From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/usb/gadget/legacy/dbgp.c | 439 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 439 insertions(+) create mode 100644 drivers/usb/gadget/legacy/dbgp.c (limited to 'drivers/usb/gadget/legacy/dbgp.c') diff --git a/drivers/usb/gadget/legacy/dbgp.c b/drivers/usb/gadget/legacy/dbgp.c new file mode 100644 index 000000000..b62e45235 --- /dev/null +++ b/drivers/usb/gadget/legacy/dbgp.c @@ -0,0 +1,439 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dbgp.c -- EHCI Debug Port device gadget + * + * Copyright (C) 2010 Stephane Duverger + * + * Released under the GPLv2. + */ + +/* verbose messages */ +#include +#include +#include +#include +#include + +#include "u_serial.h" + +#define DRIVER_VENDOR_ID 0x0525 /* NetChip */ +#define DRIVER_PRODUCT_ID 0xc0de /* undefined */ + +#define USB_DEBUG_MAX_PACKET_SIZE 8 +#define DBGP_REQ_EP0_LEN 128 +#define DBGP_REQ_LEN 512 + +static struct dbgp { + struct usb_gadget *gadget; + struct usb_request *req; + struct usb_ep *i_ep; + struct usb_ep *o_ep; +#ifdef CONFIG_USB_G_DBGP_SERIAL + struct gserial *serial; +#endif +} dbgp; + +static struct usb_device_descriptor device_desc = { + .bLength = sizeof device_desc, + .bDescriptorType = USB_DT_DEVICE, + .bcdUSB = cpu_to_le16(0x0200), + .bDeviceClass = USB_CLASS_VENDOR_SPEC, + .idVendor = cpu_to_le16(DRIVER_VENDOR_ID), + .idProduct = cpu_to_le16(DRIVER_PRODUCT_ID), + .bNumConfigurations = 1, +}; + +static struct usb_debug_descriptor dbg_desc = { + .bLength = sizeof dbg_desc, + .bDescriptorType = USB_DT_DEBUG, +}; + +static struct usb_endpoint_descriptor i_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .bEndpointAddress = USB_DIR_IN, +}; + +static struct usb_endpoint_descriptor o_desc = { + .bLength = USB_DT_ENDPOINT_SIZE, + .bDescriptorType = USB_DT_ENDPOINT, + .bmAttributes = USB_ENDPOINT_XFER_BULK, + .bEndpointAddress = USB_DIR_OUT, +}; + +#ifdef CONFIG_USB_G_DBGP_PRINTK +static int dbgp_consume(char *buf, unsigned len) +{ + char c; + + if (!len) + return 0; + + c = buf[len-1]; + if (c != 0) + buf[len-1] = 0; + + printk(KERN_NOTICE "%s%c", buf, c); + return 0; +} + +static void __disable_ep(struct usb_ep *ep) +{ + usb_ep_disable(ep); +} + +static void dbgp_disable_ep(void) +{ + __disable_ep(dbgp.i_ep); + __disable_ep(dbgp.o_ep); +} + +static void dbgp_complete(struct usb_ep *ep, struct usb_request *req) +{ + int stp; + int err = 0; + int status = req->status; + + if (ep == dbgp.i_ep) { + stp = 1; + goto fail; + } + + if (status != 0) { + stp = 2; + goto release_req; + } + + dbgp_consume(req->buf, req->actual); + + req->length = DBGP_REQ_LEN; + err = usb_ep_queue(ep, req, GFP_ATOMIC); + if (err < 0) { + stp = 3; + goto release_req; + } + + return; + +release_req: + kfree(req->buf); + usb_ep_free_request(dbgp.o_ep, req); + dbgp_disable_ep(); +fail: + dev_dbg(&dbgp.gadget->dev, + "complete: failure (%d:%d) ==> %d\n", stp, err, status); +} + +static int dbgp_enable_ep_req(struct usb_ep *ep) +{ + int err, stp; + struct usb_request *req; + + req = usb_ep_alloc_request(ep, GFP_KERNEL); + if (!req) { + err = -ENOMEM; + stp = 1; + goto fail_1; + } + + req->buf = kzalloc(DBGP_REQ_LEN, GFP_KERNEL); + if (!req->buf) { + err = -ENOMEM; + stp = 2; + goto fail_2; + } + + req->complete = dbgp_complete; + req->length = DBGP_REQ_LEN; + err = usb_ep_queue(ep, req, GFP_ATOMIC); + if (err < 0) { + stp = 3; + goto fail_3; + } + + return 0; + +fail_3: + kfree(req->buf); +fail_2: + usb_ep_free_request(dbgp.o_ep, req); +fail_1: + dev_dbg(&dbgp.gadget->dev, + "enable ep req: failure (%d:%d)\n", stp, err); + return err; +} + +static int __enable_ep(struct usb_ep *ep, struct usb_endpoint_descriptor *desc) +{ + int err; + ep->desc = desc; + err = usb_ep_enable(ep); + return err; +} + +static int dbgp_enable_ep(void) +{ + int err, stp; + + err = __enable_ep(dbgp.i_ep, &i_desc); + if (err < 0) { + stp = 1; + goto fail_1; + } + + err = __enable_ep(dbgp.o_ep, &o_desc); + if (err < 0) { + stp = 2; + goto fail_2; + } + + err = dbgp_enable_ep_req(dbgp.o_ep); + if (err < 0) { + stp = 3; + goto fail_3; + } + + return 0; + +fail_3: + __disable_ep(dbgp.o_ep); +fail_2: + __disable_ep(dbgp.i_ep); +fail_1: + dev_dbg(&dbgp.gadget->dev, "enable ep: failure (%d:%d)\n", stp, err); + return err; +} +#endif + +static void dbgp_disconnect(struct usb_gadget *gadget) +{ +#ifdef CONFIG_USB_G_DBGP_PRINTK + dbgp_disable_ep(); +#else + gserial_disconnect(dbgp.serial); +#endif +} + +static void dbgp_unbind(struct usb_gadget *gadget) +{ +#ifdef CONFIG_USB_G_DBGP_SERIAL + kfree(dbgp.serial); + dbgp.serial = NULL; +#endif + if (dbgp.req) { + kfree(dbgp.req->buf); + usb_ep_free_request(gadget->ep0, dbgp.req); + dbgp.req = NULL; + } +} + +#ifdef CONFIG_USB_G_DBGP_SERIAL +static unsigned char tty_line; +#endif + +static int dbgp_configure_endpoints(struct usb_gadget *gadget) +{ + int stp; + + usb_ep_autoconfig_reset(gadget); + + dbgp.i_ep = usb_ep_autoconfig(gadget, &i_desc); + if (!dbgp.i_ep) { + stp = 1; + goto fail_1; + } + + i_desc.wMaxPacketSize = + cpu_to_le16(USB_DEBUG_MAX_PACKET_SIZE); + + dbgp.o_ep = usb_ep_autoconfig(gadget, &o_desc); + if (!dbgp.o_ep) { + stp = 2; + goto fail_1; + } + + o_desc.wMaxPacketSize = + cpu_to_le16(USB_DEBUG_MAX_PACKET_SIZE); + + dbg_desc.bDebugInEndpoint = i_desc.bEndpointAddress; + dbg_desc.bDebugOutEndpoint = o_desc.bEndpointAddress; + +#ifdef CONFIG_USB_G_DBGP_SERIAL + dbgp.serial->in = dbgp.i_ep; + dbgp.serial->out = dbgp.o_ep; + + dbgp.serial->in->desc = &i_desc; + dbgp.serial->out->desc = &o_desc; +#endif + + return 0; + +fail_1: + dev_dbg(&dbgp.gadget->dev, "ep config: failure (%d)\n", stp); + return -ENODEV; +} + +static int dbgp_bind(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + int err, stp; + + dbgp.gadget = gadget; + + dbgp.req = usb_ep_alloc_request(gadget->ep0, GFP_KERNEL); + if (!dbgp.req) { + err = -ENOMEM; + stp = 1; + goto fail; + } + + dbgp.req->buf = kmalloc(DBGP_REQ_EP0_LEN, GFP_KERNEL); + if (!dbgp.req->buf) { + err = -ENOMEM; + stp = 2; + goto fail; + } + + dbgp.req->length = DBGP_REQ_EP0_LEN; + +#ifdef CONFIG_USB_G_DBGP_SERIAL + dbgp.serial = kzalloc(sizeof(struct