From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/usb/musb/ux500_dma.c | 396 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 396 insertions(+) create mode 100644 drivers/usb/musb/ux500_dma.c (limited to 'drivers/usb/musb/ux500_dma.c') diff --git a/drivers/usb/musb/ux500_dma.c b/drivers/usb/musb/ux500_dma.c new file mode 100644 index 000000000..d5cf5e8bb --- /dev/null +++ b/drivers/usb/musb/ux500_dma.c @@ -0,0 +1,396 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * drivers/usb/musb/ux500_dma.c + * + * U8500 DMA support code + * + * Copyright (C) 2009 STMicroelectronics + * Copyright (C) 2011 ST-Ericsson SA + * Authors: + * Mian Yousaf Kaukab + * Praveena Nadahally + * Rajaram Regupathy + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "musb_core.h" + +static const char *iep_chan_names[] = { "iep_1_9", "iep_2_10", "iep_3_11", "iep_4_12", + "iep_5_13", "iep_6_14", "iep_7_15", "iep_8" }; +static const char *oep_chan_names[] = { "oep_1_9", "oep_2_10", "oep_3_11", "oep_4_12", + "oep_5_13", "oep_6_14", "oep_7_15", "oep_8" }; + +struct ux500_dma_channel { + struct dma_channel channel; + struct ux500_dma_controller *controller; + struct musb_hw_ep *hw_ep; + struct dma_chan *dma_chan; + unsigned int cur_len; + dma_cookie_t cookie; + u8 ch_num; + u8 is_tx; + u8 is_allocated; +}; + +struct ux500_dma_controller { + struct dma_controller controller; + struct ux500_dma_channel rx_channel[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS]; + struct ux500_dma_channel tx_channel[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS]; + void *private_data; + dma_addr_t phy_base; +}; + +/* Work function invoked from DMA callback to handle rx transfers. */ +static void ux500_dma_callback(void *private_data) +{ + struct dma_channel *channel = private_data; + struct ux500_dma_channel *ux500_channel = channel->private_data; + struct musb_hw_ep *hw_ep = ux500_channel->hw_ep; + struct musb *musb = hw_ep->musb; + unsigned long flags; + + dev_dbg(musb->controller, "DMA rx transfer done on hw_ep=%d\n", + hw_ep->epnum); + + spin_lock_irqsave(&musb->lock, flags); + ux500_channel->channel.actual_len = ux500_channel->cur_len; + ux500_channel->channel.status = MUSB_DMA_STATUS_FREE; + musb_dma_completion(musb, hw_ep->epnum, ux500_channel->is_tx); + spin_unlock_irqrestore(&musb->lock, flags); + +} + +static bool ux500_configure_channel(struct dma_channel *channel, + u16 packet_sz, u8 mode, + dma_addr_t dma_addr, u32 len) +{ + struct ux500_dma_channel *ux500_channel = channel->private_data; + struct musb_hw_ep *hw_ep = ux500_channel->hw_ep; + struct dma_chan *dma_chan = ux500_channel->dma_chan; + struct dma_async_tx_descriptor *dma_desc; + enum dma_transfer_direction direction; + struct scatterlist sg; + struct dma_slave_config slave_conf; + enum dma_slave_buswidth addr_width; + struct musb *musb = ux500_channel->controller->private_data; + dma_addr_t usb_fifo_addr = (musb->io.fifo_offset(hw_ep->epnum) + + ux500_channel->controller->phy_base); + + dev_dbg(musb->controller, + "packet_sz=%d, mode=%d, dma_addr=0x%llx, len=%d is_tx=%d\n", + packet_sz, mode, (unsigned long long) dma_addr, + len, ux500_channel->is_tx); + + ux500_channel->cur_len = len; + + sg_init_table(&sg, 1); + sg_set_page(&sg, pfn_to_page(PFN_DOWN(dma_addr)), len, + offset_in_page(dma_addr)); + sg_dma_address(&sg) = dma_addr; + sg_dma_len(&sg) = len; + + direction = ux500_channel->is_tx ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM; + addr_width = (len & 0x3) ? DMA_SLAVE_BUSWIDTH_1_BYTE : + DMA_SLAVE_BUSWIDTH_4_BYTES; + + slave_conf.direction = direction; + slave_conf.src_addr = usb_fifo_addr; + slave_conf.src_addr_width = addr_width; + slave_conf.src_maxburst = 16; + slave_conf.dst_addr = usb_fifo_addr; + slave_conf.dst_addr_width = addr_width; + slave_conf.dst_maxburst = 16; + slave_conf.device_fc = false; + + dmaengine_slave_config(dma_chan, &slave_conf); + + dma_desc = dmaengine_prep_slave_sg(dma_chan, &sg, 1, direction, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!dma_desc) + return false; + + dma_desc->callback = ux500_dma_callback; + dma_desc->callback_param = channel; + ux500_channel->cookie = dma_desc->tx_submit(dma_desc); + + dma_async_issue_pending(dma_chan); + + return true; +} + +static struct dma_channel *ux500_dma_channel_allocate(struct dma_controller *c, + struct musb_hw_ep *hw_ep, u8 is_tx) +{ + struct ux500_dma_controller *controller = container_of(c, + struct ux500_dma_controller, controller); + struct ux500_dma_channel *ux500_channel = NULL; + struct musb *musb = controller->private_data; + u8 ch_num = hw_ep->epnum - 1; + + /* 8 DMA channels (0 - 7). Each DMA channel can only be allocated + * to specified hw_ep. For example DMA channel 0 can only be allocated + * to hw_ep 1 and 9. + */ + if (ch_num > 7) + ch_num -= 8; + + if (ch_num >= UX500_MUSB_DMA_NUM_RX_TX_CHANNELS) + return NULL; + + ux500_channel = is_tx ? &(controller->tx_channel[ch_num]) : + &(controller->rx_channel[ch_num]) ; + + /* Check if channel is already used. */ + if (ux500_channel->is_allocated) + return NULL; + + ux500_channel->hw_ep = hw_ep; + ux500_channel->is_allocated = 1; + + dev_dbg(musb->controller, "hw_ep=%d, is_tx=0x%x, channel=%d\n", + hw_ep->epnum, is_tx, ch_num); + + return &(ux500_channel->channel); +} + +static void ux500_dma_channel_release(struct dma_channel *channel) +{ + struct ux500_dma_channel *ux500_channel = channel->private_data; + struct musb *musb = ux500_channel->controller->private_data; + + dev_dbg(musb->controller, "channel=%d\n", ux500_channel->ch_num); + + if (ux500_channel->is_allocated) { + ux500_channel->is_allocated = 0; + channel->status = MUSB_DMA_STATUS_FREE; + channel->actual_len = 0; + } +} + +static int ux500_dma_is_compatible(struct dma_channel *channel, + u16 maxpacket, void *buf, u32 length) +{ + if ((maxpacket & 0x3) || + ((unsigned long int) buf & 0x3) || + (length < 512) || + (length & 0x3)) + return false; + else + return true; +} + +static int ux500_dma_channel_program(struct dma_channel *channel, + u16 packet_sz, u8 mode, + dma_addr_t dma_addr, u32 len) +{ + int ret; + + BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN || + channel->status == MUSB_DMA_STATUS_BUSY); + + channel->status = MUSB_DMA_STATUS_BUSY; + channel->actual_len = 0; + ret = ux500_configure_channel(channel, packet_sz, mode, dma_addr, len); + if (!ret) + channel->status = MUSB_DMA_STATUS_FREE; + + return ret; +} + +static int ux500_dma_channel_abort(struct dma_channel *channel) +{ + struct ux500_dma_channel *ux500_channel = channel->private_data; + struct ux500_dma_controller *controller = ux500_channel->controller; + struct musb *musb = controller->private_data; + void __iomem *epio = musb->endpoints[ux500_channel->hw_ep->epnum].regs; + u16 csr; + + dev_dbg(musb->controller, "channel=%d, is_tx=%d\n", + ux500_channel->ch_num, ux500_channel->is_tx); + + if (channel->status == MUSB_DMA_STATUS_BUSY) { + if (ux500_channel->is_tx) { + csr = musb_readw(epio, MUSB_TXCSR); + csr &= ~(MUSB_TXCSR_AUTOSET | + MUSB_TXCSR_DMAENAB | + MUSB_TXCSR_DMAMODE); + musb_writew(epio, MUSB_TXCSR, csr); + } else { + csr = musb_readw(epio, MUSB_RXCSR); + csr &= ~(MUSB_RXCSR_AUTOCLEAR | + MUSB_RXCSR_DMAENAB | + MUSB_RXCSR_DMAMODE); + musb_writew(epio, MUSB_RXCSR, csr); + } + + dmaengine_terminate_all(ux500_channel->dma_chan); + channel->status = MUSB_DMA_STATUS_FREE; + } + return 0; +} + +static void ux500_dma_controller_stop(struct ux500_dma_controller *controller) +{ + struct ux500_dma_channel *ux500_channel; + struct dma_channel *channel; + u8 ch_num; + + for (ch_num = 0; ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; ch_num++) { + channel = &controller->rx_channel[ch_num].channel; + ux500_channel = channel->private_data; + + ux500_dma_channel_release(channel); + + if (ux500_channel->dma_chan) + dma_release_channel(ux500_channel->dma_chan); + } + + for (ch_num = 0; ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; ch_num++) { + channel = &controller->tx_channel[ch_num].channel; + ux500_channel = channel->private_data; + + ux500_dma_channel_release(channel); + + if (ux500_channel->dma_chan) + dma_release_channel(ux500_channel->dma_chan); + } +} + +static int ux500_dma_controller_start(struct ux500_dma_controller *controller) +{ + struct ux500_dma_channel *ux500_channel = NULL; + struct musb *musb = controller->private_data; + struct device *dev = musb->controller; + struct musb_hdrc_platform_data *plat = dev_get_platdata(dev); + struct ux500_musb_board_data *data; + struct dma_channel *dma_channel = NULL; + char **chan_names; + u32 ch_num; + u8 dir; + u8 is_tx = 0; + + void **param_array; + struct ux500_dma_channel *channel_array; + dma_cap_mask_t mask; + + if (!plat) { + dev_err(musb->controller, "No platform data\n"); + return -EINVAL; + } + + data = plat->board_data; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + /* Prepare the loop for RX channels */ + channel_array = controller->rx_channel; + param_array = data ? data->dma_rx_param_array : NULL; + chan_names = (char **)iep_chan_names; + + for (dir = 0; dir < 2; dir++) { + for (ch_num = 0; + ch_num < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; + ch_num++) { + ux500_channel = &channel_array[ch_num]; + ux500_channel->controller = controller; + ux500_channel->ch_num = ch_num; + ux500_channel->is_tx = is_tx; + + dma_channel = &(ux500_channel->channel); + dma_channel->private_data = ux500_channel; + dma_channel->status = MUSB_DMA_STATUS_FREE; + dma_channel->max_len = SZ_16M; + + ux500_channel->dma_chan = + dma_request_chan(dev, chan_names[ch_num]); + + if (IS_ERR(ux500_channel->dma_chan)) + ux500_channel->dma_chan = + dma_request_channel(mask, + data ? + data->dma_filter : + NULL, + param_array ? + param_array[ch_num] : + NULL); + + if (!ux500_channel->dma_chan) { + ERR("Dma pipe allocation error dir=%d ch=%d\n", + dir, ch_num); + + /* Release already allocated channels */ + ux500_dma_controller_stop(controller); + + return -EBUSY; + } + + } + + /* Prepare the loop for TX channels */ + channel_array = controller->tx_channel; + param_array = data ? data->dma_tx_param_array : NULL; + chan_names = (char **)oep_chan_names; + is_tx = 1; + } + + return 0; +} + +void ux500_dma_controller_destroy(struct dma_controller *c) +{ + struct ux500_dma_controller *controller = container_of(c, + struct ux500_dma_controller, controller); + + ux500_dma_controller_stop(controller); + kfree(controller); +} +EXPORT_SYMBOL_GPL(ux500_dma_controller_destroy); + +struct dma_controller * +ux500_dma_controller_create(struct musb *musb, void __iomem *base) +{ + struct ux500_dma_controller *controller; + struct platform_device *pdev = to_platform_device(musb->controller); + struct resource *iomem; + int ret; + + controller = kzalloc(sizeof(*controller), GFP_KERNEL); + if (!controller) + goto kzalloc_fail; + + controller->private_data = musb; + + /* Save physical address for DMA controller. */ + iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!iomem) { + dev_err(musb->controller, "no memory resource defined\n"); + goto plat_get_fail; + } + + controller->phy_base = (dma_addr_t) iomem->start; + + controller->controller.channel_alloc = ux500_dma_channel_allocate; + controller->controller.channel_release = ux500_dma_channel_release; + controller->controller.channel_program = ux500_dma_channel_program; + controller->controller.channel_abort = ux500_dma_channel_abort; + controller->controller.is_compatible = ux500_dma_is_compatible; + + ret = ux500_dma_controller_start(controller); + if (ret) + goto plat_get_fail; + return &controller->controller; + +plat_get_fail: + kfree(controller); +kzalloc_fail: + return NULL; +} +EXPORT_SYMBOL_GPL(ux500_dma_controller_create); -- cgit v1.2.3