From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/usb/renesas_usbhs/pipe.c | 851 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 851 insertions(+) create mode 100644 drivers/usb/renesas_usbhs/pipe.c (limited to 'drivers/usb/renesas_usbhs/pipe.c') diff --git a/drivers/usb/renesas_usbhs/pipe.c b/drivers/usb/renesas_usbhs/pipe.c new file mode 100644 index 000000000..75fff2e4c --- /dev/null +++ b/drivers/usb/renesas_usbhs/pipe.c @@ -0,0 +1,851 @@ +// SPDX-License-Identifier: GPL-1.0+ +/* + * Renesas USB driver + * + * Copyright (C) 2011 Renesas Solutions Corp. + * Kuninori Morimoto + */ +#include +#include +#include "common.h" +#include "pipe.h" + +/* + * macros + */ +#define usbhsp_addr_offset(p) ((usbhs_pipe_number(p) - 1) * 2) + +#define usbhsp_flags_set(p, f) ((p)->flags |= USBHS_PIPE_FLAGS_##f) +#define usbhsp_flags_clr(p, f) ((p)->flags &= ~USBHS_PIPE_FLAGS_##f) +#define usbhsp_flags_has(p, f) ((p)->flags & USBHS_PIPE_FLAGS_##f) +#define usbhsp_flags_init(p) do {(p)->flags = 0; } while (0) + +/* + * for debug + */ +static char *usbhsp_pipe_name[] = { + [USB_ENDPOINT_XFER_CONTROL] = "DCP", + [USB_ENDPOINT_XFER_BULK] = "BULK", + [USB_ENDPOINT_XFER_INT] = "INT", + [USB_ENDPOINT_XFER_ISOC] = "ISO", +}; + +char *usbhs_pipe_name(struct usbhs_pipe *pipe) +{ + return usbhsp_pipe_name[usbhs_pipe_type(pipe)]; +} + +static struct renesas_usbhs_driver_pipe_config +*usbhsp_get_pipe_config(struct usbhs_priv *priv, int pipe_num) +{ + struct renesas_usbhs_driver_pipe_config *pipe_configs = + usbhs_get_dparam(priv, pipe_configs); + + return &pipe_configs[pipe_num]; +} + +/* + * DCPCTR/PIPEnCTR functions + */ +static void usbhsp_pipectrl_set(struct usbhs_pipe *pipe, u16 mask, u16 val) +{ + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + int offset = usbhsp_addr_offset(pipe); + + if (usbhs_pipe_is_dcp(pipe)) + usbhs_bset(priv, DCPCTR, mask, val); + else + usbhs_bset(priv, PIPEnCTR + offset, mask, val); +} + +static u16 usbhsp_pipectrl_get(struct usbhs_pipe *pipe) +{ + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + int offset = usbhsp_addr_offset(pipe); + + if (usbhs_pipe_is_dcp(pipe)) + return usbhs_read(priv, DCPCTR); + else + return usbhs_read(priv, PIPEnCTR + offset); +} + +/* + * DCP/PIPE functions + */ +static void __usbhsp_pipe_xxx_set(struct usbhs_pipe *pipe, + u16 dcp_reg, u16 pipe_reg, + u16 mask, u16 val) +{ + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + + if (usbhs_pipe_is_dcp(pipe)) + usbhs_bset(priv, dcp_reg, mask, val); + else + usbhs_bset(priv, pipe_reg, mask, val); +} + +static u16 __usbhsp_pipe_xxx_get(struct usbhs_pipe *pipe, + u16 dcp_reg, u16 pipe_reg) +{ + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + + if (usbhs_pipe_is_dcp(pipe)) + return usbhs_read(priv, dcp_reg); + else + return usbhs_read(priv, pipe_reg); +} + +/* + * DCPCFG/PIPECFG functions + */ +static void usbhsp_pipe_cfg_set(struct usbhs_pipe *pipe, u16 mask, u16 val) +{ + __usbhsp_pipe_xxx_set(pipe, DCPCFG, PIPECFG, mask, val); +} + +static u16 usbhsp_pipe_cfg_get(struct usbhs_pipe *pipe) +{ + return __usbhsp_pipe_xxx_get(pipe, DCPCFG, PIPECFG); +} + +/* + * PIPEnTRN/PIPEnTRE