From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/usb/host/xhci-mtk.h | 179 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 179 insertions(+) create mode 100644 drivers/usb/host/xhci-mtk.h (limited to 'drivers/usb/host/xhci-mtk.h') diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h new file mode 100644 index 000000000..1174a510d --- /dev/null +++ b/drivers/usb/host/xhci-mtk.h @@ -0,0 +1,179 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2015 MediaTek Inc. + * Author: + * Zhigang.Wei + * Chunfeng.Yun + */ + +#ifndef _XHCI_MTK_H_ +#define _XHCI_MTK_H_ + +#include +#include +#include + +#include "xhci.h" + +#define BULK_CLKS_NUM 5 +#define BULK_VREGS_NUM 2 + +/* support at most 64 ep, use 32 size hash table */ +#define SCH_EP_HASH_BITS 5 + +/** + * To simplify scheduler algorithm, set a upper limit for ESIT, + * if a synchromous ep's ESIT is larger than @XHCI_MTK_MAX_ESIT, + * round down to the limit value, that means allocating more + * bandwidth to it. + */ +#define XHCI_MTK_MAX_ESIT (1 << 6) +#define XHCI_MTK_BW_INDEX(x) ((x) & (XHCI_MTK_MAX_ESIT - 1)) + +/** + * @fs_bus_bw: array to keep track of bandwidth already used for FS + * @ep_list: Endpoints using this TT + */ +struct mu3h_sch_tt { + u32 fs_bus_bw[XHCI_MTK_MAX_ESIT]; + struct list_head ep_list; +}; + +/** + * struct mu3h_sch_bw_info: schedule information for bandwidth domain + * + * @bus_bw: array to keep track of bandwidth already used at each uframes + * + * treat a HS root port as a bandwidth domain, but treat a SS root port as + * two bandwidth domains, one for IN eps and another for OUT eps. + */ +struct mu3h_sch_bw_info { + u32 bus_bw[XHCI_MTK_MAX_ESIT]; +}; + +/** + * struct mu3h_sch_ep_info: schedule information for endpoint + * + * @esit: unit is 125us, equal to 2 << Interval field in ep-context + * @num_esit: number of @esit in a period + * @num_budget_microframes: number of continuous uframes + * (@repeat==1) scheduled within the interval + * @bw_cost_per_microframe: bandwidth cost per microframe + * @hentry: hash table entry + * @endpoint: linked into bandwidth domain which it belongs to + * @tt_endpoint: linked into mu3h_sch_tt's list which it belongs to + * @bw_info: bandwidth domain which this endpoint belongs + * @sch_tt: mu3h_sch_tt linked into + * @ep_type: endpoint type + * @maxpkt: max packet size of endpoint + * @ep: address of usb_host_endpoint struct + * @allocated: the bandwidth is aready allocated from bus_bw + * @offset: which uframe of the interval that transfer should be + * scheduled first time within the interval + * @repeat: the time gap between two uframes that transfers are + * scheduled within a interval. in the simple algorithm, only + * assign 0 or 1 to it; 0 means using only one uframe in a + * interval, and 1 means using @num_budget_microframes + * continuous uframes + * @pkts: number of packets to be transferred in the scheduled uframes + * @cs_count: number of CS that host will trigger + * @burst_mode: burst mode for scheduling. 0: normal burst mode, + * distribute the bMaxBurst+1 packets for a single burst + * according to @pkts and @repeat, repeate the burst multiple + * times; 1: distribute the (bMaxBurst+1)*(Mult+1) packets + * according to @pkts and @repeat. normal mode is used by + * default + */ +struct mu3h_sch_ep_info { + u32 esit; + u32 num_esit; + u32 num_budget_microframes; + u32 bw_cost_per_microframe; + struct list_head endpoint; + struct hlist_node hentry; + struct list_head tt_endpoint; + struct mu3h_sch_bw_info *bw_info; + struct mu3h_sch_tt *sch_tt; + u32 ep_type; + u32 maxpkt; + struct usb_host_endpoint *ep; + enum usb_device_speed speed; + bool allocated; + /* + * mtk xHCI scheduling information put into reserved DWs + * in ep context + */ + u32 offset; + u32 repeat; + u32 pkts; + u32 cs_count; + u32 burst_mode; +}; + +#define MU3C_U3_PORT_MAX 4 +#define MU3C_U2_PORT_MAX 5 + +/** + * struct mu3c_ippc_regs: MTK ssusb ip port control registers + * @ip_pw_ctr0~3: ip power and clock control registers + * @ip_pw_sts1~2: ip power and clock status registers + * @ip_xhci_cap: ip xHCI capability register + * @u3_ctrl_p[x]: ip usb3 port x control register, only low 4bytes are used + * @u2_ctrl_p[x]: ip usb2 port x control register, only low 4bytes are used + * @u2_phy_pll: usb2 phy pll control register + */ +struct mu3c_ippc_regs { + __le32 ip_pw_ctr0; + __le32 ip_pw_ctr1; + __le32 ip_pw_ctr2; + __le32 ip_pw_ctr3; + __le32 ip_pw_sts1; + __le32 ip_pw_sts2; + __le32 reserved0[3]; + __le32 ip_xhci_cap; + __le32 reserved1[2]; + __le64 u3_ctrl_p[MU3C_U3_PORT_MAX]; + __le64 u2_ctrl_p[MU3C_U2_PORT_MAX]; + __le32 reserved2; + __le32 u2_phy_pll; + __le32 reserved3[33]; /* 0x80 ~ 0xff */ +}; + +struct xhci_hcd_mtk { + struct device *dev; + struct usb_hcd *hcd; + struct mu3h_sch_bw_info *sch_array; + struct list_head bw_ep_chk_list; + DECLARE_HASHTABLE(sch_ep_hash, SCH_EP_HASH_BITS); + struct mu3c_ippc_regs __iomem *ippc_regs; + int num_u2_ports; + int num_u3_ports; + int u2p_dis_msk; + int u3p_dis_msk; + struct clk_bulk_data clks[BULK_CLKS_NUM]; + struct regulator_bulk_data supplies[BULK_VREGS_NUM]; + unsigned int has_ippc:1; + unsigned int lpm_support:1; + unsigned int u2_lpm_disable:1; + /* usb remote wakeup */ + unsigned int uwk_en:1; + struct regmap *uwk; + u32 uwk_reg_base; + u32 uwk_vers; +}; + +static inline struct xhci_hcd_mtk *hcd_to_mtk(struct usb_hcd *hcd) +{ + return dev_get_drvdata(hcd->self.controller); +} + +int xhci_mtk_sch_init(struct xhci_hcd_mtk *mtk); +void xhci_mtk_sch_exit(struct xhci_hcd_mtk *mtk); +int xhci_mtk_add_ep(struct usb_hcd *hcd, struct usb_device *udev, + struct usb_host_endpoint *ep); +int xhci_mtk_drop_ep(struct usb_hcd *hcd, struct usb_device *udev, + struct usb_host_endpoint *ep); +int xhci_mtk_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev); +void xhci_mtk_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev); + +#endif /* _XHCI_MTK_H_ */ -- cgit v1.2.3