From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/usb/phy/phy-generic.c | 373 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 373 insertions(+) create mode 100644 drivers/usb/phy/phy-generic.c (limited to 'drivers/usb/phy/phy-generic.c') diff --git a/drivers/usb/phy/phy-generic.c b/drivers/usb/phy/phy-generic.c new file mode 100644 index 000000000..c1309ea24 --- /dev/null +++ b/drivers/usb/phy/phy-generic.c @@ -0,0 +1,373 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * NOP USB transceiver for all USB transceiver which are either built-in + * into USB IP or which are mostly autonomous. + * + * Copyright (C) 2009 Texas Instruments Inc + * Author: Ajay Kumar Gupta + * + * Current status: + * This provides a "nop" transceiver for PHYs which are + * autonomous such as isp1504, isp1707, etc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "phy-generic.h" + +#define VBUS_IRQ_FLAGS \ + (IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | \ + IRQF_ONESHOT) + +struct platform_device *usb_phy_generic_register(void) +{ + return platform_device_register_simple("usb_phy_generic", + PLATFORM_DEVID_AUTO, NULL, 0); +} +EXPORT_SYMBOL_GPL(usb_phy_generic_register); + +void usb_phy_generic_unregister(struct platform_device *pdev) +{ + platform_device_unregister(pdev); +} +EXPORT_SYMBOL_GPL(usb_phy_generic_unregister); + +static int nop_set_suspend(struct usb_phy *x, int suspend) +{ + struct usb_phy_generic *nop = dev_get_drvdata(x->dev); + + if (!IS_ERR(nop->clk)) { + if (suspend) + clk_disable_unprepare(nop->clk); + else + clk_prepare_enable(nop->clk); + } + + return 0; +} + +static void nop_reset(struct usb_phy_generic *nop) +{ + if (!nop->gpiod_reset) + return; + + gpiod_set_value_cansleep(nop->gpiod_reset, 1); + usleep_range(10000, 20000); + gpiod_set_value_cansleep(nop->gpiod_reset, 0); +} + +/* interface to regulator framework */ +static void nop_set_vbus_draw(struct usb_phy_generic *nop, unsigned mA) +{ + struct regulator *vbus_draw = nop->vbus_draw; + int enabled; + int ret; + + if (!vbus_draw) + return; + + enabled = nop->vbus_draw_enabled; + if (mA) { + regulator_set_current_limit(vbus_draw, 0, 1000 * mA); + if (!enabled) { + ret = regulator_enable(vbus_draw); + if (ret < 0) + return; + nop->vbus_draw_enabled = 1; + } + } else { + if (enabled) { + ret = regulator_disable(vbus_draw); + if (ret < 0) + return; + nop->vbus_draw_enabled = 0; + } + } + nop->mA = mA; +} + + +static irqreturn_t nop_gpio_vbus_thread(int irq, void *data) +{ + struct usb_phy_generic *nop = data; + struct usb_otg *otg = nop->phy.otg; + int vbus, status; + + vbus = gpiod_get_value(nop->gpiod_vbus); + if ((vbus ^ nop->vbus) == 0) + return IRQ_HANDLED; + nop->vbus = vbus; + + if (vbus) { + status = USB_EVENT_VBUS; + otg->state = OTG_STATE_B_PERIPHERAL; + nop->phy.last_event = status; + + /* drawing a "unit load" is *always* OK, except for OTG */ + nop_set_vbus_draw(nop, 100); + + atomic_notifier_call_chain(&nop->phy.notifier, status, + otg->gadget); + } else { + nop_set_vbus_draw(nop, 0); + + status = USB_EVENT_NONE; + otg->state = OTG_STATE_B_IDLE; + nop->phy.last_event = status; + + atomic_notifier_call_chain(&nop->phy.notifier, status, + otg->gadget); + } + return IRQ_HANDLED; +} + +int usb_gen_phy_init(struct usb_phy *phy) +{ + struct usb_phy_generic *nop = dev_get_drvdata(phy->dev); + int ret; + + if (!IS_ERR(nop->vcc)) { + if (regulator_enable(nop->vcc)) + dev_err(phy->dev, "Failed to enable power\n"); + } + + if (!IS_ERR(nop->clk)) { + ret = clk_prepare_enable(nop->clk); + if (ret) + return ret; + } + + nop_reset(nop); + + return 0; +} +EXPORT_SYMBOL_GPL(usb_gen_phy_init); + +void usb_gen_phy_shutdown(struct usb_phy *phy) +{ + struct usb_phy_generic *nop = dev_get_drvdata(phy->dev); + + gpiod_set_value_cansleep(nop->gpiod_reset, 1); + + if (!IS_ERR(nop->clk)) + clk_disable_unprepare(nop->clk); + + if (!IS_ERR(nop->vcc)) { + if (regulator_disable(nop->vcc)) + dev_err(phy->dev, "Failed to disable power\n"); + } +} +EXPORT_SYMBOL_GPL(usb_gen_phy_shutdown); + +static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) +{ + if (!otg) + return -ENODEV; + + if (!gadget) { + otg->gadget = NULL; + return -ENODEV; + } + + otg->gadget = gadget; + if (otg->state == OTG_STATE_B_PERIPHERAL) + atomic_notifier_call_chain(&otg->usb_phy->notifier, + USB_EVENT_VBUS, otg->gadget); + else + otg->state = OTG_STATE_B_IDLE; + return 0; +} + +static