functions + */ +static void usbhsp_pipe_trn_set(struct usbhs_pipe *pipe, u16 mask, u16 val) +{ + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + struct device *dev = usbhs_priv_to_dev(priv); + int num = usbhs_pipe_number(pipe); + u16 reg; + + /* + * It is impossible to calculate address, + * since PIPEnTRN addresses were mapped randomly. + */ +#define CASE_PIPExTRN(a) \ + case 0x ## a: \ + reg = PIPE ## a ## TRN; \ + break; + + switch (num) { + CASE_PIPExTRN(1); + CASE_PIPExTRN(2); + CASE_PIPExTRN(3); + CASE_PIPExTRN(4); + CASE_PIPExTRN(5); + CASE_PIPExTRN(B); + CASE_PIPExTRN(C); + CASE_PIPExTRN(D); + CASE_PIPExTRN(E); + CASE_PIPExTRN(F); + CASE_PIPExTRN(9); + CASE_PIPExTRN(A); + default: + dev_err(dev, "unknown pipe (%d)\n", num); + return; + } + __usbhsp_pipe_xxx_set(pipe, 0, reg, mask, val); +} + +static void usbhsp_pipe_tre_set(struct usbhs_pipe *pipe, u16 mask, u16 val) +{ + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + struct device *dev = usbhs_priv_to_dev(priv); + int num = usbhs_pipe_number(pipe); + u16 reg; + + /* + * It is impossible to calculate address, + * since PIPEnTRE addresses were mapped randomly. + */ +#define CASE_PIPExTRE(a) \ + case 0x ## a: \ + reg = PIPE ## a ## TRE; \ + break; + + switch (num) { + CASE_PIPExTRE(1); + CASE_PIPExTRE(2); + CASE_PIPExTRE(3); + CASE_PIPExTRE(4); + CASE_PIPExTRE(5); + CASE_PIPExTRE(B); + CASE_PIPExTRE(C); + CASE_PIPExTRE(D); + CASE_PIPExTRE(E); + CASE_PIPExTRE(F); + CASE_PIPExTRE(9); + CASE_PIPExTRE(A); + default: + dev_err(dev, "unknown pipe (%d)\n", num); + return; + } + + __usbhsp_pipe_xxx_set(pipe, 0, reg, mask, val); +} + +/* + * PIPEBUF + */ +static void usbhsp_pipe_buf_set(struct usbhs_pipe *pipe, u16 mask, u16 val) +{ + if (usbhs_pipe_is_dcp(pipe)) + return; + + __usbhsp_pipe_xxx_set(pipe, 0, PIPEBUF, mask, val); +} + +/* + * DCPMAXP/PIPEMAXP + */ +static void usbhsp_pipe_maxp_set(struct usbhs_pipe *pipe, u16 mask, u16 val) +{ + __usbhsp_pipe_xxx_set(pipe, DCPMAXP, PIPEMAXP, mask, val); +} + +/* + * pipe control functions + */ +static void usbhsp_pipe_select(struct usbhs_pipe *pipe) +{ + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + + /* + * On pipe, this is necessary before + * accesses to below registers. + * + * PIPESEL : usbhsp_pipe_select + * PIPECFG : usbhsp_pipe_cfg_xxx + * PIPEBUF : usbhsp_pipe_buf_xxx + * PIPEMAXP : usbhsp_pipe_maxp_xxx + * PIPEPERI + */ + + /* + * if pipe is dcp, no pipe is selected. + * it is no problem, because dcp have its register + */ + usbhs_write(priv, PIPESEL, 0xF & usbhs_pipe_number(pipe)); +} + +static int usbhsp_pipe_barrier(struct usbhs_pipe *pipe) +{ + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + int timeout = 1024; + u16 mask = usbhs_mod_is_host(priv) ? (CSSTS | PID_MASK) : PID_MASK; + + /* + * make sure.... + * + * Modify these bits when CSSTS = 0, PID = NAK, and no pipe number is + * specified by the CURPIPE bits. + * When changing the setting of this bit after changing + * the PID bits for the selected pipe from BUF to NAK, + * check that CSSTS = 0 and PBUSY = 0. + */ + + /* + * CURPIPE bit = 0 + * + * see also + * "Operation" + * - "Pipe Control" + * - "Pipe Control Registers Switching Procedure" + */ + usbhs_write(priv, CFIFOSEL, 0); + usbhs_pipe_disable(pipe); + + do { + if (!