From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/usb/host/ohci-da8xx.c | 582 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 582 insertions(+) create mode 100644 drivers/usb/host/ohci-da8xx.c (limited to 'drivers/usb/host/ohci-da8xx.c') diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c new file mode 100644 index 000000000..d4818e8d6 --- /dev/null +++ b/drivers/usb/host/ohci-da8xx.c @@ -0,0 +1,582 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * OHCI HCD (Host Controller Driver) for USB. + * + * TI DA8xx (OMAP-L1x) Bus Glue + * + * Derived from: ohci-omap.c and ohci-s3c2410.c + * Copyright (C) 2008-2009 MontaVista Software, Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ohci.h" + +#define DRIVER_DESC "DA8XX" +#define DRV_NAME "ohci-da8xx" + +static struct hc_driver __read_mostly ohci_da8xx_hc_driver; + +static int (*orig_ohci_hub_control)(struct usb_hcd *hcd, u16 typeReq, + u16 wValue, u16 wIndex, char *buf, u16 wLength); +static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf); + +struct da8xx_ohci_hcd { + struct usb_hcd *hcd; + struct clk *usb11_clk; + struct phy *usb11_phy; + struct regulator *vbus_reg; + struct notifier_block nb; + struct gpio_desc *oc_gpio; +}; + +#define to_da8xx_ohci(hcd) (struct da8xx_ohci_hcd *)(hcd_to_ohci(hcd)->priv) + +/* Over-current indicator change bitmask */ +static volatile u16 ocic_mask; + +static int ohci_da8xx_enable(struct usb_hcd *hcd) +{ + struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); + int ret; + + ret = clk_prepare_enable(da8xx_ohci->usb11_clk); + if (ret) + return ret; + + ret = phy_init(da8xx_ohci->usb11_phy); + if (ret) + goto err_phy_init; + + ret = phy_power_on(da8xx_ohci->usb11_phy); + if (ret) + goto err_phy_power_on; + + return 0; + +err_phy_power_on: + phy_exit(da8xx_ohci->usb11_phy); +err_phy_init: + clk_disable_unprepare(da8xx_ohci->usb11_clk); + + return ret; +} + +static void ohci_da8xx_disable(struct usb_hcd *hcd) +{ + struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); + + phy_power_off(da8xx_ohci->usb11_phy); + phy_exit(da8xx_ohci->usb11_phy); + clk_disable_unprepare(da8xx_ohci->usb11_clk); +} + +static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on) +{ + struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); + struct device *dev = hcd->self.controller; + int ret; + + if (!da8xx_ohci->vbus_reg) + return 0; + + if (on) { + ret = regulator_enable(da8xx_ohci->vbus_reg); + if (ret) { + dev_err(dev, "Failed to enable regulator: %d\n", ret); + return ret; + } + } else { + ret = regulator_disable(da8xx_ohci->vbus_reg); + if (ret) { + dev_err(dev, "Failed to disable regulator: %d\n", ret); + return ret; + } + } + + return 0; +} + +static int ohci_da8xx_get_power(struct usb_hcd *hcd) +{ + struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); + + if (da8xx_ohci->vbus_reg) + return regulator_is_enabled(da8xx_ohci->vbus_reg); + + return 1; +} + +static int ohci_da8xx_get_oci(struct usb_hcd *hcd) +{ + struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); + unsigned int flags; + int ret; + + if (da8xx_ohci->oc_gpio) + return gpiod_get_value_cansleep(da8xx_ohci->oc_gpio); + + if (!da8xx_ohci->vbus_reg) + return 0; + + ret = regulator_get_error_flags(da8xx_ohci->vbus_reg, &flags); + if (ret) + return ret; + + if (flags & REGULATOR_ERROR_OVER_CURRENT) + return 