From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/usb/misc/usblcd.c | 450 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 450 insertions(+) create mode 100644 drivers/usb/misc/usblcd.c (limited to 'drivers/usb/misc/usblcd.c') diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c new file mode 100644 index 000000000..bb546f624 --- /dev/null +++ b/drivers/usb/misc/usblcd.c @@ -0,0 +1,450 @@ +// SPDX-License-Identifier: GPL-2.0 +/***************************************************************************** + * USBLCD Kernel Driver * + * Version 1.05 * + * (C) 2005 Georges Toth * + * * + * This file is licensed under the GPL. See COPYING in the package. * + * Based on usb-skeleton.c 2.0 by Greg Kroah-Hartman (greg@kroah.com) * + * * + * * + * 28.02.05 Complete rewrite of the original usblcd.c driver, * + * based on usb_skeleton.c. * + * This new driver allows more than one USB-LCD to be connected * + * and controlled, at once * + *****************************************************************************/ +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_VERSION "USBLCD Driver Version 1.05" + +#define USBLCD_MINOR 144 + +#define IOCTL_GET_HARD_VERSION 1 +#define IOCTL_GET_DRV_VERSION 2 + + +static const struct usb_device_id id_table[] = { + { .idVendor = 0x10D2, .match_flags = USB_DEVICE_ID_MATCH_VENDOR, }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +struct usb_lcd { + struct usb_device *udev; /* init: probe_lcd */ + struct usb_interface *interface; /* the interface for + this device */ + unsigned char *bulk_in_buffer; /* the buffer to receive + data */ + size_t bulk_in_size; /* the size of the + receive buffer */ + __u8 bulk_in_endpointAddr; /* the address of the + bulk in endpoint */ + __u8 bulk_out_endpointAddr; /* the address of the + bulk out endpoint */ + struct kref kref; + struct semaphore limit_sem; /* to stop writes at + full throttle from + using up all RAM */ + struct usb_anchor submitted; /* URBs to wait for + before suspend */ + struct rw_semaphore io_rwsem; + unsigned long disconnected:1; +}; +#define to_lcd_dev(d) container_of(d, struct usb_lcd, kref) + +#define USB_LCD_CONCURRENT_WRITES 5 + +static struct usb_driver lcd_driver; + + +static void lcd_delete(struct kref *kref) +{ + struct usb_lcd *dev = to_lcd_dev(kref); + + usb_put_dev(dev->udev); + kfree(dev->bulk_in_buffer); + kfree(dev); +} + + +static int lcd_open(struct inode *inode, struct file *file) +{ + struct usb_lcd *dev; + struct usb_interface *interface; + int subminor, r; + + subminor = iminor(inode); + + interface = usb_find_interface(&lcd_driver, subminor); + if (!interface) { + pr_err("USBLCD: %s - error, can't find device for minor %d\n", + __func__, subminor); + return -ENODEV; + } + + dev = usb_get_intfdata(interface); + + /* increment our usage count for the device */ + kref_get(&dev->kref); + + /* grab a power reference */ + r = usb_autopm_get_interface(interface); + if (r < 0) { + kref_put(&dev->kref, lcd_delete); + return r; + } + + /* save our object in the file's private structure */ + file->private_data = dev; + + return 0; +} + +static int lcd_release(struct inode *inode, struct file *file) +{ + struct usb_lcd *dev; + + dev = file->private_data; + if (dev == NULL) + return -ENODEV; + + /* decrement the count on our device */ + usb_autopm_put_interface(dev->interface); + kref_put(&dev->kref, lcd_delete); + return 0; +} + +static ssize_t lcd_read(struct file *file, char __user * buffer, + size_t count, loff_t *ppos) +{ + struct usb_lcd *dev; + int retval = 0; + int bytes_read; + + dev = file->private_data; + + down_read(&dev->io_rwsem); + + if (dev->disconnected) { + retval = -ENODEV; + goto out_up_io; + } + + /* do a blocking bulk read to get data