(usbhsp_pipectrl_get(pipe) & mask)) + return 0; + + udelay(10); + + } while (timeout--); + + return -EBUSY; +} + +int usbhs_pipe_is_accessible(struct usbhs_pipe *pipe) +{ + u16 val; + + val = usbhsp_pipectrl_get(pipe); + if (val & BSTS) + return 0; + + return -EBUSY; +} + +bool usbhs_pipe_contains_transmittable_data(struct usbhs_pipe *pipe) +{ + u16 val; + + /* Do not support for DCP pipe */ + if (usbhs_pipe_is_dcp(pipe)) + return false; + + val = usbhsp_pipectrl_get(pipe); + if (val & INBUFM) + return true; + + return false; +} + +/* + * PID ctrl + */ +static void __usbhsp_pid_try_nak_if_stall(struct usbhs_pipe *pipe) +{ + u16 pid = usbhsp_pipectrl_get(pipe); + + pid &= PID_MASK; + + /* + * see + * "Pipe n Control Register" - "PID" + */ + switch (pid) { + case PID_STALL11: + usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL10); + fallthrough; + case PID_STALL10: + usbhsp_pipectrl_set(pipe, PID_MASK, PID_NAK); + } +} + +void usbhs_pipe_disable(struct usbhs_pipe *pipe) +{ + int timeout = 1024; + u16 val; + + /* see "Pipe n Control Register" - "PID" */ + __usbhsp_pid_try_nak_if_stall(pipe); + + usbhsp_pipectrl_set(pipe, PID_MASK, PID_NAK); + + do { + val = usbhsp_pipectrl_get(pipe); + val &= PBUSY; + if (!val) + break; + + udelay(10); + } while (timeout--); +} + +void usbhs_pipe_enable(struct usbhs_pipe *pipe) +{ + /* see "Pipe n Control Register" - "PID" */ + __usbhsp_pid_try_nak_if_stall(pipe); + + usbhsp_pipectrl_set(pipe, PID_MASK, PID_BUF); +} + +void usbhs_pipe_stall(struct usbhs_pipe *pipe) +{ + u16 pid = usbhsp_pipectrl_get(pipe); + + pid &= PID_MASK; + + /* + * see + * "Pipe n Control Register" - "PID" + */ + switch (pid) { + case PID_NAK: + usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL10); + break; + case PID_BUF: + usbhsp_pipectrl_set(pipe, PID_MASK, PID_STALL11); + break; + } +} + +int usbhs_pipe_is_stall(struct usbhs_pipe *pipe) +{ + u16 pid = usbhsp_pipectrl_get(pipe) & PID_MASK; + + return (int)(pid == PID_STALL10 || pid == PID_STALL11); +} + +void usbhs_pipe_set_trans_count_if_bulk(struct usbhs_pipe *pipe, int len) +{ + if (!usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK)) + return; + + /* + * clear and disable transfer counter for IN/OUT pipe + */ + usbhsp_pipe_tre_set(pipe, TRCLR | TRENB, TRCLR); + + /* + * Only IN direction bulk pipe can use transfer count. + * Without using this function, + * received data will break if it was large data size. + * see PIPEnTRN/PIPEnTRE for detail + */ + if (usbhs_pipe_is_dir_in(pipe)) { + int maxp = usbhs_pipe_get_maxpacket(pipe); + + usbhsp_pipe_trn_set(pipe, 0xffff, DIV_ROUND_UP(len, maxp)); + usbhsp_pipe_tre_set(pipe, TRENB, TRENB); /* enable */ + } +} + + +/* + * pipe setup + */ +static int usbhsp_setup_pipecfg(struct usbhs_pipe *pipe, int is_host, + int dir_in, u16 *pipecfg) +{ + u16 type = 0; + u16 bfre = 0; + u16 dblb = 0; + u16 cntmd = 0; + u16 dir = 0; + u16 epnum = 0; + u16 shtnak = 0; + static const u16 