From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/usb/dwc3/dwc3-exynos.c | 249 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 249 insertions(+) create mode 100644 drivers/usb/dwc3/dwc3-exynos.c (limited to 'drivers/usb/dwc3/dwc3-exynos.c') diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c new file mode 100644 index 000000000..4be6a873b --- /dev/null +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dwc3-exynos.c - Samsung Exynos DWC3 Specific Glue layer + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Anton Tikhomirov + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DWC3_EXYNOS_MAX_CLOCKS 4 + +struct dwc3_exynos_driverdata { + const char *clk_names[DWC3_EXYNOS_MAX_CLOCKS]; + int num_clks; + int suspend_clk_idx; +}; + +struct dwc3_exynos { + struct device *dev; + + const char **clk_names; + struct clk *clks[DWC3_EXYNOS_MAX_CLOCKS]; + int num_clks; + int suspend_clk_idx; + + struct regulator *vdd33; + struct regulator *vdd10; +}; + +static int dwc3_exynos_probe(struct platform_device *pdev) +{ + struct dwc3_exynos *exynos; + struct device *dev = &pdev->dev; + struct device_node *node = dev->of_node; + const struct dwc3_exynos_driverdata *driver_data; + int i, ret; + + exynos = devm_kzalloc(dev, sizeof(*exynos), GFP_KERNEL); + if (!exynos) + return -ENOMEM; + + driver_data = of_device_get_match_data(dev); + exynos->dev = dev; + exynos->num_clks = driver_data->num_clks; + exynos->clk_names = (const char **)driver_data->clk_names; + exynos->suspend_clk_idx = driver_data->suspend_clk_idx; + + platform_set_drvdata(pdev, exynos); + + for (i = 0; i < exynos->num_clks; i++) { + exynos->clks[i] = devm_clk_get(dev, exynos->clk_names[i]); + if (IS_ERR(exynos->clks[i])) { + dev_err(dev, "failed to get clock: %s\n", + exynos->clk_names[i]); + return PTR_ERR(exynos->clks[i]); + } + } + + for (i = 0; i < exynos->num_clks; i++) { + ret = clk_prepare_enable(exynos->clks[i]); + if (ret) { + while (i-- > 0) + clk_disable_unprepare(exynos->clks[i]); + return ret; + } + } + + if (exynos->suspend_clk_idx >= 0) + clk_prepare_enable(exynos->clks[exynos->suspend_clk_idx]); + + exynos->vdd33 = devm_regulator_get(dev, "vdd33"); + if (IS_ERR(exynos->vdd33)) { + ret = PTR_ERR(exynos->vdd33); + goto vdd33_err; + } + ret = regulator_enable(exynos->vdd33); + if (ret) { + dev_err(dev, "Failed to enable VDD33 supply\n"); + goto vdd33_err; + } + + exynos->vdd10 = devm_regulator_get(dev, "vdd10"); + if (IS_ERR(exynos->vdd10)) { + ret = PTR_ERR(exynos->vdd10); + goto vdd10_err; + } + ret = regulator_enable(exynos->vdd10); + if (ret) { + dev_err(dev, "Failed to enable VDD10 supply\n"); + goto vdd10_err; + } + + if (node) { + ret = of_platform_populate(node, NULL, NULL, dev); + if (ret) { + dev_err(dev, "failed to add dwc3 core\n"); + goto populate_err; + } + } else { + dev_err(dev, "no device node, failed to add dwc3 core\n"); + ret = -ENODEV; + goto populate_err; + } + + return 0; + +populate_err: + regulator_disable(exynos->vdd10); +vdd10_err: + regulator_disable(exynos->vdd33); +vdd33_err: + for (i = exynos->num_clks - 1; i >= 0; i--) + clk_disable_unprepare(exynos->clks[i]); + + if (exynos->suspend_clk_idx >= 0) + clk_disable_unprepare(exynos->clks[exynos->suspend_clk_idx]); + + return ret; +} + +static int dwc3_exynos_remove(struct platform_device *pdev) +{ + struct dwc3_exynos *exynos = platform_get_drvdata(pdev); + int i; + + of_platform_depopulate(&pdev->dev); + + for (i = exynos->num_clks - 1; i >= 0; i--) + clk_disable_unprepare(exynos->clks[i]); + + if (exynos->suspend_clk_idx >= 0) + clk_disable_unprepare(exynos->clks[exynos->suspend_clk_idx]); + + regulator_disable(exynos->vdd33); + regulator_disable(exynos->vdd10); + + return 0; +} + +static const struct dwc3_exynos_driverdata exynos5250_drvdata = { + .clk_names = { "usbdrd30" }, + .num_clks = 1, + .suspend_clk_idx = -1, +}; + +static const struct dwc3_exynos_driverdata exynos5433_drvdata = { + .clk_names = { "aclk", "susp_clk", "pipe_pclk", "phyclk" }, + .num_clks = 4, + .suspend_clk_idx = 1, +}; + +static const struct dwc3_exynos_driverdata exynos7_drvdata = { + .clk_names = { "usbdrd30", "usbdrd30_susp_clk", "usbdrd30_axius_clk" }, + .num_clks = 3, + .suspend_clk_idx = 1, +}; + +static const struct of_device_id exynos_dwc3_match[] = { + { + .compatible = "samsung,exynos5250-dwusb3", + .data = &exynos5250_drvdata, + }, { + .compatible = "samsung,exynos5433-dwusb3", + .data = &exynos5433_drvdata, + }, { + .compatible = "samsung,exynos7-dwusb3", + .data = &exynos7_drvdata, + }, { + } +}; +MODULE_DEVICE_TABLE(of, exynos_dwc3_match); + +#ifdef CONFIG_PM_SLEEP +static int dwc3_exynos_suspend(struct device *dev) +{ + struct dwc3_exynos *exynos = dev_get_drvdata(dev); + int i; + + for (i = exynos->num_clks - 1; i >= 0; i--) + clk_disable_unprepare(exynos->clks[i]); + + regulator_disable(exynos->vdd33); + regulator_disable(exynos->vdd10); + + return 0; +} + +static int dwc3_exynos_resume(struct device *dev) +{ + struct dwc3_exynos *exynos = dev_get_drvdata(dev); + int i, ret; + + ret = regulator_enable(exynos->vdd33); + if (ret) { + dev_err(dev, "Failed to enable VDD33 supply\n"); + return ret; + } + ret = regulator_enable(exynos->vdd10); + if (ret) { + dev_err(dev, "Failed to enable VDD10 supply\n"); + return ret; + } + + for (i = 0; i < exynos->num_clks; i++) { + ret = clk_prepare_enable(exynos->clks[i]); + if (ret) { + while (i-- > 0) + clk_disable_unprepare(exynos->clks[i]); + return ret; + } + } + + return 0; +} + +static const struct dev_pm_ops dwc3_exynos_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(dwc3_exynos_suspend, dwc3_exynos_resume) +}; + +#define DEV_PM_OPS (&dwc3_exynos_dev_pm_ops) +#else +#define DEV_PM_OPS NULL +#endif /* CONFIG_PM_SLEEP */ + +static struct platform_driver dwc3_exynos_driver = { + .probe = dwc3_exynos_probe, + .remove = dwc3_exynos_remove, + .driver = { + .name = "exynos-dwc3", + .of_match_table = exynos_dwc3_match, + .pm = DEV_PM_OPS, + }, +}; + +module_platform_driver(dwc3_exynos_driver); + +MODULE_AUTHOR("Anton Tikhomirov "); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("DesignWare USB3 Exynos Glue Layer"); -- cgit v1.2.3