From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/usb/musb/mpfs.c | 269 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 269 insertions(+) create mode 100644 drivers/usb/musb/mpfs.c (limited to 'drivers/usb/musb/mpfs.c') diff --git a/drivers/usb/musb/mpfs.c b/drivers/usb/musb/mpfs.c new file mode 100644 index 000000000..cea2e8108 --- /dev/null +++ b/drivers/usb/musb/mpfs.c @@ -0,0 +1,269 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * PolarFire SoC (MPFS) MUSB Glue Layer + * + * Copyright (c) 2020-2022 Microchip Corporation. All rights reserved. + * Based on {omap2430,tusb6010,ux500}.c + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "musb_core.h" +#include "musb_dma.h" + +#define MPFS_MUSB_MAX_EP_NUM 8 +#define MPFS_MUSB_RAM_BITS 12 + +struct mpfs_glue { + struct device *dev; + struct platform_device *musb; + struct platform_device *phy; + struct clk *clk; +}; + +static struct musb_fifo_cfg mpfs_musb_mode_cfg[] = { + { .hw_ep_num = 1, .style = FIFO_TX, .maxpacket = 512, }, + { .hw_ep_num = 1, .style = FIFO_RX, .maxpacket = 512, }, + { .hw_ep_num = 2, .style = FIFO_TX, .maxpacket = 512, }, + { .hw_ep_num = 2, .style = FIFO_RX, .maxpacket = 512, }, + { .hw_ep_num = 3, .style = FIFO_TX, .maxpacket = 512, }, + { .hw_ep_num = 3, .style = FIFO_RX, .maxpacket = 512, }, + { .hw_ep_num = 4, .style = FIFO_TX, .maxpacket = 1024, }, + { .hw_ep_num = 4, .style = FIFO_RX, .maxpacket = 4096, }, +}; + +static const struct musb_hdrc_config mpfs_musb_hdrc_config = { + .fifo_cfg = mpfs_musb_mode_cfg, + .fifo_cfg_size = ARRAY_SIZE(mpfs_musb_mode_cfg), + .multipoint = true, + .dyn_fifo = true, + .num_eps = MPFS_MUSB_MAX_EP_NUM, + .ram_bits = MPFS_MUSB_RAM_BITS, +}; + +static irqreturn_t mpfs_musb_interrupt(int irq, void *__hci) +{ + unsigned long flags; + irqreturn_t ret = IRQ_NONE; + struct musb *musb = __hci; + + spin_lock_irqsave(&musb->lock, flags); + + musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB); + musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX); + musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX); + + if (musb->int_usb || musb->int_tx || musb->int_rx) { + musb_writeb(musb->mregs, MUSB_INTRUSB, musb->int_usb); + musb_writew(musb->mregs, MUSB_INTRTX, musb->int_tx); + musb_writew(musb->mregs, MUSB_INTRRX, musb->int_rx); + ret = musb_interrupt(musb); + } + + spin_unlock_irqrestore(&musb->lock, flags); + + return ret; +} + +static void mpfs_musb_set_vbus(struct musb *musb, int is_on) +{ + u8 devctl; + + /* + * HDRC controls CPEN, but beware current surges during device + * connect. They can trigger transient overcurrent conditions + * that must be ignored. + */ + devctl = musb_readb(musb->mregs, MUSB_DEVCTL); + + if (is_on) { + musb->is_active = 1; + musb->xceiv->otg->default_a = 1; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; + devctl |= MUSB_DEVCTL_SESSION; + MUSB_HST_MODE(musb); + } else { + musb->is_active = 0; + + /* + * NOTE: skipping A_WAIT_VFALL -> A_IDLE and + * jumping right to B_IDLE... + */ + musb->xceiv->otg->default_a = 0; + musb->xceiv->otg->state = OTG_STATE_B_IDLE; + devctl &= ~MUSB_DEVCTL_SESSION; + + MUSB_DEV_MODE(musb); + } + + musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); + + dev_dbg(musb->controller, "VBUS %s, devctl %02x\n", + usb_otg_state_string(musb->xceiv->otg->state), + musb_readb(musb->mregs, MUSB_DEVCTL)); +} + +static int mpfs_musb_init(struct musb *musb) +{ + struct device *dev = musb->controller; + + musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); + if (IS_ERR(musb->xceiv)) { + dev_err(dev, "HS UDC: no