From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/usb/misc/apple-mfi-fastcharge.c | 241 ++++++++++++++++++++++++++++++++ 1 file changed, 241 insertions(+) create mode 100644 drivers/usb/misc/apple-mfi-fastcharge.c (limited to 'drivers/usb/misc/apple-mfi-fastcharge.c') diff --git a/drivers/usb/misc/apple-mfi-fastcharge.c b/drivers/usb/misc/apple-mfi-fastcharge.c new file mode 100644 index 000000000..ac8695195 --- /dev/null +++ b/drivers/usb/misc/apple-mfi-fastcharge.c @@ -0,0 +1,241 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Fast-charge control for Apple "MFi" devices + * + * Copyright (C) 2019 Bastien Nocera + */ + +/* Standard include files */ +#include +#include +#include +#include + +MODULE_AUTHOR("Bastien Nocera "); +MODULE_DESCRIPTION("Fast-charge control for Apple \"MFi\" devices"); +MODULE_LICENSE("GPL"); + +#define TRICKLE_CURRENT_MA 0 +#define FAST_CURRENT_MA 2500 + +#define APPLE_VENDOR_ID 0x05ac /* Apple */ + +/* The product ID is defined as starting with 0x12nn, as per the + * "Choosing an Apple Device USB Configuration" section in + * release R9 (2012) of the "MFi Accessory Hardware Specification" + * + * To distinguish an Apple device, a USB host can check the device + * descriptor of attached USB devices for the following fields: + * ■ Vendor ID: 0x05AC + * ■ Product ID: 0x12nn + * + * Those checks will be done in .match() and .probe(). + */ + +static const struct usb_device_id mfi_fc_id_table[] = { + { .idVendor = APPLE_VENDOR_ID, + .match_flags = USB_DEVICE_ID_MATCH_VENDOR }, + {}, +}; + +MODULE_DEVICE_TABLE(usb, mfi_fc_id_table); + +/* Driver-local specific stuff */ +struct mfi_device { + struct usb_device *udev; + struct power_supply *battery; + int charge_type; +}; + +static int apple_mfi_fc_set_charge_type(struct mfi_device *mfi, + const union power_supply_propval *val) +{ + int current_ma; + int retval; + __u8 request_type; + + if (mfi->charge_type == val->intval) { + dev_dbg(&mfi->udev->dev, "charge type %d already set\n", + mfi->charge_type); + return 0; + } + + switch (val->intval) { + case POWER_SUPPLY_CHARGE_TYPE_TRICKLE: + current_ma = TRICKLE_CURRENT_MA; + break; + case POWER_SUPPLY_CHARGE_TYPE_FAST: + current_ma = FAST_CURRENT_MA; + break; + default: + return -EINVAL; + } + + request_type = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE; + retval = usb_control_msg(mfi->udev, usb_sndctrlpipe(mfi->udev, 0), + 0x40, /* Vendor‐defined power request */ + request_type, + current_ma, /* wValue, current offset */ + current_ma, /* wIndex, current offset */ + NULL, 0, USB_CTRL_GET_TIMEOUT); + if (retval) { + dev_dbg(&mfi->udev->dev, "retval = %d\n", retval); + return retval; + } + + mfi->charge_type = val->intval; + + return 0; +} + +static int apple_mfi_fc_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct mfi_device *mfi = power_supply_get_drvdata(psy); + + dev_dbg(&mfi->udev->dev, "prop: %d\n", psp); + + switch (psp) { + case POWER_SUPPLY_PROP_CHARGE_TYPE: + val->intval = mfi->charge_type; + break; + case POWER_SUPPLY_PROP_SCOPE: + val->intval = POWER_SUPPLY_SCOPE_DEVICE; + break; + default: + return -ENODATA; + } + + return 0; +} + +static int apple_mfi_fc_set_property(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct mfi_device *mfi = power_supply_get_drvdata(psy); + int ret; + + dev_dbg(&mfi->udev->dev, "prop: %d\n", psp); + + ret = pm_runtime_get_sync(&mfi->udev->dev); + if (ret < 0) { + pm_runtime_put_noidle(&mfi->udev->dev); + return ret; + } + + switch (psp) { + case POWER_SUPPLY_PROP_CHARGE_TYPE: + ret = apple_mfi_fc_set_charge_type(mfi, val); + break; + default: + ret = -EINVAL; + } + + pm_runtime_mark_last_busy(&mfi->udev->dev); + pm_runtime_put_autosuspend(&mfi->udev->dev); + + return ret; +} + +static int apple_mfi_fc_property_is_writeable(struct power_supply *psy, + enum power_supply_property psp) +{ + switch (psp) { + case POWER_SUPPLY_PROP_CHARGE_TYPE: + return 1; + default: + return 0; + } +} + +static enum power_supply_property apple_mfi_fc_properties[] = { + POWER_SUPPLY_PROP_CHARGE_TYPE, + POWER_SUPPLY_PROP_SCOPE +}; + +static const struct power_supply_desc apple_mfi_fc_desc = { + .name = "apple_mfi_fastcharge", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = apple_mfi_fc_properties, + .num_properties = ARRAY_SIZE(apple_mfi_fc_properties), + .get_property = apple_mfi_fc_get_property, + .set_property = apple_mfi_fc_set_property, + .property_is_writeable = apple_mfi_fc_property_is_writeable +}; + +static bool mfi_fc_match(struct usb_device *udev) +{ + int idProduct; + + idProduct = le16_to_cpu(udev->descriptor.idProduct); + /* See comment above mfi_fc_id_table[] */ + return (idProduct >= 0x1200 && idProduct <= 0x12ff); +} + +static int mfi_fc_probe(struct usb_device *udev) +{ + struct power_supply_config battery_cfg = {}; + struct mfi_device *mfi = NULL; + int err; + + if (!mfi_fc_match(udev)) + return -ENODEV; + + mfi = kzalloc(sizeof(struct mfi_device), GFP_KERNEL); + if (!mfi) + return -ENOMEM; + + battery_cfg.drv_data = mfi; + + mfi->charge_type = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; + mfi->battery = power_supply_register(&udev->dev, + &apple_mfi_fc_desc, + &battery_cfg); + if (IS_ERR(mfi->battery)) { + dev_err(&udev->dev, "Can't register battery\n"); + err = PTR_ERR(mfi->battery); + kfree(mfi); + return err; + } + + mfi->udev = usb_get_dev(udev); + dev_set_drvdata(&udev->dev, mfi); + + return 0; +} + +static void mfi_fc_disconnect(struct usb_device *udev) +{ + struct mfi_device *mfi; + + mfi = dev_get_drvdata(&udev->dev); + if (mfi->battery) + power_supply_unregister(mfi->battery); + dev_set_drvdata(&udev->dev, NULL); + usb_put_dev(mfi->udev); + kfree(mfi); +} + +static struct usb_device_driver mfi_fc_driver = { + .name = "apple-mfi-fastcharge", + .probe = mfi_fc_probe, + .disconnect = mfi_fc_disconnect, + .id_table = mfi_fc_id_table, + .match = mfi_fc_match, + .generic_subclass = 1, +}; + +static int __init mfi_fc_driver_init(void) +{ + return usb_register_device_driver(&mfi_fc_driver, THIS_MODULE); +} + +static void __exit mfi_fc_driver_exit(void) +{ + usb_deregister_device_driver(&mfi_fc_driver); +} + +module_init(mfi_fc_driver_init); +module_exit(mfi_fc_driver_exit); -- cgit v1.2.3