From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/usb/host/ehci-omap.c | 304 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 304 insertions(+) create mode 100644 drivers/usb/host/ehci-omap.c (limited to 'drivers/usb/host/ehci-omap.c') diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c new file mode 100644 index 000000000..7dd984722 --- /dev/null +++ b/drivers/usb/host/ehci-omap.c @@ -0,0 +1,304 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * ehci-omap.c - driver for USBHOST on OMAP3/4 processors + * + * Bus Glue for the EHCI controllers in OMAP3/4 + * Tested on several OMAP3 boards, and OMAP4 Pandaboard + * + * Copyright (C) 2007-2013 Texas Instruments, Inc. + * Author: Vikram Pandita + * Author: Anand Gadiyar + * Author: Keshava Munegowda + * Author: Roger Quadros + * + * Copyright (C) 2009 Nokia Corporation + * Contact: Felipe Balbi + * + * Based on "ehci-fsl.c" and "ehci-au1xxx.c" ehci glue layers + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ehci.h" + +#include + +/* EHCI Register Set */ +#define EHCI_INSNREG04 (0xA0) +#define EHCI_INSNREG04_DISABLE_UNSUSPEND (1 << 5) +#define EHCI_INSNREG05_ULPI (0xA4) +#define EHCI_INSNREG05_ULPI_CONTROL_SHIFT 31 +#define EHCI_INSNREG05_ULPI_PORTSEL_SHIFT 24 +#define EHCI_INSNREG05_ULPI_OPSEL_SHIFT 22 +#define EHCI_INSNREG05_ULPI_REGADD_SHIFT 16 +#define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8 +#define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0 + +#define DRIVER_DESC "OMAP-EHCI Host Controller driver" + +static const char hcd_name[] = "ehci-omap"; + +/*-------------------------------------------------------------------------*/ + +struct omap_hcd { + struct usb_phy *phy[OMAP3_HS_USB_PORTS]; /* one PHY for each port */ + int nports; +}; + +static inline void ehci_write(void __iomem *base, u32 reg, u32 val) +{ + __raw_writel(val, base + reg); +} + +/* configure so an HC device and id are always provided */ +/* always called with process context; sleeping is OK */ + +static struct hc_driver __read_mostly ehci_omap_hc_driver; + +static const struct ehci_driver_overrides ehci_omap_overrides __initconst = { + .extra_priv_size = sizeof(struct omap_hcd), +}; + +/** + * ehci_hcd_omap_probe - initialize TI-based HCDs + * @pdev: Pointer to this platform device's information + * + * Allocates basic resources for this USB host controller, and + * then invokes the start() method for the HCD associated with it + * through the hotplug entry's driver_data. + */ +static int ehci_hcd_omap_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct usbhs_omap_platform_data *pdata = dev_get_platdata(dev); + struct resource *res; + struct usb_hcd *hcd; + void __iomem *regs; + int ret; + int irq; + int i; + struct omap_hcd *omap; + + if (usb_disabled()) + return -ENODEV; + + if (!dev->parent) { + dev_err(dev, "Missing parent device\n"); + return -ENODEV; + } + + /* For DT boot, get platform data from parent. i.e. usbhshost */ + if (dev->of_node) { + pdata = dev_get_platdata(dev->parent); + dev->platform_data = pdata; + } + + if (!pdata) { + dev_err(dev, "Missing platform data\n"); + return -ENODEV; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + regs = devm_ioremap_resource(dev, res); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + /* + * Right now device-tree probed devices don't get dma_mask set. + * Since shared usb code relies on it, set it here for now. + * Once we have dma capability bindings this can go away. + */ + ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32)); + if (ret) + return ret; + + ret = -ENODEV; + hcd = usb_create_hcd(&ehci_omap_hc_driver, dev, + dev_name(dev)); + if (!hcd) { + dev_err(dev, "Failed to create HCD\n"); + return -ENOMEM; + } + + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + hcd->regs = regs; + hcd_to_ehci(hcd)->caps = regs; + + omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv; + omap->nports = pdata->nports; + + platform_set_drvdata(pdev, hcd); + + /* get the PHY devices if needed */ + for (i = 0 ; i < omap->nports ; i++) { + struct usb_phy *phy; + + /* get the PHY device */ + phy = devm_usb_get_phy_by_phandle(dev, "phys", i); + if (IS_ERR(phy)) { + ret = PTR_ERR(phy); + if (ret == -ENODEV) { /* no PHY */ + phy = NULL; + continue; + } + + if (ret != -EPROBE_DEFER) + dev_err(dev, "Can't get PHY for port %d: %d\n", + i, ret); + goto err_phy; + } + + omap->phy[i] = phy; + + if (pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_PHY) { + usb_phy_init(omap->phy[i]); + /* bring PHY out of suspend */ + usb_phy_set_suspend(omap->phy[i], 0); + } + } + + pm_runtime_enable(dev); + pm_runtime_get_sync(dev); + + /* + * An undocumented "feature" in the OMAP3 EHCI controller, + * causes suspended ports to be taken out of suspend when + * the USBCMD.Run/Stop bit is cleared (for example when + * we do ehci_bus_suspend). + * This breaks suspend-resume if the root-hub is allowed + * to suspend. Writing 1 to this undocumented register bit + * disables this feature and restores normal behavior. + */ + ehci_write(regs, EHCI_INSNREG04, + EHCI_INSNREG04_DISABLE_UNSUSPEND); + + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (ret) { + dev_err(dev, "failed to add hcd with err %d\n", ret); + goto err_pm_runtime; + } + device_wakeup_enable(hcd->self.controller); + + /* + * Bring PHYs out of reset for non PHY modes. + * Even though HSIC mode is a PHY-less mode, the reset + * line exists between the chips and can be modelled + * as a PHY device for reset control. + */ + for (i = 0; i < omap->nports; i++) { + if (!omap->phy[i] || + pdata->port_mode[i] == OMAP_EHCI_PORT_MODE_PHY) + continue; + + usb_phy_init(omap->phy[i]); + /* bring PHY out of suspend */ + usb_phy_set_suspend(omap->phy[i], 0); + } + + return 0; + +err_pm_runtime: + pm_runtime_put_sync(dev); + pm_runtime_disable(dev); + +err_phy: + for (i = 0; i < omap->nports; i++) { + if (omap->phy[i]) + usb_phy_shutdown(omap->phy[i]); + } + + usb_put_hcd(hcd); + + return ret; +} + + +/** + * ehci_hcd_omap_remove - shutdown processing for EHCI HCDs + * @pdev: USB Host Controller being removed + * + * Reverses the effect of usb_ehci_hcd_omap_probe(), first invoking + * the HCD's stop() method. It is always called from a thread + * context, normally "rmmod", "apmd", or something similar. + */ +static int ehci_hcd_omap_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct omap_hcd *omap = (struct omap_hcd *)hcd_to_ehci(hcd)->priv; + int i; + + usb_remove_hcd(hcd); + + for (i = 0; i < omap->nports; i++) { + if (omap->phy[i]) + usb_phy_shutdown(omap->phy[i]); + } + + usb_put_hcd(hcd); + pm_runtime_put_sync(dev); + pm_runtime_disable(dev); + + return 0; +} + +static const struct of_device_id omap_ehci_dt_ids[] = { + { .compatible = "ti,ehci-omap" }, + { } +}; + +MODULE_DEVICE_TABLE(of, omap_ehci_dt_ids); + +static struct platform_driver ehci_hcd_omap_driver = { + .probe = ehci_hcd_omap_probe, + .remove = ehci_hcd_omap_remove, + .shutdown = usb_hcd_platform_shutdown, + /*.suspend = ehci_hcd_omap_suspend, */ + /*.resume = ehci_hcd_omap_resume, */ + .driver = { + .name = hcd_name, + .of_match_table = omap_ehci_dt_ids, + } +}; + +/*-------------------------------------------------------------------------*/ + +static int __init ehci_omap_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + ehci_init_driver(&ehci_omap_hc_driver, &ehci_omap_overrides); + return platform_driver_register(&ehci_hcd_omap_driver); +} +module_init(ehci_omap_init); + +static void __exit ehci_omap_cleanup(void) +{ + platform_driver_unregister(&ehci_hcd_omap_driver); +} +module_exit(ehci_omap_cleanup); + +MODULE_ALIAS("platform:ehci-omap"); +MODULE_AUTHOR("Texas Instruments, Inc."); +MODULE_AUTHOR("Felipe Balbi "); +MODULE_AUTHOR("Roger Quadros "); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); -- cgit v1.2.3