from the device */ + retval = usb_bulk_msg(dev->udev, + usb_rcvbulkpipe(dev->udev, + dev->bulk_in_endpointAddr), + dev->bulk_in_buffer, + min(dev->bulk_in_size, count), + &bytes_read, 10000); + + /* if the read was successful, copy the data to userspace */ + if (!retval) { + if (copy_to_user(buffer, dev->bulk_in_buffer, bytes_read)) + retval = -EFAULT; + else + retval = bytes_read; + } + +out_up_io: + up_read(&dev->io_rwsem); + + return retval; +} + +static long lcd_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + struct usb_lcd *dev; + u16 bcdDevice; + char buf[30]; + + dev = file->private_data; + if (dev == NULL) + return -ENODEV; + + switch (cmd) { + case IOCTL_GET_HARD_VERSION: + bcdDevice = le16_to_cpu((dev->udev)->descriptor.bcdDevice); + sprintf(buf, "%1d%1d.%1d%1d", + (bcdDevice & 0xF000)>>12, + (bcdDevice & 0xF00)>>8, + (bcdDevice & 0xF0)>>4, + (bcdDevice & 0xF)); + if (copy_to_user((void __user *)arg, buf, strlen(buf)) != 0) + return -EFAULT; + break; + case IOCTL_GET_DRV_VERSION: + sprintf(buf, DRIVER_VERSION); + if (copy_to_user((void __user *)arg, buf, strlen(buf)) != 0) + return -EFAULT; + break; + default: + return -ENOTTY; + } + + return 0; +} + +static void lcd_write_bulk_callback(struct urb *urb) +{ + struct usb_lcd *dev; + int status = urb->status; + + dev = urb->context; + + /* sync/async unlink faults aren't errors */ + if (status && + !(status == -ENOENT || + status == -ECONNRESET || + status == -ESHUTDOWN)) { + dev_dbg(&dev->interface->dev, + "nonzero write bulk status received: %d\n", status); + } + + /* free up our allocated buffer */ + usb_free_coherent(urb->dev, urb->transfer_buffer_length, + urb->transfer_buffer, urb->transfer_dma); + up(&dev->limit_sem); +} + +static ssize_t lcd_write(struct file *file, const char __user * user_buffer, + size_t count, loff_t *ppos) +{ + struct usb_lcd *dev; + int retval = 0, r; + struct urb *urb = NULL; + char *buf = NULL; + + dev = file->private_data; + + /* verify that we actually have some data to write */ + if (count == 0) + goto exit; + + r = down_interruptible(&dev->limit_sem); + if (r < 0) + return -EINTR; + + down_read(&dev->io_rwsem); + + if (dev->disconnected) { + retval = -ENODEV; + goto err_up_io; + } + + /* create a urb, and a buffer for it, and copy the data to the urb */ + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) { + retval = -ENOMEM; + goto err_up_io; + } + + buf = usb_alloc_coherent(dev->udev, count, GFP_KERNEL, + &urb->transfer_dma); + if (!buf) { + retval = -ENOMEM; + goto error; + } + + if (copy_from_user(buf, user_buffer, count)) { + retval = -EFAULT; + goto error; + } + + /* initialize the urb properly */ + usb_fill_bulk_urb(urb, dev->udev, + usb_sndbulkpipe(dev->udev, + dev->bulk_out_endpointAddr), + buf, count, lcd_write_bulk_callback, dev); + urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + usb_anchor_urb(urb, &dev->submitted); + + /* send the data out the bulk port */ + retval = usb_submit_urb(urb, GFP_KERNEL); + if (retval) { + dev_err(&dev->udev->dev, + "%s - failed submitting write urb, error %d\n", + __func__, retval); + goto error_unanchor; + } + + /* release our reference to this urb, + the USB core will eventually free it entirely */ + usb_free_urb(urb); + + up_read(&dev->io_rwsem); +exit: + return count; +error_unanchor: + usb_unanchor_urb(urb); +error: + usb_free_coherent(dev->udev, count, buf, urb->transfer_dma); + usb_free_urb(urb); +err_up_io: + up_read(&dev->io_rwsem); + up(&dev->limit_sem); + return retval; +} + +static const struct file_operations lcd_fops = { + .owner = THIS_MODULE, + .read = lcd_read, + .write = lcd_write, + .open = lcd_open, + .unlocked_ioctl = lcd_ioctl, + .release = lcd_release, + .llseek = noop_llseek, +}; + +/* + * usb