From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/usb/host/ehci-timer.c | 426 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 426 insertions(+) create mode 100644 drivers/usb/host/ehci-timer.c (limited to 'drivers/usb/host/ehci-timer.c') diff --git a/drivers/usb/host/ehci-timer.c b/drivers/usb/host/ehci-timer.c new file mode 100644 index 000000000..a79c8ac0a --- /dev/null +++ b/drivers/usb/host/ehci-timer.c @@ -0,0 +1,426 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2012 by Alan Stern + */ + +/* This file is part of ehci-hcd.c */ + +/*-------------------------------------------------------------------------*/ + +/* Set a bit in the USBCMD register */ +static void ehci_set_command_bit(struct ehci_hcd *ehci, u32 bit) +{ + ehci->command |= bit; + ehci_writel(ehci, ehci->command, &ehci->regs->command); + + /* unblock posted write */ + ehci_readl(ehci, &ehci->regs->command); +} + +/* Clear a bit in the USBCMD register */ +static void ehci_clear_command_bit(struct ehci_hcd *ehci, u32 bit) +{ + ehci->command &= ~bit; + ehci_writel(ehci, ehci->command, &ehci->regs->command); + + /* unblock posted write */ + ehci_readl(ehci, &ehci->regs->command); +} + +/*-------------------------------------------------------------------------*/ + +/* + * EHCI timer support... Now using hrtimers. + * + * Lots of different events are triggered from ehci->hrtimer. Whenever + * the timer routine runs, it checks each possible event; events that are + * currently enabled and whose expiration time has passed get handled. + * The set of enabled events is stored as a collection of bitflags in + * ehci->enabled_hrtimer_events, and they are numbered in order of + * increasing delay values (ranging between 1 ms and 100 ms). + * + * Rather than implementing a sorted list or tree of all pending events, + * we keep track only of the lowest-numbered pending event, in + * ehci->next_hrtimer_event. Whenever ehci->hrtimer gets restarted, its + * expiration time is set to the timeout value for this event. + * + * As a result, events might not get handled right away; the actual delay + * could be anywhere up to twice the requested delay. This doesn't + * matter, because none of the events are especially time-critical. The + * ones that matter most all have a delay of 1 ms, so they will be + * handled after 2 ms at most, which is okay. In addition to this, we + * allow for an expiration range of 1 ms. + */ + +/* + * Delay lengths for the hrtimer event types. + * Keep this list sorted by delay length, in the same order as + * the event types indexed by enum ehci_hrtimer_event in ehci.h. + */ +static unsigned event_delays_ns[] = { + 1 * NSEC_PER_MSEC, /* EHCI_HRTIMER_POLL_ASS */ + 1 * NSEC_PER_MSEC, /* EHCI_HRTIMER_POLL_PSS */ + 1 * NSEC_PER_MSEC, /* EHCI_HRTIMER_POLL_DEAD */ + 1125 * NSEC_PER_USEC, /* EHCI_HRTIMER_UNLINK_INTR */ + 2 * NSEC_PER_MSEC, /* EHCI_HRTIMER_FREE_ITDS */ + 2 * NSEC_PER_MSEC, /* EHCI_HRTIMER_ACTIVE_UNLINK */ + 5 * NSEC_PER_MSEC, /* EHCI_HRTIMER_START_UNLINK_INTR */ + 6 * NSEC_PER_MSEC, /* EHCI_HRTIMER_ASYNC_UNLINKS */ + 10 * NSEC_PER_MSEC, /* EHCI_HRTIMER_IAA_WATCHDOG */ + 10 * NSEC_PER_MSEC, /* EHCI_HRTIMER_DISABLE_PERIODIC */ + 15 * NSEC_PER_MSEC, /* EHCI_HRTIMER_DISABLE_ASYNC */ + 100 * NSEC_PER_MSEC, /* EHCI_HRTIMER_IO_WATCHDOG */ +}; + +/* Enable a pending hrtimer event */ +static void ehci_enable_event(struct ehci_hcd *ehci, unsigned event, + bool resched) +{ + ktime_t *timeout = &ehci->hr_timeouts[event]; + + if (resched) + *timeout = ktime_add(ktime_get(), event_delays_ns[event]); + ehci->enabled_hrtimer_events |= (1 << event); + + /* Track only the lowest-numbered pending event */ + if (event < ehci->next_hrtimer_event) { + ehci->next_hrtimer_event = event; + hrtimer_start_range_ns(&ehci->hrtimer, *timeout, + NSEC_PER_MSEC, HRTIMER_MODE_ABS); + } +} + + +/* Poll the STS_ASS status bit; see when it agrees with CMD_ASE */ +static void ehci_poll_ASS(struct ehci_hcd *ehci) +{ + unsigned actual, want; + + /* Don't enable anything if the controller isn't running (e.g., died) */ + if (ehci->rh_state != EHCI_RH_RUNNING) + return; + + want = (ehci->command & CMD_ASE) ? STS_ASS : 0; + actual = ehci_readl(ehci, &ehci->regs->status) & STS_ASS; + + if (want != actual) { + + /* Poll again later, but give up after about 2-4 ms */ + if (ehci->ASS_poll_count++ < 2) { + ehci_enable_event(ehci, EHCI_HRTIMER_POLL_ASS, true); + return; + } + ehci_dbg(ehci, "Waited too long for the async schedule status (%x/%x), giving up\n", + want, actual); + } + ehci->ASS_poll_count = 0; + + /* The status is up-to-date; restart or stop the schedule as needed */ + if (want == 0) { /* Stopped */ + if (ehci->async_count > 0) + ehci_set_command_bit(ehci, CMD_ASE); + + } else { /* Running */ + if (ehci->async_count == 0) { + + /* Turn off the schedule after a while */ + ehci_enable_event(ehci, EHCI_HRTIMER_DISABLE_ASYNC, + true); + } + } +} + +/* Turn off the async schedule after a brief delay */ +static void ehci_disable_ASE(struct ehci_hcd *ehci) +{ + ehci_clear_command_bit(ehci, CMD_ASE); +} + + +/* Poll the STS_PSS status bit; see when it agrees with CMD_PSE */ +static void ehci_poll_PSS(struct ehci_hcd *ehci) +{ + unsigned actual, want; + + /* Don't do anything if the controller isn't running (e.g., died) */ + if (ehci->rh_state != EHCI_RH_RUNNING) + return; + + want = (ehci->command & CMD_PSE) ? STS_PSS : 0; + actual = ehci_readl(ehci, &ehci->regs->status) & STS_PSS; + + if (want != actual) { + + /* Poll again later, but give up after about 2-4 ms */ + if (ehci->PSS_poll_count++ < 2) { + ehci_enable_event(ehci, EHCI_HRTIMER_POLL_PSS, true); + return; + } + ehci_dbg(ehci, "Waited too long for the periodic schedule status (%x/%x), giving up\n", + want, actual); + } + ehci->PSS_poll_count = 0; + + /* The status is up-to-date; restart or stop the schedule as needed */ + if (want == 0) { /* Stopped */ + if (ehci->periodic_count > 0) + ehci_set_command_bit(ehci, CMD_PSE); + + } else { /* Running */ + if (ehci->periodic_count == 0) { + + /* Turn off the schedule after a while */ + ehci_enable_event(ehci, EHCI_HRTIMER_DISABLE_PERIODIC, + true); + } + } +} + +/* Turn off the periodic schedule after a brief delay */ +static void ehci_disable_PSE(struct ehci_hcd *ehci) +{ + ehci_clear_command_bit(ehci, CMD_PSE); +} + + +/* Poll the STS_HALT status bit; see when a dead controller stops */ +static void ehci_handle_controller_death(struct ehci_hcd *ehci) +{ + if (!