type_array[] = { + [USB_ENDPOINT_XFER_BULK] = TYPE_BULK, + [USB_ENDPOINT_XFER_INT] = TYPE_INT, + [USB_ENDPOINT_XFER_ISOC] = TYPE_ISO, + }; + + if (usbhs_pipe_is_dcp(pipe)) + return -EINVAL; + + /* + * PIPECFG + * + * see + * - "Register Descriptions" - "PIPECFG" register + * - "Features" - "Pipe configuration" + * - "Operation" - "Pipe Control" + */ + + /* TYPE */ + type = type_array[usbhs_pipe_type(pipe)]; + + /* BFRE */ + if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC) || + usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK)) + bfre = 0; /* FIXME */ + + /* DBLB: see usbhs_pipe_config_update() */ + + /* CNTMD */ + if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK)) + cntmd = 0; /* FIXME */ + + /* DIR */ + if (dir_in) + usbhsp_flags_set(pipe, IS_DIR_HOST); + + if (!!is_host ^ !!dir_in) + dir |= DIR_OUT; + + if (!dir) + usbhsp_flags_set(pipe, IS_DIR_IN); + + /* SHTNAK */ + if (usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_BULK) && + !dir) + shtnak = SHTNAK; + + /* EPNUM */ + epnum = 0; /* see usbhs_pipe_config_update() */ + *pipecfg = type | + bfre | + dblb | + cntmd | + dir | + shtnak | + epnum; + return 0; +} + +static u16 usbhsp_setup_pipebuff(struct usbhs_pipe *pipe) +{ + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + struct device *dev = usbhs_priv_to_dev(priv); + int pipe_num = usbhs_pipe_number(pipe); + u16 buff_size; + u16 bufnmb; + u16 bufnmb_cnt; + struct renesas_usbhs_driver_pipe_config *pipe_config = + usbhsp_get_pipe_config(priv, pipe_num); + + /* + * PIPEBUF + * + * see + * - "Register Descriptions" - "PIPEBUF" register + * - "Features" - "Pipe configuration" + * - "Operation" - "FIFO Buffer Memory" + * - "Operation" - "Pipe Control" + */ + buff_size = pipe_config->bufsize; + bufnmb = pipe_config->bufnum; + + /* change buff_size to register value */ + bufnmb_cnt = (buff_size / 64) - 1; + + dev_dbg(dev, "pipe : %d : buff_size 0x%x: bufnmb 0x%x\n", + pipe_num, buff_size, bufnmb); + + return (0x1f & bufnmb_cnt) << 10 | + (0xff & bufnmb) << 0; +} + +void usbhs_pipe_config_update(struct usbhs_pipe *pipe, u16 devsel, + u16 epnum, u16 maxp) +{ + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + int pipe_num = usbhs_pipe_number(pipe); + struct renesas_usbhs_driver_pipe_config *pipe_config = + usbhsp_get_pipe_config(priv, pipe_num); + u16 dblb = pipe_config->double_buf ? DBLB : 0; + + if (devsel > 0xA) { + struct device *dev = usbhs_priv_to_dev(priv); + + dev_err(dev, "devsel error %d\n", devsel); + + devsel = 0; + } + + usbhsp_pipe_barrier(pipe); + + pipe->maxp = maxp; + + usbhsp_pipe_select(pipe); + usbhsp_pipe_maxp_set(pipe, 0xFFFF, + (devsel << 12) | + maxp); + + if (!usbhs_pipe_is_dcp(pipe)) + usbhsp_pipe_cfg_set(pipe, 0x000F | DBLB, epnum | dblb); +} + +/* + * pipe control + */ +int usbhs_pipe_get_maxpacket(struct usbhs_pipe *pipe) +{ + /* + * see + * usbhs_pipe_config_update() + * usbhs_dcp_malloc() + */ + return pipe->maxp; +} + +int usbhs_pipe_is_dir_in(struct usbhs_pipe *pipe) +{ + return usbhsp_flags_has(pipe, IS_DIR_IN); +} + +int usbhs_pipe_is_dir_host(struct usbhs_pipe *pipe) +{ + return usbhsp_flags_has(pipe, IS_DIR_HOST); +} + +int