From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/usb/host/xhci-rcar.c | 227 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 227 insertions(+) create mode 100644 drivers/usb/host/xhci-rcar.c (limited to 'drivers/usb/host/xhci-rcar.c') diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c new file mode 100644 index 000000000..aef0258a7 --- /dev/null +++ b/drivers/usb/host/xhci-rcar.c @@ -0,0 +1,227 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * xHCI host controller driver for R-Car SoCs + * + * Copyright (C) 2014 Renesas Electronics Corporation + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "xhci.h" +#include "xhci-plat.h" +#include "xhci-rcar.h" + +/* +* - The V3 firmware is for almost all R-Car Gen3 (except r8a7795 ES1.x) +* - The V2 firmware is for r8a7795 ES1.x. +* - The V2 firmware is possible to use on R-Car Gen2. However, the V2 causes +* performance degradation. So, this driver continues to use the V1 if R-Car +* Gen2. +* - The V1 firmware is impossible to use on R-Car Gen3. +*/ +MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V1); +MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V2); +MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V3); + +/*** Register Offset ***/ +#define RCAR_USB3_AXH_STA 0x104 /* AXI Host Control Status */ +#define RCAR_USB3_INT_ENA 0x224 /* Interrupt Enable */ +#define RCAR_USB3_DL_CTRL 0x250 /* FW Download Control & Status */ +#define RCAR_USB3_FW_DATA0 0x258 /* FW Data0 */ + +#define RCAR_USB3_LCLK 0xa44 /* LCLK Select */ +#define RCAR_USB3_CONF1 0xa48 /* USB3.0 Configuration1 */ +#define RCAR_USB3_CONF2 0xa5c /* USB3.0 Configuration2 */ +#define RCAR_USB3_CONF3 0xaa8 /* USB3.0 Configuration3 */ +#define RCAR_USB3_RX_POL 0xab0 /* USB3.0 RX Polarity */ +#define RCAR_USB3_TX_POL 0xab8 /* USB3.0 TX Polarity */ + +/*** Register Settings ***/ +/* AXI Host Control Status */ +#define RCAR_USB3_AXH_STA_B3_PLL_ACTIVE 0x00010000 +#define RCAR_USB3_AXH_STA_B2_PLL_ACTIVE 0x00000001 +#define RCAR_USB3_AXH_STA_PLL_ACTIVE_MASK (RCAR_USB3_AXH_STA_B3_PLL_ACTIVE | \ + RCAR_USB3_AXH_STA_B2_PLL_ACTIVE) + +/* Interrupt Enable */ +#define RCAR_USB3_INT_XHC_ENA 0x00000001 +#define RCAR_USB3_INT_PME_ENA 0x00000002 +#define RCAR_USB3_INT_HSE_ENA 0x00000004 +#define RCAR_USB3_INT_ENA_VAL (RCAR_USB3_INT_XHC_ENA | \ + RCAR_USB3_INT_PME_ENA | RCAR_USB3_INT_HSE_ENA) + +/* FW Download Control & Status */ +#define RCAR_USB3_DL_CTRL_ENABLE 0x00000001 +#define RCAR_USB3_DL_CTRL_FW_SUCCESS 0x00000010 +#define RCAR_USB3_DL_CTRL_FW_SET_DATA0 0x00000100 + +/* LCLK Select */ +#define RCAR_USB3_LCLK_ENA_VAL 0x01030001 + +/* USB3.0 Configuration */ +#define RCAR_USB3_CONF1_VAL 0x00030204 +#define RCAR_USB3_CONF2_VAL 0x00030300 +#define RCAR_USB3_CONF3_VAL 0x13802007 + +/* USB3.0 Polarity */ +#define RCAR_USB3_RX_POL_VAL BIT(21) +#define RCAR_USB3_TX_POL_VAL BIT(4) + +/* For soc_device_attribute */ +#define RCAR_XHCI_FIRMWARE_V2 BIT(0) /* FIRMWARE V2 */ +#define RCAR_XHCI_FIRMWARE_V3 BIT(1) /* FIRMWARE V3 */ + +static const struct soc_device_attribute rcar_quirks_match[] = { + { + .soc_id = "r8a7795", .revision = "ES1.