From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/usb/dwc3/dwc3-imx8mp.c | 427 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 427 insertions(+) create mode 100644 drivers/usb/dwc3/dwc3-imx8mp.c (limited to 'drivers/usb/dwc3/dwc3-imx8mp.c') diff --git a/drivers/usb/dwc3/dwc3-imx8mp.c b/drivers/usb/dwc3/dwc3-imx8mp.c new file mode 100644 index 000000000..174f07614 --- /dev/null +++ b/drivers/usb/dwc3/dwc3-imx8mp.c @@ -0,0 +1,427 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dwc3-imx8mp.c - NXP imx8mp Specific Glue layer + * + * Copyright (c) 2020 NXP. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "core.h" + +/* USB wakeup registers */ +#define USB_WAKEUP_CTRL 0x00 + +/* Global wakeup interrupt enable, also used to clear interrupt */ +#define USB_WAKEUP_EN BIT(31) +/* Wakeup from connect or disconnect, only for superspeed */ +#define USB_WAKEUP_SS_CONN BIT(5) +/* 0 select vbus_valid, 1 select sessvld */ +#define USB_WAKEUP_VBUS_SRC_SESS_VAL BIT(4) +/* Enable signal for wake up from u3 state */ +#define USB_WAKEUP_U3_EN BIT(3) +/* Enable signal for wake up from id change */ +#define USB_WAKEUP_ID_EN BIT(2) +/* Enable signal for wake up from vbus change */ +#define USB_WAKEUP_VBUS_EN BIT(1) +/* Enable signal for wake up from dp/dm change */ +#define USB_WAKEUP_DPDM_EN BIT(0) + +#define USB_WAKEUP_EN_MASK GENMASK(5, 0) + +/* USB glue registers */ +#define USB_CTRL0 0x00 +#define USB_CTRL1 0x04 + +#define USB_CTRL0_PORTPWR_EN BIT(12) /* 1 - PPC enabled (default) */ +#define USB_CTRL0_USB3_FIXED BIT(22) /* 1 - USB3 permanent attached */ +#define USB_CTRL0_USB2_FIXED BIT(23) /* 1 - USB2 permanent attached */ + +#define USB_CTRL1_OC_POLARITY BIT(16) /* 0 - HIGH / 1 - LOW */ +#define USB_CTRL1_PWR_POLARITY BIT(17) /* 0 - HIGH / 1 - LOW */ + +struct dwc3_imx8mp { + struct device *dev; + struct platform_device *dwc3; + void __iomem *hsio_blk_base; + void __iomem *glue_base; + struct clk *hsio_clk; + struct clk *suspend_clk; + int irq; + bool pm_suspended; + bool wakeup_pending; +}; + +static void imx8mp_configure_glue(struct dwc3_imx8mp *dwc3_imx) +{ + struct device *dev = dwc3_imx->dev; + u32 value; + + if (!dwc3_imx->glue_base) + return; + + value = readl(dwc3_imx->glue_base + USB_CTRL0); + + if (device_property_read_bool(dev, "fsl,permanently-attached")) + value |= (USB_CTRL0_USB2_FIXED | USB_CTRL0_USB3_FIXED); + else + value &= ~(USB_CTRL0_USB2_FIXED | USB_CTRL0_USB3_FIXED); + + if (device_property_read_bool(dev, "fsl,disable-port-power-control")) + value &= ~(USB_CTRL0_PORTPWR_EN); + else + value |= USB_CTRL0_PORTPWR_EN; + + writel(value, dwc3_imx->glue_base + USB_CTRL0); + + value = readl(dwc3_imx->glue_base + USB_CTRL1); + if (device_property_read_bool(dev, "fsl,over-current-active-low")) + value |= USB_CTRL1_OC_POLARITY; + else + value &= ~USB_CTRL1_OC_POLARITY; + + if (device_property_read_bool(dev, "fsl,power-active-low")) + value |= USB_CTRL1_PWR_POLARITY; + else + value &= ~USB_CTRL1_PWR_POLARITY; + + writel(value, dwc3_imx->glue_base + USB_CTRL1); +} + +static void dwc3_imx8mp_wakeup_enable(struct dwc3_imx8mp *dwc3_imx) +{ + struct dwc3 *dwc3 = platform_get_drvdata(dwc3_imx->dwc3); + u32 val; + + if (!dwc3) + return; + + val = readl(dwc3_imx->hsio_blk_base + USB_WAKEUP_CTRL); + + if ((dwc3->current_dr_role == DWC3_GCTL_PRTCAP_HOST) && dwc3->xhci) + val |= USB_WAKEUP_EN | USB_WAKEUP_SS_CONN | + USB_WAKEUP_U3_EN | USB_WAKEUP_DPDM_EN; + else if (dwc3->current_dr_role == DWC3_GCTL_PRTCAP_DEVICE) + val |= USB_WAKEUP_EN | USB_WAKEUP_VBUS_EN | + USB_WAKEUP_VBUS_SRC_SESS_VAL; + + writel(val, dwc3_imx->hsio_blk_base + USB_WAKEUP_CTRL); +} + +static void dwc3_imx8mp_wakeup_disable(struct dwc3_imx8mp *dwc3_imx) +{ + u32 val; + + val = readl(dwc3_imx->hsio_blk_base + USB_WAKEUP_CTRL); + val &= ~(USB_WAKEUP_EN | USB_WAKEUP_EN_MASK); + writel(val, dwc3_imx->hsio_blk_base + USB_WAKEUP_CTRL); +} + +static irqreturn_t dwc3_imx8mp_interrupt(int irq, void *_dwc3_imx) +{ + struct dwc3_imx8mp *dwc3_imx = _dwc3_imx; + struct dwc3 *dwc = platform_get_drvdata(dwc3_imx->dwc3); + + if (!dwc3_imx->pm_suspended) + return IRQ_HANDLED; + + disable_irq_nosync(dwc3_imx->irq); + dwc3_imx->wakeup_pending = true; + + if ((dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) && dwc->xhci) + pm_runtime_resume(&dwc->xhci->dev); + else if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_DEVICE) + pm_runtime_get(dwc->dev); + + return IRQ_HANDLED; +} + +static int dwc3_imx8mp_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *dwc3_np, *node = dev->of_node; + struct dwc3_imx8mp *dwc3_imx; + struct resource *res; + int err, irq; + + if (!node) { + dev_err(dev, "device node not found\n"); + return -EINVAL; + } + + dwc3_imx = devm_kzalloc(dev, sizeof(*dwc3_imx), GFP_KERNEL); + if (!dwc3_imx) + return -ENOMEM; + + platform_set_drvdata(pdev, dwc3_imx); + + dwc3_imx->dev = dev; + + dwc3_imx->hsio_blk_base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(dwc3_imx->hsio_blk_base)) + return PTR_ERR(dwc3_imx->hsio_blk_base); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res) { + dev_warn(dev, "Base address for glue layer missing. Continuing without, some features are missing though."); + } else { + dwc3_imx->glue_base = devm_ioremap_resource(dev, res); + if (IS_ERR(dwc3_imx->glue_base)) + return PTR_ERR(dwc3_imx->glue_base); + } + + dwc3_imx->hsio_clk = devm_clk_get(dev, "hsio"); + if (IS_ERR(dwc3_imx->hsio_clk)) { + err = PTR_ERR(dwc3_imx->hsio_clk); + dev_err(dev, "Failed to get hsio clk, err=%d\n", err); + return err; + } + + err = clk_prepare_enable(dwc3_imx->hsio_clk); + if (err) { + dev_err(dev, "Failed to enable hsio clk, err=%d\n", err); + return err; + } + + dwc3_imx->suspend_clk = devm_clk_get(dev, "suspend"); + if (IS_ERR(dwc3_imx->suspend_clk)) { + err = PTR_ERR(dwc3_imx->suspend_clk); + dev_err(dev, "Failed to get suspend clk, err=%d\n", err); + goto disable_hsio_clk; + } + + err = clk_prepare_enable(dwc3_imx->suspend_clk); + if (err) { + dev_err(dev, "Failed to enable suspend clk, err=%d\n", err); + goto disable_hsio_clk; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + err = irq; + goto disable_clks; + } + dwc3_imx->irq = irq; + + imx8mp_configure_glue(dwc3_imx); + + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + err = pm_runtime_get_sync(dev); + if (err < 0) + goto disable_rpm; + + dwc3_np = of_get_compatible_child(node, "snps,dwc3"); + if (!dwc3_np) { + err = -ENODEV; + dev_err(dev, "failed to find dwc3 core child\n"); + goto disable_rpm; + } + + err = of_platform_populate(node, NULL, NULL, dev); + if (err) { + dev_err(&pdev->dev, "failed to create dwc3 core\n"); + goto err_node_put; + } + + dwc3_imx->dwc3 = of_find_device_by_node(dwc3_np); + if (!dwc3_imx->dwc3) { + dev_err(dev, "failed to get dwc3 platform device\n"); + err = -ENODEV; + goto depopulate; + } + of_node_put(dwc3_np); + + err = devm_request_threaded_irq(dev, irq, NULL, dwc3_imx8mp_interrupt, + IRQF_ONESHOT, dev_name(dev), dwc3_imx); + if (err) { + dev_err(dev, "failed to request IRQ #%d --> %d\n", irq, err); + goto depopulate; + } + + device_set_wakeup_capable(dev, true); + pm_runtime_put(dev); + + return 0; + +depopulate: + of_platform_depopulate(dev); +err_node_put: + of_node_put(dwc3_np); +disable_rpm: + pm_runtime_disable(dev); + pm_runtime_put_noidle(dev); +disable_clks: + clk_disable_unprepare(dwc3_imx->suspend_clk); +disable_hsio_clk: + clk_disable_unprepare(dwc3_imx->hsio_clk); + + return err; +} + +static int dwc3_imx8mp_remove(struct platform_device *pdev) +{ + struct dwc3_imx8mp *dwc3_imx = platform_get_drvdata(pdev); + struct device *dev = &pdev->dev; + + pm_runtime_get_sync(dev); + of_platform_depopulate(dev); + + clk_disable_unprepare(dwc3_imx->suspend_clk); + clk_disable_unprepare(dwc3_imx->hsio_clk); + + pm_runtime_disable(dev); + pm_runtime_put_noidle(dev); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static int __maybe_unused dwc3_imx8mp_suspend(struct dwc3_imx8mp *dwc3_imx, + pm_message_t msg) +{ + if (dwc3_imx->pm_suspended) + return 0; + + /* Wakeup enable */ + if (PMSG_IS_AUTO(msg) || device_may_wakeup(dwc3_imx->dev)) + dwc3_imx8mp_wakeup_enable(dwc3_imx); + + dwc3_imx->pm_suspended = true; + + return 0; +} + +static int __maybe_unused dwc3_imx8mp_resume(struct dwc3_imx8mp *dwc3_imx, + pm_message_t msg) +{ + struct dwc3 *dwc = platform_get_drvdata(dwc3_imx->dwc3); + int ret = 0; + + if (!dwc3_imx->pm_suspended) + return 0; + + /* Wakeup disable */ + dwc3_imx8mp_wakeup_disable(dwc3_imx); + dwc3_imx->pm_suspended = false; + + /* Upon power loss any previous configuration is lost, restore it */ + imx8mp_configure_glue(dwc3_imx); + + if (dwc3_imx->wakeup_pending) { + dwc3_imx->wakeup_pending = false; + if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_DEVICE) { + pm_runtime_mark_last_busy(dwc->dev); + pm_runtime_put_autosuspend(dwc->dev); + } else { + /* + * Add wait for xhci switch from suspend + * clock to normal clock to detect connection. + */ + usleep_range(9000, 10000); + } + enable_irq(dwc3_imx->irq); + } + + return ret; +} + +static int __maybe_unused dwc3_imx8mp_pm_suspend(struct device *dev) +{ + struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev); + int ret; + + ret = dwc3_imx8mp_suspend(dwc3_imx, PMSG_SUSPEND); + + if (device_may_wakeup(dwc3_imx->dev)) + enable_irq_wake(dwc3_imx->irq); + else + clk_disable_unprepare(dwc3_imx->suspend_clk); + + clk_disable_unprepare(dwc3_imx->hsio_clk); + dev_dbg(dev, "dwc3 imx8mp pm suspend.\n"); + + return ret; +} + +static int __maybe_unused dwc3_imx8mp_pm_resume(struct device *dev) +{ + struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev); + int ret; + + if (device_may_wakeup(dwc3_imx->dev)) { + disable_irq_wake(dwc3_imx->irq); + } else { + ret = clk_prepare_enable(dwc3_imx->suspend_clk); + if (ret) + return ret; + } + + ret = clk_prepare_enable(dwc3_imx->hsio_clk); + if (ret) + return ret; + + ret = dwc3_imx8mp_resume(dwc3_imx, PMSG_RESUME); + + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + dev_dbg(dev, "dwc3 imx8mp pm resume.\n"); + + return ret; +} + +static int __maybe_unused dwc3_imx8mp_runtime_suspend(struct device *dev) +{ + struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev); + + dev_dbg(dev, "dwc3 imx8mp runtime suspend.\n"); + + return dwc3_imx8mp_suspend(dwc3_imx, PMSG_AUTO_SUSPEND); +} + +static int __maybe_unused dwc3_imx8mp_runtime_resume(struct device *dev) +{ + struct dwc3_imx8mp *dwc3_imx = dev_get_drvdata(dev); + + dev_dbg(dev, "dwc3 imx8mp runtime resume.\n"); + + return dwc3_imx8mp_resume(dwc3_imx, PMSG_AUTO_RESUME); +} + +static const struct dev_pm_ops dwc3_imx8mp_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(dwc3_imx8mp_pm_suspend, dwc3_imx8mp_pm_resume) + SET_RUNTIME_PM_OPS(dwc3_imx8mp_runtime_suspend, + dwc3_imx8mp_runtime_resume, NULL) +}; + +static const struct of_device_id dwc3_imx8mp_of_match[] = { + { .compatible = "fsl,imx8mp-dwc3", }, + {}, +}; +MODULE_DEVICE_TABLE(of, dwc3_imx8mp_of_match); + +static struct platform_driver dwc3_imx8mp_driver = { + .probe = dwc3_imx8mp_probe, + .remove = dwc3_imx8mp_remove, + .driver = { + .name = "imx8mp-dwc3", + .pm = &dwc3_imx8mp_dev_pm_ops, + .of_match_table = dwc3_imx8mp_of_match, + }, +}; + +module_platform_driver(dwc3_imx8mp_driver); + +MODULE_ALIAS("platform:imx8mp-dwc3"); +MODULE_AUTHOR("jun.li@nxp.com"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("DesignWare USB3 imx8mp Glue Layer"); -- cgit v1.2.3