1; + + return 0; +} + +static int ohci_da8xx_has_set_power(struct usb_hcd *hcd) +{ + struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); + + if (da8xx_ohci->vbus_reg) + return 1; + + return 0; +} + +static int ohci_da8xx_has_oci(struct usb_hcd *hcd) +{ + struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); + + if (da8xx_ohci->oc_gpio) + return 1; + + if (da8xx_ohci->vbus_reg) + return 1; + + return 0; +} + +static int ohci_da8xx_has_potpgt(struct usb_hcd *hcd) +{ + struct device *dev = hcd->self.controller; + struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); + + if (hub && hub->potpgt) + return 1; + + return 0; +} + +static int ohci_da8xx_regulator_event(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct da8xx_ohci_hcd *da8xx_ohci = + container_of(nb, struct da8xx_ohci_hcd, nb); + + if (event & REGULATOR_EVENT_OVER_CURRENT) { + ocic_mask |= 1 << 1; + ohci_da8xx_set_power(da8xx_ohci->hcd, 0); + } + + return 0; +} + +static irqreturn_t ohci_da8xx_oc_thread(int irq, void *data) +{ + struct da8xx_ohci_hcd *da8xx_ohci = data; + struct device *dev = da8xx_ohci->hcd->self.controller; + int ret; + + if (gpiod_get_value_cansleep(da8xx_ohci->oc_gpio) && + da8xx_ohci->vbus_reg) { + ret = regulator_disable(da8xx_ohci->vbus_reg); + if (ret) + dev_err(dev, "Failed to disable regulator: %d\n", ret); + } + + return IRQ_HANDLED; +} + +static int ohci_da8xx_register_notify(struct usb_hcd *hcd) +{ + struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); + struct device *dev = hcd->self.controller; + int ret = 0; + + if (!da8xx_ohci->oc_gpio && da8xx_ohci->vbus_reg) { + da8xx_ohci->nb.notifier_call = ohci_da8xx_regulator_event; + ret = devm_regulator_register_notifier(da8xx_ohci->vbus_reg, + &da8xx_ohci->nb); + } + + if (ret) + dev_err(dev, "Failed to register notifier: %d\n", ret); + + return ret; +} + +static int ohci_da8xx_reset(struct usb_hcd *hcd) +{ + struct device *dev = hcd->self.controller; + struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int result; + u32 rh_a; + + dev_dbg(dev, "starting USB controller\n"); + + result = ohci_da8xx_enable(hcd); + if (result < 0) + return result; + + /* + * DA8xx only have 1 port connected to the pins but the HC root hub + * register A reports 2 ports, thus we'll have to override it... + */ + ohci->num_ports = 1; + + result = ohci_setup(hcd); + if (result < 0) { + ohci_da8xx_disable(hcd); + return result; + } + + /* + * Since we're providing a board-specific root hub port power control + * and over-current reporting, we have to override the HC root hub A + * register's default value, so that ohci_hub_control() could return + * the correct hub descriptor... + */ + rh_a = ohci_readl(ohci, &ohci->regs->roothub.a); + if (ohci_da8xx_has_set_power(hcd)) { + rh_a &= ~RH_A_NPS; + rh_a |= RH_A_PSM; + } + if (ohci_da8xx_has_oci(hcd)) { + rh_a &= ~RH_A_NOCP; + rh_a |= RH_A_OCPM; + } + if (ohci_da8xx_has_potpgt(hcd)) { + rh_a &= ~RH_A_POTPGT; + rh_a |= hub->potpgt << 24; + } + ohci_writel(ohci, rh_a, &ohci->regs->roothub.a); + + return result; +} + +/* + * Update the status data from the hub with the over-current indicator change. + */ +static int ohci_da8xx_hub_status_data(struct usb_hcd *hcd, char *buf) +{ + int length = orig_ohci_hub_status_data(hcd, buf); + + /* See if we have OCIC bit set on port 1 */ + if (ocic_mask & (1 << 