(ehci_readl(ehci, &ehci->regs->status) & STS_HALT)) { + + /* Give up after a few milliseconds */ + if (ehci->died_poll_count++ < 5) { + /* Try again later */ + ehci_enable_event(ehci, EHCI_HRTIMER_POLL_DEAD, true); + return; + } + ehci_warn(ehci, "Waited too long for the controller to stop, giving up\n"); + } + + /* Clean up the mess */ + ehci->rh_state = EHCI_RH_HALTED; + ehci_writel(ehci, 0, &ehci->regs->configured_flag); + ehci_writel(ehci, 0, &ehci->regs->intr_enable); + ehci_work(ehci); + end_unlink_async(ehci); + + /* Not in process context, so don't try to reset the controller */ +} + +/* start to unlink interrupt QHs */ +static void ehci_handle_start_intr_unlinks(struct ehci_hcd *ehci) +{ + bool stopped = (ehci->rh_state < EHCI_RH_RUNNING); + + /* + * Process all the QHs on the intr_unlink list that were added + * before the current unlink cycle began. The list is in + * temporal order, so stop when we reach the first entry in the + * current cycle. But if the root hub isn't running then + * process all the QHs on the list. + */ + while (!list_empty(&ehci->intr_unlink_wait)) { + struct ehci_qh *qh; + + qh = list_first_entry(&ehci->intr_unlink_wait, + struct ehci_qh, unlink_node); + if (!stopped && (qh->unlink_cycle == + ehci->intr_unlink_wait_cycle)) + break; + list_del_init(&qh->unlink_node); + qh->unlink_reason |= QH_UNLINK_QUEUE_EMPTY; + start_unlink_intr(ehci, qh); + } + + /* Handle remaining entries later */ + if (!list_empty(&ehci->intr_unlink_wait)) { + ehci_enable_event(ehci, EHCI_HRTIMER_START_UNLINK_INTR, true); + ++ehci->intr_unlink_wait_cycle; + } +} + +/* Handle unlinked interrupt QHs once they are gone from the hardware */ +static void ehci_handle_intr_unlinks(struct ehci_hcd *ehci) +{ + bool stopped = (ehci->rh_state < EHCI_RH_RUNNING); + + /* + * Process all the QHs on the intr_unlink list that were added + * before the current unlink cycle began. The list is in + * temporal order, so stop when we reach the first entry in the + * current cycle. But if the root hub isn't running then + * process all the QHs on the list. + */ + ehci->intr_unlinking = true; + while (!list_empty(&ehci->intr_unlink)) { + struct ehci_qh *qh; + + qh = list_first_entry(&ehci->intr_unlink, struct ehci_qh, + unlink_node); + if (!stopped && qh->unlink_cycle == ehci->intr_unlink_cycle) + break; + list_del_init(&qh->unlink_node); + end_unlink_intr(ehci, qh); + } + + /* Handle remaining entries later */ + if (!list_empty(&ehci->intr_unlink)) { + ehci_enable_event(ehci, EHCI_HRTIMER_UNLINK_INTR, true); + ++ehci->intr_unlink_cycle; + } + ehci->intr_unlinking = false; +} + + +/* Start another free-iTDs/siTDs cycle */ +static void start_free_itds(struct ehci_hcd *ehci) +{ + if (!(ehci->enabled_hrtimer_events & BIT(EHCI_HRTIMER_FREE_ITDS))) { + ehci->last_itd_to_free = list_entry( + ehci->cached_itd_list.prev, + struct ehci_itd, itd_list); + ehci->last_sitd_to_free = list_entry( + ehci->cached_sitd_list.prev, + struct ehci_sitd, sitd_list); + ehci_enable_event(ehci, EHCI_HRTIMER_FREE_ITDS, true); + } +} + +/* Wait for controller to stop using old iTDs and siTDs */ +static void end_free_itds(struct ehci_hcd *ehci) +{ + struct ehci_itd *itd, *n; + struct ehci_sitd *sitd, *sn; + + if (ehci->rh_state < EHCI_RH_RUNNING) { + ehci->last_itd_to_free = NULL; + ehci->last_sitd_to_free = NULL; + } + + list_for_each_entry_safe(itd, n, &ehci->cached_itd_list, itd_list) { + list_del(&itd->itd_list); + dma_pool_free(ehci->itd_pool, itd, itd->itd_dma); + if (itd == ehci->last_itd_to_free) + break; + } + list_for_each_entry_safe(sitd, sn, &ehci->cached_sitd_list, sitd_list) { + list_del(&sitd->sitd_list); + dma_pool_free(ehci->sitd_pool, sitd, sitd->sitd_dma); + if (sitd == ehci->last_sitd_to_free) + break; + } + + if (!list_empty(&ehci->cached_itd_list) || + !list_empty(&ehci->cached_sitd_list)) + start_free_itds(ehci); +} + + +/* Handle lost (or very late) IAA interrupts */ +static void ehci_iaa_watchdog(struct ehci_hcd *ehci) +{ + u32 