From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/usb/serial/upd78f0730.c | 432 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 432 insertions(+) create mode 100644 drivers/usb/serial/upd78f0730.c (limited to 'drivers/usb/serial/upd78f0730.c') diff --git a/drivers/usb/serial/upd78f0730.c b/drivers/usb/serial/upd78f0730.c new file mode 100644 index 000000000..c47439bd9 --- /dev/null +++ b/drivers/usb/serial/upd78f0730.c @@ -0,0 +1,432 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Renesas Electronics uPD78F0730 USB to serial converter driver + * + * Copyright (C) 2014,2016 Maksim Salau + * + * Protocol of the adaptor is described in the application note U19660EJ1V0AN00 + * μPD78F0730 8-bit Single-Chip Microcontroller + * USB-to-Serial Conversion Software + * + * + * The adaptor functionality is limited to the following: + * - data bits: 7 or 8 + * - stop bits: 1 or 2 + * - parity: even, odd or none + * - flow control: none + * - baud rates: 0, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 153600 + * - signals: DTR, RTS and BREAK + */ + +#include +#include +#include +#include +#include + +#define DRIVER_DESC "Renesas uPD78F0730 USB to serial converter driver" + +#define DRIVER_AUTHOR "Maksim Salau " + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(0x0409, 0x0063) }, /* V850ESJX3-STICK */ + { USB_DEVICE(0x045B, 0x0212) }, /* YRPBRL78G13, YRPBRL78G14 */ + { USB_DEVICE(0x064B, 0x7825) }, /* Analog Devices EVAL-ADXL362Z-DB */ + {} +}; + +MODULE_DEVICE_TABLE(usb, id_table); + +/* + * Each adaptor is associated with a private structure, that holds the current + * state of control signals (DTR, RTS and BREAK). + */ +struct upd78f0730_port_private { + struct mutex lock; /* mutex to protect line_signals */ + u8 line_signals; +}; + +/* Op-codes of control commands */ +#define UPD78F0730_CMD_LINE_CONTROL 0x00 +#define UPD78F0730_CMD_SET_DTR_RTS 0x01 +#define UPD78F0730_CMD_SET_XON_XOFF_CHR 0x02 +#define UPD78F0730_CMD_OPEN_CLOSE 0x03 +#define UPD78F0730_CMD_SET_ERR_CHR 0x04 + +/* Data sizes in UPD78F0730_CMD_LINE_CONTROL command */ +#define UPD78F0730_DATA_SIZE_7_BITS 0x00 +#define UPD78F0730_DATA_SIZE_8_BITS 0x01 +#define UPD78F0730_DATA_SIZE_MASK 0x01 + +/* Stop-bit modes in UPD78F0730_CMD_LINE_CONTROL command */ +#define UPD78F0730_STOP_BIT_1_BIT 0x00 +#define UPD78F0730_STOP_BIT_2_BIT 0x02 +#define UPD78F0730_STOP_BIT_MASK 0x02 + +/* Parity modes in UPD78F0730_CMD_LINE_CONTROL command */ +#define UPD78F0730_PARITY_NONE 0x00 +#define UPD78F0730_PARITY_EVEN 0x04 +#define UPD78F0730_PARITY_ODD 0x08 +#define UPD78F0730_PARITY_MASK 0x0C + +/* Flow control modes in UPD78F0730_CMD_LINE_CONTROL command */ +#define UPD78F0730_FLOW_CONTROL_NONE 0x00 +#define UPD78F0730_FLOW_CONTROL_HW 0x10 +#define UPD78F0730_FLOW_CONTROL_SW 0x20 +#define UPD78F0730_FLOW_CONTROL_MASK 0x30 + +/* Control signal bits in UPD78F0730_CMD_SET_DTR_RTS command */ +#define UPD78F0730_RTS 0x01 +#define UPD78F0730_DTR 0x02 +#define UPD78F0730_BREAK 0x04 + +/* Port modes in UPD78F0730_CMD_OPEN_CLOSE command */ +#define UPD78F0730_PORT_CLOSE 0x00 +#define UPD78F0730_PORT_OPEN 0x01 + +/* Error character substitution modes in UPD78F0730_CMD_SET_ERR_CHR command */ +#define UPD78F0730_ERR_CHR_DISABLED 0x00 +#define UPD78F0730_ERR_CHR_ENABLED 0x01 + +/* + * Declaration of command structures + */ + +/* UPD78F0730_CMD_LINE_CONTROL command */ +struct upd78f0730_line_control { + u8 opcode; + __le32 baud_rate; + u8 params; +} __packed; + +/* UPD78F0730_CMD_SET_DTR_RTS command */ +struct upd78f0730_set_dtr_rts { + u8 opcode; + u8 params; +}; + +/* UPD78F0730_CMD_SET_XON_OFF_CHR command */ +struct upd78f0730_set_xon_xoff_chr { + u8 opcode; + u8 xon; + u8 xoff; +}; + +/* UPD78F0730_CMD_OPEN_CLOSE command */ +struct