1)) { + dev_dbg(hcd->self.controller, "over-current indicator change " + "on port 1\n"); + + if (!length) + length = 1; + + buf[0] |= 1 << 1; + } + return length; +} + +/* + * Look at the control requests to the root hub and see if we need to override. + */ +static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + struct device *dev = hcd->self.controller; + int temp; + + switch (typeReq) { + case GetPortStatus: + /* Check the port number */ + if (wIndex != 1) + break; + + dev_dbg(dev, "GetPortStatus(%u)\n", wIndex); + + temp = roothub_portstatus(hcd_to_ohci(hcd), wIndex - 1); + + /* The port power status (PPS) bit defaults to 1 */ + if (!ohci_da8xx_get_power(hcd)) + temp &= ~RH_PS_PPS; + + /* The port over-current indicator (POCI) bit is always 0 */ + if (ohci_da8xx_get_oci(hcd) > 0) + temp |= RH_PS_POCI; + + /* The over-current indicator change (OCIC) bit is 0 too */ + if (ocic_mask & (1 << wIndex)) + temp |= RH_PS_OCIC; + + put_unaligned(cpu_to_le32(temp), (__le32 *)buf); + return 0; + case SetPortFeature: + temp = 1; + goto check_port; + case ClearPortFeature: + temp = 0; + +check_port: + /* Check the port number */ + if (wIndex != 1) + break; + + switch (wValue) { + case USB_PORT_FEAT_POWER: + dev_dbg(dev, "%sPortFeature(%u): %s\n", + temp ? "Set" : "Clear", wIndex, "POWER"); + + return ohci_da8xx_set_power(hcd, temp) ? -EPIPE : 0; + case USB_PORT_FEAT_C_OVER_CURRENT: + dev_dbg(dev, "%sPortFeature(%u): %s\n", + temp ? "Set" : "Clear", wIndex, + "C_OVER_CURRENT"); + + if (temp) + ocic_mask |= 1 << wIndex; + else + ocic_mask &= ~(1 << wIndex); + return 0; + } + } + + return orig_ohci_hub_control(hcd, typeReq, wValue, + wIndex, buf, wLength); +} + +/*-------------------------------------------------------------------------*/ +#ifdef CONFIG_OF +static const struct of_device_id da8xx_ohci_ids[] = { + { .compatible = "ti,da830-ohci" }, + { } +}; +MODULE_DEVICE_TABLE(of, da8xx_ohci_ids); +#endif + +static int ohci_da8xx_probe(struct platform_device *pdev) +{ + struct da8xx_ohci_hcd *da8xx_ohci; + struct device *dev = &pdev->dev; + int error, hcd_irq, oc_irq; + struct usb_hcd *hcd; + struct resource *mem; + + hcd = usb_create_hcd(&ohci_da8xx_hc_driver, dev, dev_name(dev)); + if (!hcd) + return -ENOMEM; + + da8xx_ohci = to_da8xx_ohci(hcd); + da8xx_ohci->hcd = hcd; + + da8xx_ohci->usb11_clk = devm_clk_get(dev, NULL); + if (IS_ERR(da8xx_ohci->usb11_clk)) { + error = PTR_ERR(da8xx_ohci->usb11_clk); + if (error != -EPROBE_DEFER) + dev_err(dev, "Failed to get clock.\n"); + goto err; + } + + da8xx_ohci->usb11_phy = devm_phy_get(dev, "usb-phy"); + if (IS_ERR(da8xx_ohci->usb11_phy)) { + error = PTR_ERR(da8xx_ohci->usb11_phy); + if (error != -EPROBE_DEFER) + dev_err(dev, "Failed to get phy.\n"); + goto err; + } + + da8xx_ohci->vbus_reg = devm_regulator_get_optional(dev, "vbus"); + if (IS_ERR(da8xx_ohci->vbus_reg)) { + error = PTR_ERR(da8xx_ohci->vbus_reg); + if (error == -ENODEV) { + da8xx_ohci->vbus_reg = NULL; + } else if (error == -EPROBE_DEFER) { + goto err; + } else { + dev_err(dev, "Failed to get regulator\n"); + goto err; + } + } + + da8xx_ohci->oc_gpio = devm_gpiod_get_optional(dev, "oc", GPIOD_IN); + if (IS_ERR(da8xx_ohci->oc_gpio)) { + error = PTR_ERR(da8xx_ohci->oc_gpio); + goto err; + } + + if (da8xx_ohci->oc_gpio) { + oc_irq = gpiod_to_irq(da8xx_ohci->oc_gpio); + if (oc_irq < 0) { + error = oc_irq; + goto