usbhs_pipe_is_running(struct usbhs_pipe *pipe) +{ + return usbhsp_flags_has(pipe, IS_RUNNING); +} + +void usbhs_pipe_running(struct usbhs_pipe *pipe, int running) +{ + if (running) + usbhsp_flags_set(pipe, IS_RUNNING); + else + usbhsp_flags_clr(pipe, IS_RUNNING); +} + +void usbhs_pipe_data_sequence(struct usbhs_pipe *pipe, int sequence) +{ + u16 mask = (SQCLR | SQSET); + u16 val; + + /* + * sequence + * 0 : data0 + * 1 : data1 + * -1 : no change + */ + switch (sequence) { + case 0: + val = SQCLR; + break; + case 1: + val = SQSET; + break; + default: + return; + } + + usbhsp_pipectrl_set(pipe, mask, val); +} + +static int usbhs_pipe_get_data_sequence(struct usbhs_pipe *pipe) +{ + return !!(usbhsp_pipectrl_get(pipe) & SQMON); +} + +void usbhs_pipe_clear(struct usbhs_pipe *pipe) +{ + if (usbhs_pipe_is_dcp(pipe)) { + usbhs_fifo_clear_dcp(pipe); + } else { + usbhsp_pipectrl_set(pipe, ACLRM, ACLRM); + usbhsp_pipectrl_set(pipe, ACLRM, 0); + } +} + +/* Should call usbhsp_pipe_select() before */ +void usbhs_pipe_clear_without_sequence(struct usbhs_pipe *pipe, + int needs_bfre, int bfre_enable) +{ + int sequence; + + usbhsp_pipe_select(pipe); + sequence = usbhs_pipe_get_data_sequence(pipe); + if (needs_bfre) + usbhsp_pipe_cfg_set(pipe, BFRE, bfre_enable ? BFRE : 0); + usbhs_pipe_clear(pipe); + usbhs_pipe_data_sequence(pipe, sequence); +} + +void usbhs_pipe_config_change_bfre(struct usbhs_pipe *pipe, int enable) +{ + if (usbhs_pipe_is_dcp(pipe)) + return; + + usbhsp_pipe_select(pipe); + /* check if the driver needs to change the BFRE value */ + if (!(enable ^ !!(usbhsp_pipe_cfg_get(pipe) & BFRE))) + return; + + usbhs_pipe_clear_without_sequence(pipe, 1, enable); +} + +static struct usbhs_pipe *usbhsp_get_pipe(struct usbhs_priv *priv, u32 type) +{ + struct usbhs_pipe *pos, *pipe; + int i; + + /* + * find target pipe + */ + pipe = NULL; + usbhs_for_each_pipe_with_dcp(pos, priv, i) { + if (!usbhs_pipe_type_is(pos, type)) + continue; + if (usbhsp_flags_has(pos, IS_USED)) + continue; + + pipe = pos; + break; + } + + if (!pipe) + return NULL; + + /* + * initialize pipe flags + */ + usbhsp_flags_init(pipe); + usbhsp_flags_set(pipe, IS_USED); + + return pipe; +} + +static void usbhsp_put_pipe(struct usbhs_pipe *pipe) +{ + usbhsp_flags_init(pipe); +} + +void usbhs_pipe_init(struct usbhs_priv *priv, + int (*dma_map_ctrl)(struct device *dma_dev, + struct usbhs_pkt *pkt, int map)) +{ + struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv); + struct usbhs_pipe *pipe; + int i; + + usbhs_for_each_pipe_with_dcp(pipe, priv, i) { + usbhsp_flags_init(pipe); + pipe->fifo = NULL; + pipe->mod_private = NULL; + INIT_LIST_HEAD(&pipe->list); + + /* pipe force init */ + usbhs_pipe_clear(pipe); + } + + info->dma_map_ctrl = dma_map_ctrl; +} + +struct usbhs_pipe *usbhs_pipe_malloc(struct usbhs_priv *priv, + int endpoint_type, + int dir_in) +{ + struct device *dev = usbhs_priv_to_dev(priv); + struct usbhs_pipe *pipe; + int is_host = usbhs_mod_is_host(priv); + int ret; + u16 pipecfg, pipebuf; + + pipe = usbhsp_get_pipe(priv, endpoint_type); + if (!pipe) { + dev_err(dev, "can't get pipe (%s)\n", + usbhsp_pipe_name[endpoint_type]); + return