) { + case USB_SPEED_LOW: + speed = "1.5"; break; + case USB_SPEED_UNKNOWN: /* usb 1.1 root hub code */ + case USB_SPEED_FULL: + speed = "12"; break; + case USB_SPEED_WIRELESS: /* Wireless has no real fixed speed */ + case USB_SPEED_HIGH: + speed = "480"; break; + case USB_SPEED_SUPER: + speed = "5000"; break; + case USB_SPEED_SUPER_PLUS: + speed = "10000"; break; + default: + speed = "??"; + } + data_end = pages_start + sprintf(pages_start, format_topo, + bus->busnum, level, parent_devnum, + index, count, usbdev->devnum, + speed, usbdev->maxchild); + /* + * level = topology-tier level; + * parent_devnum = parent device number; + * index = parent's connector number; + * count = device count at this level + */ + /* If this is the root hub, display the bandwidth information */ + if (level == 0) { + int max; + + /* super/high speed reserves 80%, full/low reserves 90% */ + if (usbdev->speed == USB_SPEED_HIGH || + usbdev->speed >= USB_SPEED_SUPER) + max = 800; + else + max = FRAME_TIME_MAX_USECS_ALLOC; + + /* report "average" periodic allocation over a microsecond. + * the schedules are actually bursty, HCDs need to deal with + * that and just compute/report this average. + */ + data_end += sprintf(data_end, format_bandwidth, + bus->bandwidth_allocated, max, + (100 * bus->bandwidth_allocated + max / 2) + / max, + bus->bandwidth_int_reqs, + bus->bandwidth_isoc_reqs); + + } + data_end = usb_dump_desc(data_end, pages_start + (2 * PAGE_SIZE) - 256, + usbdev); + + if (data_end > (pages_start + (2 * PAGE_SIZE) - 256)) + data_end += sprintf(data_end, "(truncated)\n"); + + length = data_end - pages_start; + /* if we can start copying some data to the user */ + if (length > *skip_bytes) { + length -= *skip_bytes; + if (length > *nbytes) + length = *nbytes; + if (copy_to_user(*buffer, pages_start + *skip_bytes, length)) { + free_pages((unsigned long)pages_start, 1); + return -EFAULT; + } + *nbytes -= length; + *file_offset += length; + total_written += length; + *buffer += length; + *skip_bytes = 0; + } else + *skip_bytes -= length; + + free_pages((unsigned long)pages_start, 1); + + /* Now look at all of this device's children. */ + usb_hub_for_each_child(usbdev, chix, childdev) { + usb_lock_device(childdev); + ret = usb_device_dump(buffer, nbytes, skip_bytes, + file_offset, childdev, bus, + level + 1, chix - 1, ++cnt); + usb_unlock_device(childdev); + if (ret == -EFAULT) + return total_written; + total_written += ret; + } + return total_written; +} + +static ssize_t usb_device_read(struct file *file, char __user *buf, + size_t nbytes, loff_t *ppos) +{ + struct usb_bus *bus; + ssize_t ret, total_written = 0; + loff_t skip_bytes = *ppos; + int id; + + if (*ppos < 0) + return -EINVAL; + if (nbytes <= 0) + return 0; + + mutex_lock(&usb_bus_idr_lock); + /* print devices for all busses */ + idr_for_each_entry(&usb_bus_idr, bus, id) { + /* recurse through all children of the root hub */ + if (!bus_to_hcd(bus)->rh_registered) + continue; + usb_lock_device(bus->root_hub); + ret = usb_device_dump(&buf, &nbytes, &skip_bytes, ppos, + bus->root_hub, bus, 0, 0, 0); + usb_unlock_device(bus->root_hub); + if (ret < 0) { + mutex_unlock(&usb_bus_idr_lock); + return ret; + } + total_written += ret; + } + mutex_unlock(&usb_bus_idr_lock); + return total_written; +} + +const struct file_operations usbfs_devices_fops = { + .llseek = no_seek_end_llseek, + .read = usb_device_read, +}; -- cgit v1.2.3