From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/usb/core/generic.c | 324 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 324 insertions(+) create mode 100644 drivers/usb/core/generic.c (limited to 'drivers/usb/core/generic.c') diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c new file mode 100644 index 000000000..740342a28 --- /dev/null +++ b/drivers/usb/core/generic.c @@ -0,0 +1,324 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * drivers/usb/core/generic.c - generic driver for USB devices (not interfaces) + * + * (C) Copyright 2005 Greg Kroah-Hartman + * + * based on drivers/usb/usb.c which had the following copyrights: + * (C) Copyright Linus Torvalds 1999 + * (C) Copyright Johannes Erdfelt 1999-2001 + * (C) Copyright Andreas Gal 1999 + * (C) Copyright Gregory P. Smith 1999 + * (C) Copyright Deti Fliegl 1999 (new USB architecture) + * (C) Copyright Randy Dunlap 2000 + * (C) Copyright David Brownell 2000-2004 + * (C) Copyright Yggdrasil Computing, Inc. 2000 + * (usb_device_id matching changes by Adam J. Richter) + * (C) Copyright Greg Kroah-Hartman 2002-2003 + * + * Released under the GPLv2 only. + */ + +#include +#include +#include +#include "usb.h" + +static inline const char *plural(int n) +{ + return (n == 1 ? "" : "s"); +} + +static int is_rndis(struct usb_interface_descriptor *desc) +{ + return desc->bInterfaceClass == USB_CLASS_COMM + && desc->bInterfaceSubClass == 2 + && desc->bInterfaceProtocol == 0xff; +} + +static int is_activesync(struct usb_interface_descriptor *desc) +{ + return desc->bInterfaceClass == USB_CLASS_MISC + && desc->bInterfaceSubClass == 1 + && desc->bInterfaceProtocol == 1; +} + +static bool is_audio(struct usb_interface_descriptor *desc) +{ + return desc->bInterfaceClass == USB_CLASS_AUDIO; +} + +static bool is_uac3_config(struct usb_interface_descriptor *desc) +{ + return desc->bInterfaceProtocol == UAC_VERSION_3; +} + +int usb_choose_configuration(struct usb_device *udev) +{ + int i; + int num_configs; + int insufficient_power = 0; + struct usb_host_config *c, *best; + + if (usb_device_is_owned(udev)) + return 0; + + best = NULL; + c = udev->config; + num_configs = udev->descriptor.bNumConfigurations; + for (i = 0; i < num_configs; (i++, c++)) { + struct usb_interface_descriptor *desc = NULL; + + /* It's possible that a config has no interfaces! */ + if (c->desc.bNumInterfaces > 0) + desc = &c->intf_cache[0]->altsetting->desc; + + /* + * HP's USB bus-powered keyboard has only one configuration + * and it claims to be self-powered; other devices may have + * similar errors in their descriptors. If the next test + * were allowed to execute, such configurations would always + * be rejected and the devices would not work as expected. + * In the meantime, we run the risk of selecting a config + * that requires external power at a time when that power + * isn't available. It seems to be the lesser of two evils. + * + * Bugzilla #6448 reports a device that appears to crash + * when it receives a GET_DEVICE_STATUS request! We don't + * have any other way to tell whether a device is self-powered, + * but since we don't use that information anywhere but here, + * the call has been removed. + * + * Maybe the GET_DEVICE_STATUS call and the test below can + * be reinstated when device firmwares become more reliable. + * Don't hold your breath. + */ +#if 0 + /* Rule out self-powered configs for a bus-powered device */ + if (bus_powered && (c->desc.bmAttributes & + USB_CONFIG_ATT_SELFPOWER)) + continue; +#endif + + /* + * The next test may not be as effective as it should be. + * Some hubs have errors in their descriptor, claiming + * to be self-powered when they are really bus-powered. + * We will overestimate the amount of current such hubs + * make available for each port. + * + * This is a fairly benign sort of failure. It won't + * cause us to reject configurations that we should have + * accepted. + */ + + /* Rule out configs that draw too much bus current */ + if (usb_get_max_power(udev, c) > udev->bus_mA) { + insufficient_power++; + continue; + } + + /* + * Select first configuration as default for audio so that + * devices that don't comply with UAC3 protocol are supported. + * But, still iterate through other configurations and + * select UAC3 compliant config if present. + */ + if (desc && is_audio(desc)) { + /* Always prefer the first found UAC3 config */ + if (is_uac3_config(desc)) { + best = c; + break; + } + + /* If there is no UAC3 config, prefer the first config */ + else if (i == 0) + best = c; + + /* Unconditional continue, because the rest of the code + * in the loop is irrelevant for audio devices, and + * because it can reassign best, which for audio devices + * we don't want. + */ + continue; + } + + /* When the first