class driver info in order to get a minor number from the usb core, + * and to have the device registered with the driver core + */ +static struct usb_class_driver lcd_class = { + .name = "lcd%d", + .fops = &lcd_fops, + .minor_base = USBLCD_MINOR, +}; + +static int lcd_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_lcd *dev = NULL; + struct usb_endpoint_descriptor *bulk_in, *bulk_out; + int i; + int retval; + + /* allocate memory for our device state and initialize it */ + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) + return -ENOMEM; + + kref_init(&dev->kref); + sema_init(&dev->limit_sem, USB_LCD_CONCURRENT_WRITES); + init_rwsem(&dev->io_rwsem); + init_usb_anchor(&dev->submitted); + + dev->udev = usb_get_dev(interface_to_usbdev(interface)); + dev->interface = interface; + + if (le16_to_cpu(dev->udev->descriptor.idProduct) != 0x0001) { + dev_warn(&interface->dev, "USBLCD model not supported.\n"); + retval = -ENODEV; + goto error; + } + + /* set up the endpoint information */ + /* use only the first bulk-in and bulk-out endpoints */ + retval = usb_find_common_endpoints(interface->cur_altsetting, + &bulk_in, &bulk_out, NULL, NULL); + if (retval) { + dev_err(&interface->dev, + "Could not find both bulk-in and bulk-out endpoints\n"); + goto error; + } + + dev->bulk_in_size = usb_endpoint_maxp(bulk_in); + dev->bulk_in_endpointAddr = bulk_in->bEndpointAddress; + dev->bulk_in_buffer = kmalloc(dev->bulk_in_size, GFP_KERNEL); + if (!dev->bulk_in_buffer) { + retval = -ENOMEM; + goto error; + } + + dev->bulk_out_endpointAddr = bulk_out->bEndpointAddress; + + /* save our data pointer in this interface device */ + usb_set_intfdata(interface, dev); + + /* we can register the device now, as it is ready */ + retval = usb_register_dev(interface, &lcd_class); + if (retval) { + /* something prevented us from registering this driver */ + dev_err(&interface->dev, + "Not able to get a minor for this device.\n"); + goto error; + } + + i = le16_to_cpu(dev->udev->descriptor.bcdDevice); + + dev_info(&interface->dev, "USBLCD Version %1d%1d.%1d%1d found " + "at address %d\n", (i & 0xF000)>>12, (i & 0xF00)>>8, + (i & 0xF0)>>4, (i & 0xF), dev->udev->devnum); + + /* let the user know what node this device is now attached to */ + dev_info(&interface->dev, "USB LCD device now attached to USBLCD-%d\n", + interface->minor); + return 0; + +error: + kref_put(&dev->kref, lcd_delete); + return retval; +} + +static void lcd_draw_down(struct usb_lcd *dev) +{ + int time; + + time = usb_wait_anchor_empty_timeout(&dev->submitted, 1000); + if (!time) + usb_kill_anchored_urbs(&dev->submitted); +} + +static int lcd_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct usb_lcd *dev = usb_get_intfdata(intf); + + if (!dev) + return 0; + lcd_draw_down(dev); + return 0; +} + +static int lcd_resume(struct usb_interface *intf) +{ + return 0; +} + +static void lcd_disconnect(struct usb_interface *interface) +{ + struct usb_lcd *dev = usb_get_intfdata(interface); + int minor = interface->minor; + + /* give back our minor */ + usb_deregister_dev(interface, &lcd_class); + + down_write(&dev->io_rwsem); + dev->disconnected = 1; + up_write(&dev->io_rwsem); + + usb_kill_anchored_urbs(&dev->submitted); + + /* decrement our usage count */ + kref_put(&dev->kref, lcd_delete); + + dev_info(&interface->dev, "USB LCD #%d now disconnected\n", minor); +} + +static struct usb_driver lcd_driver = { + .name = "usblcd", + .probe = lcd_probe, + .disconnect = lcd_disconnect, + .suspend = lcd_suspend, + .resume = lcd_resume, + .id_table = id_table, + .supports_autosuspend = 1, +}; + +module_usb_driver(lcd_driver); + +MODULE_AUTHOR("Georges Toth "); +MODULE_DESCRIPTION(DRIVER_VERSION); +MODULE_LICENSE("GPL"); -- cgit v1.2.3