transceiver configured\n"); + return PTR_ERR(musb->xceiv); + } + + musb->dyn_fifo = true; + musb->isr = mpfs_musb_interrupt; + + musb_platform_set_vbus(musb, 1); + + return 0; +} + +static const struct musb_platform_ops mpfs_ops = { + .quirks = MUSB_DMA_INVENTRA, + .init = mpfs_musb_init, + .fifo_mode = 2, +#ifdef CONFIG_USB_INVENTRA_DMA + .dma_init = musbhs_dma_controller_create, + .dma_exit = musbhs_dma_controller_destroy, +#endif + .set_vbus = mpfs_musb_set_vbus +}; + +static int mpfs_probe(struct platform_device *pdev) +{ + struct musb_hdrc_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct mpfs_glue *glue; + struct platform_device *musb_pdev; + struct device *dev = &pdev->dev; + struct clk *clk; + int ret; + + glue = devm_kzalloc(dev, sizeof(*glue), GFP_KERNEL); + if (!glue) + return -ENOMEM; + + musb_pdev = platform_device_alloc("musb-hdrc", PLATFORM_DEVID_AUTO); + if (!musb_pdev) { + dev_err(dev, "failed to allocate musb device\n"); + return -ENOMEM; + } + + clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "failed to get clock\n"); + ret = PTR_ERR(clk); + goto err_phy_release; + } + + ret = clk_prepare_enable(clk); + if (ret) { + dev_err(&pdev->dev, "failed to enable clock\n"); + goto err_phy_release; + } + + musb_pdev->dev.parent = dev; + musb_pdev->dev.coherent_dma_mask = DMA_BIT_MASK(39); + musb_pdev->dev.dma_mask = &musb_pdev->dev.coherent_dma_mask; + device_set_of_node_from_dev(&musb_pdev->dev, dev); + + glue->dev = dev; + glue->musb = musb_pdev; + glue->clk = clk; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + ret = -ENOMEM; + goto err_clk_disable; + } + + pdata->config = &mpfs_musb_hdrc_config; + pdata->platform_ops = &mpfs_ops; + + pdata->mode = usb_get_dr_mode(dev); + if (pdata->mode == USB_DR_MODE_UNKNOWN) { + dev_info(dev, "No dr_mode property found, defaulting to otg\n"); + pdata->mode = USB_DR_MODE_OTG; + } + + glue->phy = usb_phy_generic_register(); + if (IS_ERR(glue->phy)) { + dev_err(dev, "failed to register usb-phy %ld\n", + PTR_ERR(glue->phy)); + ret = PTR_ERR(glue->phy); + goto err_clk_disable; + } + + platform_set_drvdata(pdev, glue); + + ret = platform_device_add_resources(musb_pdev, pdev->resource, pdev->num_resources); + if (ret) { + dev_err(dev, "failed to add resources\n"); + goto err_clk_disable; + } + + ret = platform_device_add_data(musb_pdev, pdata, sizeof(*pdata)); + if (ret) { + dev_err(dev, "failed to add platform_data\n"); + goto err_clk_disable; + } + + ret = platform_device_add(musb_pdev); + if (ret) { + dev_err(dev, "failed to register musb device\n"); + goto err_clk_disable; + } + + dev_info(&pdev->dev, "Registered MPFS MUSB driver\n"); + return 0; + +err_clk_disable: + clk_disable_unprepare(clk); + +err_phy_release: + usb_phy_generic_unregister(glue->phy); + platform_device_put(musb_pdev); + return ret; +} + +static int mpfs_remove(struct platform_device *pdev) +{ + struct mpfs_glue *glue = platform_get_drvdata(pdev); + + clk_disable_unprepare(glue->clk); + platform_device_unregister(glue->musb); + usb_phy_generic_unregister(pdev); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id mpfs_id_table[] = { + { .compatible = "microchip,mpfs-musb" }, + { } +}; +MODULE_DEVICE_TABLE(of, mpfs_id_table); +#endif + +static struct platform_driver mpfs_musb_driver = { + .probe = mpfs_probe, + .remove = mpfs_remove, + .driver = { + .name = "mpfs-musb", + .of_match_table = of_match_ptr(mpfs_id_table) + }, +}; + +module_platform_driver(mpfs_musb_driver); + +MODULE_DESCRIPTION("PolarFire SoC MUSB Glue Layer"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3