*", + .data = (void *)RCAR_XHCI_FIRMWARE_V2, + }, + { /* sentinel */ } +}; + +static void xhci_rcar_start_gen2(struct usb_hcd *hcd) +{ + /* LCLK Select */ + writel(RCAR_USB3_LCLK_ENA_VAL, hcd->regs + RCAR_USB3_LCLK); + /* USB3.0 Configuration */ + writel(RCAR_USB3_CONF1_VAL, hcd->regs + RCAR_USB3_CONF1); + writel(RCAR_USB3_CONF2_VAL, hcd->regs + RCAR_USB3_CONF2); + writel(RCAR_USB3_CONF3_VAL, hcd->regs + RCAR_USB3_CONF3); + /* USB3.0 Polarity */ + writel(RCAR_USB3_RX_POL_VAL, hcd->regs + RCAR_USB3_RX_POL); + writel(RCAR_USB3_TX_POL_VAL, hcd->regs + RCAR_USB3_TX_POL); +} + +static int xhci_rcar_is_gen2(struct device *dev) +{ + struct device_node *node = dev->of_node; + + return of_device_is_compatible(node, "renesas,xhci-r8a7790") || + of_device_is_compatible(node, "renesas,xhci-r8a7791") || + of_device_is_compatible(node, "renesas,xhci-r8a7793") || + of_device_is_compatible(node, "renesas,rcar-gen2-xhci"); +} + +void xhci_rcar_start(struct usb_hcd *hcd) +{ + u32 temp; + + if (hcd->regs != NULL) { + /* Interrupt Enable */ + temp = readl(hcd->regs + RCAR_USB3_INT_ENA); + temp |= RCAR_USB3_INT_ENA_VAL; + writel(temp, hcd->regs + RCAR_USB3_INT_ENA); + if (xhci_rcar_is_gen2(hcd->self.controller)) + xhci_rcar_start_gen2(hcd); + } +} + +static int xhci_rcar_download_firmware(struct usb_hcd *hcd) +{ + struct device *dev = hcd->self.controller; + void __iomem *regs = hcd->regs; + struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd); + const struct firmware *fw; + int retval, index, j; + u32 data, val, temp; + u32 quirks = 0; + const struct soc_device_attribute *attr; + const char *firmware_name; + + /* + * According to the datasheet, "Upon the completion of FW Download, + * there is no need to write or reload FW". + */ + if (readl(regs + RCAR_USB3_DL_CTRL) & RCAR_USB3_DL_CTRL_FW_SUCCESS) + return 0; + + attr = soc_device_match(rcar_quirks_match); + if (attr) + quirks = (uintptr_t)attr->data; + + if (quirks & RCAR_XHCI_FIRMWARE_V2) + firmware_name = XHCI_RCAR_FIRMWARE_NAME_V2; + else if (quirks & RCAR_XHCI_FIRMWARE_V3) + firmware_name = XHCI_RCAR_FIRMWARE_NAME_V3; + else + firmware_name = priv->firmware_name; + + /* request R-Car USB3.0 firmware */ + retval = request_firmware(&fw, firmware_name, dev); + if (retval) + return retval; + + /* download R-Car USB3.0 firmware */ + temp = readl(regs + RCAR_USB3_DL_CTRL); + temp |= RCAR_USB3_DL_CTRL_ENABLE; + writel(temp, regs + RCAR_USB3_DL_CTRL); + + for (index = 0; index < fw->size; index += 4) { + /* to avoid reading beyond the end of the buffer */ + for (data = 0, j = 3; j >= 0; j--) { + if ((j + index) < fw->size) + data |= fw->data[index + j] << (8 * j); + } + writel(data, regs + RCAR_USB3_FW_DATA0); + temp = readl(regs + RCAR_USB3_DL_CTRL); + temp |= RCAR_USB3_DL_CTRL_FW_SET_DATA0; + writel(temp, regs + RCAR_USB3_DL_CTRL); + + retval = readl_poll_timeout_atomic(regs + RCAR_USB3_DL_CTRL, + val, !(val & RCAR_USB3_DL_CTRL_FW_SET_DATA0), + 1, 10000); + if (retval < 0) + break; + } + + temp = readl(regs + RCAR_USB3_DL_CTRL); + temp &= ~RCAR_USB3_DL_CTRL_ENABLE; + writel(temp, regs + RCAR_USB3_DL_CTRL); + + retval = readl_poll_timeout_atomic((regs + RCAR_USB3_DL_CTRL), + val, val & RCAR_USB3_DL_CTRL_FW_SUCCESS, 1, 10000); + + release_firmware(fw); + + return retval; +} + +static bool xhci_rcar_wait_for_pll_active(struct usb_hcd *hcd) +{ + int retval; + u32 val, mask = RCAR_USB3_AXH_STA_PLL_ACTIVE_MASK; + + retval = readl_poll_timeout_atomic(hcd->regs + RCAR_USB3_AXH_STA, + val, (val & mask) == mask, 1, 1000); + return !retval; +} + +/* This function needs to initialize a "phy" of usb before */ +int xhci_rcar_init_quirk(struct usb_hcd *hcd) +{ + /* If hcd->regs is NULL, we don't just call the following function */ + if (!hcd->regs) + return 0; + + if (!xhci_rcar_wait_for_pll_active(hcd)) + return -ETIMEDOUT; + + return xhci_rcar_download_firmware(hcd); +} + +int xhci_rcar_resume_quirk(struct usb_hcd *hcd) +{ + int ret; + + ret = xhci_rcar_download_firmware(hcd); + if (!ret) + xhci_rcar_start(hcd); + + return ret; +} -- cgit v1.2.3