cmd, status; + + /* + * Lost IAA irqs wedge things badly; seen first with a vt8235. + * So we need this watchdog, but must protect it against both + * (a) SMP races against real IAA firing and retriggering, and + * (b) clean HC shutdown, when IAA watchdog was pending. + */ + if (!ehci->iaa_in_progress || ehci->rh_state != EHCI_RH_RUNNING) + return; + + /* If we get here, IAA is *REALLY* late. It's barely + * conceivable that the system is so busy that CMD_IAAD + * is still legitimately set, so let's be sure it's + * clear before we read STS_IAA. (The HC should clear + * CMD_IAAD when it sets STS_IAA.) + */ + cmd = ehci_readl(ehci, &ehci->regs->command); + + /* + * If IAA is set here it either legitimately triggered + * after the watchdog timer expired (_way_ late, so we'll + * still count it as lost) ... or a silicon erratum: + * - VIA seems to set IAA without triggering the IRQ; + * - IAAD potentially cleared without setting IAA. + */ + status = ehci_readl(ehci, &ehci->regs->status); + if ((status & STS_IAA) || !(cmd & CMD_IAAD)) { + INCR(ehci->stats.lost_iaa); + ehci_writel(ehci, STS_IAA, &ehci->regs->status); + } + + ehci_dbg(ehci, "IAA watchdog: status %x cmd %x\n", status, cmd); + end_iaa_cycle(ehci); +} + + +/* Enable the I/O watchdog, if appropriate */ +static void turn_on_io_watchdog(struct ehci_hcd *ehci) +{ + /* Not needed if the controller isn't running or it's already enabled */ + if (ehci->rh_state != EHCI_RH_RUNNING || + (ehci->enabled_hrtimer_events & + BIT(EHCI_HRTIMER_IO_WATCHDOG))) + return; + + /* + * Isochronous transfers always need the watchdog. + * For other sorts we use it only if the flag is set. + */ + if (ehci->isoc_count > 0 || (ehci->need_io_watchdog && + ehci->async_count + ehci->intr_count > 0)) + ehci_enable_event(ehci, EHCI_HRTIMER_IO_WATCHDOG, true); +} + + +/* + * Handler functions for the hrtimer event types. + * Keep this array in the same order as the event types indexed by + * enum ehci_hrtimer_event in ehci.h. + */ +static void (*event_handlers[])(struct ehci_hcd *) = { + ehci_poll_ASS, /* EHCI_HRTIMER_POLL_ASS */ + ehci_poll_PSS, /* EHCI_HRTIMER_POLL_PSS */ + ehci_handle_controller_death, /* EHCI_HRTIMER_POLL_DEAD */ + ehci_handle_intr_unlinks, /* EHCI_HRTIMER_UNLINK_INTR */ + end_free_itds, /* EHCI_HRTIMER_FREE_ITDS */ + end_unlink_async, /* EHCI_HRTIMER_ACTIVE_UNLINK */ + ehci_handle_start_intr_unlinks, /* EHCI_HRTIMER_START_UNLINK_INTR */ + unlink_empty_async, /* EHCI_HRTIMER_ASYNC_UNLINKS */ + ehci_iaa_watchdog, /* EHCI_HRTIMER_IAA_WATCHDOG */ + ehci_disable_PSE, /* EHCI_HRTIMER_DISABLE_PERIODIC */ + ehci_disable_ASE, /* EHCI_HRTIMER_DISABLE_ASYNC */ + ehci_work, /* EHCI_HRTIMER_IO_WATCHDOG */ +}; + +static enum hrtimer_restart ehci_hrtimer_func(struct hrtimer *t) +{ + struct ehci_hcd *ehci = container_of(t, struct ehci_hcd, hrtimer); + ktime_t now; + unsigned long events; + unsigned long flags; + unsigned e; + + spin_lock_irqsave(&ehci->lock, flags); + + events = ehci->enabled_hrtimer_events; + ehci->enabled_hrtimer_events = 0; + ehci->next_hrtimer_event = EHCI_HRTIMER_NO_EVENT; + + /* + * Check each pending event. If its time has expired, handle + * the event; otherwise re-enable it. + */ + now = ktime_get(); + for_each_set_bit(e, &events, EHCI_HRTIMER_NUM_EVENTS) { + if (ktime_compare(now, ehci->hr_timeouts[e]) >= 0) + event_handlers[e](ehci); + else + ehci_enable_event(ehci, e, false); + } + + spin_unlock_irqrestore(&ehci->lock, flags); + return HRTIMER_NORESTART; +} -- cgit v1.2.3