config's first interface is one of Microsoft's + * pet nonstandard Ethernet-over-USB protocols, ignore it unless + * this kernel has enabled the necessary host side driver. + * But: Don't ignore it if it's the only config. + */ + if (i == 0 && num_configs > 1 && desc && + (is_rndis(desc) || is_activesync(desc))) { +#if !defined(CONFIG_USB_NET_RNDIS_HOST) && !defined(CONFIG_USB_NET_RNDIS_HOST_MODULE) + continue; +#else + best = c; +#endif + } + + /* From the remaining configs, choose the first one whose + * first interface is for a non-vendor-specific class. + * Reason: Linux is more likely to have a class driver + * than a vendor-specific driver. */ + else if (udev->descriptor.bDeviceClass != + USB_CLASS_VENDOR_SPEC && + (desc && desc->bInterfaceClass != + USB_CLASS_VENDOR_SPEC)) { + best = c; + break; + } + + /* If all the remaining configs are vendor-specific, + * choose the first one. */ + else if (!best) + best = c; + } + + if (insufficient_power > 0) + dev_info(&udev->dev, "rejected %d configuration%s " + "due to insufficient available bus power\n", + insufficient_power, plural(insufficient_power)); + + if (best) { + i = best->desc.bConfigurationValue; + dev_dbg(&udev->dev, + "configuration #%d chosen from %d choice%s\n", + i, num_configs, plural(num_configs)); + } else { + i = -1; + dev_warn(&udev->dev, + "no configuration chosen from %d choice%s\n", + num_configs, plural(num_configs)); + } + return i; +} +EXPORT_SYMBOL_GPL(usb_choose_configuration); + +static int __check_for_non_generic_match(struct device_driver *drv, void *data) +{ + struct usb_device *udev = data; + struct usb_device_driver *udrv; + + if (!is_usb_device_driver(drv)) + return 0; + udrv = to_usb_device_driver(drv); + if (udrv == &usb_generic_driver) + return 0; + return usb_driver_applicable(udev, udrv); +} + +static bool usb_generic_driver_match(struct usb_device *udev) +{ + if (udev->use_generic_driver) + return true; + + /* + * If any other driver wants the device, leave the device to this other + * driver. + */ + if (bus_for_each_drv(&usb_bus_type, NULL, udev, __check_for_non_generic_match)) + return false; + + return true; +} + +int usb_generic_driver_probe(struct usb_device *udev) +{ + int err, c; + + /* Choose and set the configuration. This registers the interfaces + * with the driver core and lets interface drivers bind to them. + */ + if (udev->authorized == 0) + dev_err(&udev->dev, "Device is not authorized for usage\n"); + else { + c = usb_choose_configuration(udev); + if (c >= 0) { + err = usb_set_configuration(udev, c); + if (err && err != -ENODEV) { + dev_err(&udev->dev, "can't set config #%d, error %d\n", + c, err); + /* This need not be fatal. The user can try to + * set other configurations. */ + } + } + } + /* USB device state == configured ... usable */ + usb_notify_add_device(udev); + + return 0; +} + +void usb_generic_driver_disconnect(struct usb_device *udev) +{ + usb_notify_remove_device(udev); + + /* if this is only an unbind, not a physical disconnect, then + * unconfigure the device */ + if (udev->actconfig) + usb_set_configuration(udev, -1); +} + +#ifdef CONFIG_PM + +int usb_generic_driver_suspend(struct usb_device *udev, pm_message_t msg) +{ + int rc; + + /* Normal USB devices suspend through their upstream port. + * Root hubs don't have upstream ports to suspend, + * so we have to shut down their downstream HC-to-USB + * interfaces manually by doing a bus (or "global") suspend. + */ + if (!udev->parent) + rc = hcd_bus_suspend(udev, msg); + + /* + * Non-root USB2 devices don't need to do anything for FREEZE + * or PRETHAW. USB3 devices don't support global suspend and + * needs to be selectively suspended. + */ + else if ((msg.event == PM_EVENT_FREEZE || msg.event == PM_EVENT_PRETHAW) + && (udev->speed < USB_SPEED_SUPER)) + rc = 0; + else + rc = usb_port_suspend(udev, msg); + + if (rc == 0) + usbfs_notify_suspend(udev); + return rc; +} + +int usb_generic_driver_resume(struct usb_device *udev, pm_message_t msg) +{ + int rc; + + /* Normal USB devices resume/reset through their upstream port. + * Root hubs don't have upstream ports to resume or reset, + * so we have to start up their downstream HC-to-USB + * interfaces manually by doing a bus (or "global") resume. + */ + if (!udev->parent) + rc = hcd_bus_resume(udev, msg); + else + rc = usb_port_resume(udev, msg); + + if (rc == 0) + usbfs_notify_resume(udev); + return rc; +} + +#endif /* CONFIG_PM */ + +struct usb_device_driver usb_generic_driver = { + .name = "usb", + .match = usb_generic_driver_match, + .probe = usb_generic_driver_probe, + .disconnect = usb_generic_driver_disconnect, +#ifdef CONFIG_PM + .suspend = usb_generic_driver_suspend, + .resume = usb_generic_driver_resume, +#endif + .supports_autosuspend = 1, +}; -- cgit v1.2.3