gserial), GFP_KERNEL); + if (!dbgp.serial) { + stp = 3; + err = -ENOMEM; + goto fail; + } + + if (gserial_alloc_line(&tty_line)) { + stp = 4; + err = -ENODEV; + goto fail; + } +#endif + + err = dbgp_configure_endpoints(gadget); + if (err < 0) { + stp = 5; + goto fail; + } + + dev_dbg(&dbgp.gadget->dev, "bind: success\n"); + return 0; + +fail: + dev_dbg(&gadget->dev, "bind: failure (%d:%d)\n", stp, err); + dbgp_unbind(gadget); + return err; +} + +static void dbgp_setup_complete(struct usb_ep *ep, + struct usb_request *req) +{ + dev_dbg(&dbgp.gadget->dev, "setup complete: %d, %d/%d\n", + req->status, req->actual, req->length); +} + +static int dbgp_setup(struct usb_gadget *gadget, + const struct usb_ctrlrequest *ctrl) +{ + struct usb_request *req = dbgp.req; + u8 request = ctrl->bRequest; + u16 value = le16_to_cpu(ctrl->wValue); + u16 length = le16_to_cpu(ctrl->wLength); + int err = -EOPNOTSUPP; + void *data = NULL; + u16 len = 0; + + if (length > DBGP_REQ_LEN) { + if (ctrl->bRequestType & USB_DIR_IN) { + /* Cast away the const, we are going to overwrite on purpose. */ + __le16 *temp = (__le16 *)&ctrl->wLength; + + *temp = cpu_to_le16(DBGP_REQ_LEN); + length = DBGP_REQ_LEN; + } else { + return err; + } + } + + + if (request == USB_REQ_GET_DESCRIPTOR) { + switch (value>>8) { + case USB_DT_DEVICE: + dev_dbg(&dbgp.gadget->dev, "setup: desc device\n"); + len = sizeof device_desc; + data = &device_desc; + device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket; + break; + case USB_DT_DEBUG: + dev_dbg(&dbgp.gadget->dev, "setup: desc debug\n"); + len = sizeof dbg_desc; + data = &dbg_desc; + break; + default: + goto fail; + } + err = 0; + } else if (request == USB_REQ_SET_FEATURE && + value == USB_DEVICE_DEBUG_MODE) { + dev_dbg(&dbgp.gadget->dev, "setup: feat debug\n"); +#ifdef CONFIG_USB_G_DBGP_PRINTK + err = dbgp_enable_ep(); +#else + err = dbgp_configure_endpoints(gadget); + if (err < 0) { + goto fail; + } + err = gserial_connect(dbgp.serial, tty_line); +#endif + if (err < 0) + goto fail; + } else + goto fail; + + req->length = min(length, len); + req->zero = len < req->length; + if (data && req->length) + memcpy(req->buf, data, req->length); + + req->complete = dbgp_setup_complete; + return usb_ep_queue(gadget->ep0, req, GFP_ATOMIC); + +fail: + dev_dbg(&dbgp.gadget->dev, + "setup: failure req %x v %x\n", request, value); + return err; +} + +static struct usb_gadget_driver dbgp_driver = { + .function = "dbgp", + .max_speed = USB_SPEED_HIGH, + .bind = dbgp_bind, + .unbind = dbgp_unbind, + .setup = dbgp_setup, + .reset = dbgp_disconnect, + .disconnect = dbgp_disconnect, + .driver = { + .owner = THIS_MODULE, + .name = "dbgp" + }, +}; + +static int __init dbgp_init(void) +{ + return usb_gadget_register_driver(&dbgp_driver); +} + +static void __exit dbgp_exit(void) +{ + usb_gadget_unregister_driver(&dbgp_driver); +#ifdef CONFIG_USB_G_DBGP_SERIAL + gserial_free_line(tty_line); +#endif +} + +MODULE_AUTHOR("Stephane Duverger"); +MODULE_LICENSE("GPL"); +module_init(dbgp_init); +module_exit(dbgp_exit); -- cgit v1.2.3