err; + } + + error = devm_request_threaded_irq(dev, oc_irq, NULL, + ohci_da8xx_oc_thread, IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "OHCI over-current indicator", da8xx_ohci); + if (error) + goto err; + } + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + hcd->regs = devm_ioremap_resource(dev, mem); + if (IS_ERR(hcd->regs)) { + error = PTR_ERR(hcd->regs); + goto err; + } + hcd->rsrc_start = mem->start; + hcd->rsrc_len = resource_size(mem); + + hcd_irq = platform_get_irq(pdev, 0); + if (hcd_irq < 0) { + error = -ENODEV; + goto err; + } + + error = usb_add_hcd(hcd, hcd_irq, 0); + if (error) + goto err; + + device_wakeup_enable(hcd->self.controller); + + error = ohci_da8xx_register_notify(hcd); + if (error) + goto err_remove_hcd; + + return 0; + +err_remove_hcd: + usb_remove_hcd(hcd); +err: + usb_put_hcd(hcd); + return error; +} + +static int ohci_da8xx_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + + usb_remove_hcd(hcd); + usb_put_hcd(hcd); + + return 0; +} + +#ifdef CONFIG_PM +static int ohci_da8xx_suspend(struct platform_device *pdev, + pm_message_t message) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + bool do_wakeup = device_may_wakeup(&pdev->dev); + int ret; + + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + + ret = ohci_suspend(hcd, do_wakeup); + if (ret) + return ret; + + ohci_da8xx_disable(hcd); + hcd->state = HC_STATE_SUSPENDED; + + return ret; +} + +static int ohci_da8xx_resume(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int ret; + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + + ret = ohci_da8xx_enable(hcd); + if (ret) + return ret; + + ohci_resume(hcd, false); + + return 0; +} +#endif + +static const struct ohci_driver_overrides da8xx_overrides __initconst = { + .reset = ohci_da8xx_reset, + .extra_priv_size = sizeof(struct da8xx_ohci_hcd), +}; + +/* + * Driver definition to register with platform structure. + */ +static struct platform_driver ohci_hcd_da8xx_driver = { + .probe = ohci_da8xx_probe, + .remove = ohci_da8xx_remove, + .shutdown = usb_hcd_platform_shutdown, +#ifdef CONFIG_PM + .suspend = ohci_da8xx_suspend, + .resume = ohci_da8xx_resume, +#endif + .driver = { + .name = DRV_NAME, + .of_match_table = of_match_ptr(da8xx_ohci_ids), + }, +}; + +static int __init ohci_da8xx_init(void) +{ + + if (usb_disabled()) + return -ENODEV; + + ohci_init_driver(&ohci_da8xx_hc_driver, &da8xx_overrides); + + /* + * The Davinci da8xx HW has some unusual quirks, which require + * da8xx-specific workarounds. We override certain hc_driver + * functions here to achieve that. We explicitly do not enhance + * ohci_driver_overrides to allow this more easily, since this + * is an unusual case, and we don't want to encourage others to + * override these functions by making it too easy. + */ + + orig_ohci_hub_control = ohci_da8xx_hc_driver.hub_control; + orig_ohci_hub_status_data = ohci_da8xx_hc_driver.hub_status_data; + + ohci_da8xx_hc_driver.hub_status_data = ohci_da8xx_hub_status_data; + ohci_da8xx_hc_driver.hub_control = ohci_da8xx_hub_control; + + return platform_driver_register(&ohci_hcd_da8xx_driver); +} +module_init(ohci_da8xx_init); + +static void __exit ohci_da8xx_exit(void) +{ + platform_driver_unregister(&ohci_hcd_da8xx_driver); +} +module_exit(ohci_da8xx_exit); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); -- cgit v1.2.3