int nop_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + if (!otg) + return -ENODEV; + + if (!host) { + otg->host = NULL; + return -ENODEV; + } + + otg->host = host; + return 0; +} + +int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop) +{ + enum usb_phy_type type = USB_PHY_TYPE_USB2; + int err = 0; + + u32 clk_rate = 0; + bool needs_clk = false; + + if (dev->of_node) { + struct device_node *node = dev->of_node; + + if (of_property_read_u32(node, "clock-frequency", &clk_rate)) + clk_rate = 0; + + needs_clk = of_property_read_bool(node, "clocks"); + } + nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset", + GPIOD_ASIS); + err = PTR_ERR_OR_ZERO(nop->gpiod_reset); + if (!err) { + nop->gpiod_vbus = devm_gpiod_get_optional(dev, + "vbus-detect", + GPIOD_ASIS); + err = PTR_ERR_OR_ZERO(nop->gpiod_vbus); + } + + if (err) + return dev_err_probe(dev, err, + "Error requesting RESET or VBUS GPIO\n"); + if (nop->gpiod_reset) + gpiod_direction_output(nop->gpiod_reset, 1); + + nop->phy.otg = devm_kzalloc(dev, sizeof(*nop->phy.otg), + GFP_KERNEL); + if (!nop->phy.otg) + return -ENOMEM; + + nop->clk = devm_clk_get(dev, "main_clk"); + if (IS_ERR(nop->clk)) { + dev_dbg(dev, "Can't get phy clock: %ld\n", + PTR_ERR(nop->clk)); + if (needs_clk) + return PTR_ERR(nop->clk); + } + + if (!IS_ERR(nop->clk) && clk_rate) { + err = clk_set_rate(nop->clk, clk_rate); + if (err) { + dev_err(dev, "Error setting clock rate\n"); + return err; + } + } + + nop->vcc = devm_regulator_get_optional(dev, "vcc"); + if (IS_ERR(nop->vcc) && PTR_ERR(nop->vcc) != -ENODEV) + return dev_err_probe(dev, PTR_ERR(nop->vcc), + "could not get vcc regulator\n"); + + nop->vbus_draw = devm_regulator_get_exclusive(dev, "vbus"); + if (PTR_ERR(nop->vbus_draw) == -ENODEV) + nop->vbus_draw = NULL; + if (IS_ERR(nop->vbus_draw)) + return dev_err_probe(dev, PTR_ERR(nop->vbus_draw), + "could not get vbus regulator\n"); + + nop->dev = dev; + nop->phy.dev = nop->dev; + nop->phy.label = "nop-xceiv"; + nop->phy.set_suspend = nop_set_suspend; + nop->phy.type = type; + + nop->phy.otg->state = OTG_STATE_UNDEFINED; + nop->phy.otg->usb_phy = &nop->phy; + nop->phy.otg->set_host = nop_set_host; + nop->phy.otg->set_peripheral = nop_set_peripheral; + + return 0; +} +EXPORT_SYMBOL_GPL(usb_phy_gen_create_phy); + +static int usb_phy_generic_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *dn = dev->of_node; + struct usb_phy_generic *nop; + int err; + + nop = devm_kzalloc(dev, sizeof(*nop), GFP_KERNEL); + if (!nop) + return -ENOMEM; + + err = usb_phy_gen_create_phy(dev, nop); + if (err) + return err; + if (nop->gpiod_vbus) { + err = devm_request_threaded_irq(&pdev->dev, + gpiod_to_irq(nop->gpiod_vbus), + NULL, nop_gpio_vbus_thread, + VBUS_IRQ_FLAGS, "vbus_detect", + nop); + if (err) { + dev_err(&pdev->dev, "can't request irq %i, err: %d\n", + gpiod_to_irq(nop->gpiod_vbus), err); + return err; + } + nop->phy.otg->state = gpiod_get_value(nop->gpiod_vbus) ? + OTG_STATE_B_PERIPHERAL : OTG_STATE_B_IDLE; + } + + nop->phy.init = usb_gen_phy_init; + nop->phy.shutdown = usb_gen_phy_shutdown; + + err = usb_add_phy_dev(&nop->phy); + if (err) { + dev_err(&pdev->dev, "can't register transceiver, err: %d\n", + err); + return err; + } + + platform_set_drvdata(pdev, nop); + + device_set_wakeup_capable(&pdev->dev, + of_property_read_bool(dn, "wakeup-source")); + + return 0; +} + +static int usb_phy_generic_remove(struct platform_device *pdev) +{ + struct usb_phy_generic *nop = platform_get_drvdata(pdev); + + usb_remove_phy(&nop->phy); + + return 0; +} + +static const struct of_device_id nop_xceiv_dt_ids[] = { + { .compatible = "usb-nop-xceiv" }, + { } +}; + +MODULE_DEVICE_TABLE(of, nop_xceiv_dt_ids); + +static struct platform_driver usb_phy_generic_driver = { + .probe = usb_phy_generic_probe, + .remove = usb_phy_generic_remove, + .driver = { + .name = "usb_phy_generic", + .of_match_table = nop_xceiv_dt_ids, + }, +}; + +static int __init usb_phy_generic_init(void) +{ + return platform_driver_register(&usb_phy_generic_driver); +} +subsys_initcall(usb_phy_generic_init); + +static void __exit usb_phy_generic_exit(void) +{ + platform_driver_unregister(&usb_phy_generic_driver); +} +module_exit(usb_phy_generic_exit); + +MODULE_ALIAS("platform:usb_phy_generic"); +MODULE_AUTHOR("Texas Instruments Inc"); +MODULE_DESCRIPTION("NOP USB Transceiver driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3