NULL; + } + + INIT_LIST_HEAD(&pipe->list); + + usbhs_pipe_disable(pipe); + + /* make sure pipe is not busy */ + ret = usbhsp_pipe_barrier(pipe); + if (ret < 0) { + dev_err(dev, "pipe setup failed %d\n", usbhs_pipe_number(pipe)); + return NULL; + } + + if (usbhsp_setup_pipecfg(pipe, is_host, dir_in, &pipecfg)) { + dev_err(dev, "can't setup pipe\n"); + return NULL; + } + + pipebuf = usbhsp_setup_pipebuff(pipe); + + usbhsp_pipe_select(pipe); + usbhsp_pipe_cfg_set(pipe, 0xFFFF, pipecfg); + usbhsp_pipe_buf_set(pipe, 0xFFFF, pipebuf); + usbhs_pipe_clear(pipe); + + usbhs_pipe_sequence_data0(pipe); + + dev_dbg(dev, "enable pipe %d : %s (%s)\n", + usbhs_pipe_number(pipe), + usbhs_pipe_name(pipe), + usbhs_pipe_is_dir_in(pipe) ? "in" : "out"); + + /* + * epnum / maxp are still not set to this pipe. + * call usbhs_pipe_config_update() after this function !! + */ + + return pipe; +} + +void usbhs_pipe_free(struct usbhs_pipe *pipe) +{ + usbhsp_pipe_select(pipe); + usbhsp_pipe_cfg_set(pipe, 0xFFFF, 0); + usbhsp_put_pipe(pipe); +} + +void usbhs_pipe_select_fifo(struct usbhs_pipe *pipe, struct usbhs_fifo *fifo) +{ + if (pipe->fifo) + pipe->fifo->pipe = NULL; + + pipe->fifo = fifo; + + if (fifo) + fifo->pipe = pipe; +} + + +/* + * dcp control + */ +struct usbhs_pipe *usbhs_dcp_malloc(struct usbhs_priv *priv) +{ + struct usbhs_pipe *pipe; + + pipe = usbhsp_get_pipe(priv, USB_ENDPOINT_XFER_CONTROL); + if (!pipe) + return NULL; + + INIT_LIST_HEAD(&pipe->list); + + /* + * call usbhs_pipe_config_update() after this function !! + */ + + return pipe; +} + +void usbhs_dcp_control_transfer_done(struct usbhs_pipe *pipe) +{ + struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); + + WARN_ON(!usbhs_pipe_is_dcp(pipe)); + + usbhs_pipe_enable(pipe); + + if (!usbhs_mod_is_host(priv)) /* funconly */ + usbhsp_pipectrl_set(pipe, CCPL, CCPL); +} + +void usbhs_dcp_dir_for_host(struct usbhs_pipe *pipe, int dir_out) +{ + usbhsp_pipe_cfg_set(pipe, DIR_OUT, + dir_out ? DIR_OUT : 0); +} + +/* + * pipe module function + */ +int usbhs_pipe_probe(struct usbhs_priv *priv) +{ + struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv); + struct usbhs_pipe *pipe; + struct device *dev = usbhs_priv_to_dev(priv); + struct renesas_usbhs_driver_pipe_config *pipe_configs = + usbhs_get_dparam(priv, pipe_configs); + int pipe_size = usbhs_get_dparam(priv, pipe_size); + int i; + + /* This driver expects 1st pipe is DCP */ + if (pipe_configs[0].type != USB_ENDPOINT_XFER_CONTROL) { + dev_err(dev, "1st PIPE is not DCP\n"); + return -EINVAL; + } + + info->pipe = kcalloc(pipe_size, sizeof(struct usbhs_pipe), + GFP_KERNEL); + if (!info->pipe) + return -ENOMEM; + + info->size = pipe_size; + + /* + * init pipe + */ + usbhs_for_each_pipe_with_dcp(pipe, priv, i) { + pipe->priv = priv; + + usbhs_pipe_type(pipe) = + pipe_configs[i].type & USB_ENDPOINT_XFERTYPE_MASK; + + dev_dbg(dev, "pipe %x\t: %s\n", + i, usbhsp_pipe_name[pipe_configs[i].type]); + } + + return 0; +} + +void usbhs_pipe_remove(struct usbhs_priv *priv) +{ + struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv); + + kfree(info->pipe); +} -- cgit v1.2.3