upd78f0730_open_close { + u8 opcode; + u8 state; +}; + +/* UPD78F0730_CMD_SET_ERR_CHR command */ +struct upd78f0730_set_err_chr { + u8 opcode; + u8 state; + u8 err_char; +}; + +static int upd78f0730_send_ctl(struct usb_serial_port *port, + const void *data, int size) +{ + struct usb_device *usbdev = port->serial->dev; + void *buf; + int res; + + if (size <= 0 || !data) + return -EINVAL; + + buf = kmemdup(data, size, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + res = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0), 0x00, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT, + 0x0000, 0x0000, buf, size, USB_CTRL_SET_TIMEOUT); + + kfree(buf); + + if (res < 0) { + struct device *dev = &port->dev; + + dev_err(dev, "failed to send control request %02x: %d\n", + *(u8 *)data, res); + + return res; + } + + return 0; +} + +static int upd78f0730_port_probe(struct usb_serial_port *port) +{ + struct upd78f0730_port_private *private; + + private = kzalloc(sizeof(*private), GFP_KERNEL); + if (!private) + return -ENOMEM; + + mutex_init(&private->lock); + usb_set_serial_port_data(port, private); + + return 0; +} + +static void upd78f0730_port_remove(struct usb_serial_port *port) +{ + struct upd78f0730_port_private *private; + + private = usb_get_serial_port_data(port); + mutex_destroy(&private->lock); + kfree(private); +} + +static int upd78f0730_tiocmget(struct tty_struct *tty) +{ + struct upd78f0730_port_private *private; + struct usb_serial_port *port = tty->driver_data; + int signals; + int res; + + private = usb_get_serial_port_data(port); + + mutex_lock(&private->lock); + signals = private->line_signals; + mutex_unlock(&private->lock); + + res = ((signals & UPD78F0730_DTR) ? TIOCM_DTR : 0) | + ((signals & UPD78F0730_RTS) ? TIOCM_RTS : 0); + + dev_dbg(&port->dev, "%s - res = %x\n", __func__, res); + + return res; +} + +static int upd78f0730_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct upd78f0730_port_private *private; + struct upd78f0730_set_dtr_rts request; + struct device *dev = &port->dev; + int res; + + private = usb_get_serial_port_data(port); + + mutex_lock(&private->lock); + if (set & TIOCM_DTR) { + private->line_signals |= UPD78F0730_DTR; + dev_dbg(dev, "%s - set DTR\n", __func__); + } + if (set & TIOCM_RTS) { + private->line_signals |= UPD78F0730_RTS; + dev_dbg(dev, "%s - set RTS\n", __func__); + } + if (clear & TIOCM_DTR) { + private->line_signals &= ~UPD78F0730_DTR; + dev_dbg(dev, "%s - clear DTR\n", __func__); + } + if (clear & TIOCM_RTS) { + private->line_signals &= ~UPD78F0730_RTS; + dev_dbg(dev, "%s - clear RTS\n", __func__); + } + request.opcode = UPD78F0730_CMD_SET_DTR_RTS; + request.params = private->line_signals; + + res = upd78f0730_send_ctl(port, &request, sizeof(request)); + mutex_unlock(&private->lock); + + return res; +} + +static void upd78f0730_break_ctl(struct tty_struct *tty, int break_state) +{ + struct upd78f0730_port_private *private; + struct usb_serial_port *port = tty->driver_data; + struct upd78f0730_set_dtr_rts request; + struct device *dev = &port->dev; + + private = usb_get_serial_port_data(port); + + mutex_lock(&private->lock); + if (break_state) { + private->line_signals |= UPD78F0730_BREAK; + dev_dbg(dev, "%s - set BREAK\n", __func__); + } else { + private->line_signals &= ~UPD78F0730_BREAK; + dev_dbg(dev, "%s - clear BREAK\n", __func__); + } + request.opcode = UPD78F0730_CMD_SET_DTR_RTS; + request.params = private->line_signals; + + upd78f0730_send_ctl(port, &request, sizeof(request)); + mutex_unlock(&private->lock); +} + +static void upd78f0730_dtr_rts(struct usb_serial_port *port, int on) +{ + struct tty_struct *tty = port->port.tty; + unsigned int set = 0; + unsigned int clear = 0; + + if (on) + set = TIOCM_DTR | TIOCM_RTS; + else + clear = TIOCM_DTR | TIOCM_RTS; + + upd78f0730_tiocmset(tty, set, clear); +} + +static speed_t upd78f0730_get_baud_rate(struct tty_struct *tty) +{ + const speed_t baud_rate = tty_get_baud_rate(tty); + static const speed_t supported[] = { + 0, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 153600 + }; + int i; + + for (i = ARRAY_SIZE(supported) - 1; i >= 0; i--) { + if (baud_rate == supported[i]) + return baud_rate; + } + + /* If the baud rate is not supported, switch to the default one */ + tty_encode_baud_rate(tty, 9600, 9600); + + return tty_get_baud_rate(tty); +} + +static void upd78f0730_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, + const struct ktermios *old_termios) +{ + struct device *dev = &port->dev; + struct upd78f0730_line_control request; + speed_t baud_rate; + + if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios)) + return; + + if (C_BAUD(tty) == B0) + upd78f0730_dtr_rts(port, 0); + else if (old_termios && (old_termios->c_cflag & CBAUD) == B0) + upd78f0730_dtr_rts(port, 1); + + baud_rate = upd78f0730_get_baud_rate(tty); + request.opcode = UPD78F0730_CMD_LINE_CONTROL; + request.baud_rate = cpu_to_le32(baud_rate); + request.params = 0; + dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud_rate); + + switch (C_CSIZE(tty)) { + case CS7: + request.params |= UPD78F0730_DATA_SIZE_7_BITS; + dev_dbg(dev, "%s - 7 data bits\n", __func__); + break; + default: + tty->termios.c_cflag &= ~CSIZE; + tty->termios.c_cflag |= CS8; + dev_warn(dev, "data size is not supported, using 8 bits\n"); + fallthrough; + case CS8: + request.params |= UPD78F0730_DATA_SIZE_8_BITS; + dev_dbg(dev, "%s - 8 data bits\n", __func__); + break; + } + + if (C_PARENB(tty)) { + if (C_PARODD(tty)) { + request.params |= UPD78F0730_PARITY_ODD; + dev_dbg(dev, "%s - odd parity\n", __func__); + } else { + request.params |= UPD78F0730_PARITY_EVEN; + dev_dbg(dev, "%s - even parity\n", __func__); + } + + if (C_CMSPAR(tty)) { + tty->termios.c_cflag &= ~CMSPAR; + dev_warn(dev, "MARK/SPACE parity is not supported\n"); + } + } else { + request.params |= UPD78F0730_PARITY_NONE; + dev_dbg(dev, "%s - no parity\n", __func__); + } + + if (C_CSTOPB(tty)) { + request.params |= UPD78F0730_STOP_BIT_2_BIT; + dev_dbg(dev, "%s - 2 stop bits\n", __func__); + } else { + request.params |= UPD78F0730_STOP_BIT_1_BIT; + dev_dbg(dev, "%s - 1 stop bit\n", __func__); + } + + if (C_CRTSCTS(tty)) { + tty->termios.c_cflag &= ~CRTSCTS; + dev_warn(dev, "RTSCTS flow control is not supported\n"); + } + if (I_IXOFF(tty) || I_IXON(tty)) { + tty->termios.c_iflag &= ~(IXOFF | IXON); + dev_warn(dev, "XON/XOFF flow control is not supported\n"); + } + request.params |= UPD78F0730_FLOW_CONTROL_NONE; + dev_dbg(dev, "%s - no flow control\n", __func__); + + upd78f0730_send_ctl(port, &request, sizeof(request)); +} + +static int upd78f0730_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + static const struct upd78f0730_open_close request = { + .opcode = UPD78F0730_CMD_OPEN_CLOSE, + .state = UPD78F0730_PORT_OPEN + }; + int res; + + res = upd78f0730_send_ctl(port, &request, sizeof(request)); + if (res) + return res; + + if (tty) + upd78f0730_set_termios(tty, port, NULL); + + return usb_serial_generic_open(tty, port); +} + +static void upd78f0730_close(struct usb_serial_port *port) +{ + static const struct upd78f0730_open_close request = { + .opcode = UPD78F0730_CMD_OPEN_CLOSE, + .state = UPD78F0730_PORT_CLOSE + }; + + usb_serial_generic_close(port); + upd78f0730_send_ctl(port, &request, sizeof(request)); +} + +static struct usb_serial_driver upd78f0730_device = { + .driver = { + .owner = THIS_MODULE, + .name = "upd78f0730", + }, + .id_table = id_table, + .num_ports = 1, + .port_probe = upd78f0730_port_probe, + .port_remove = upd78f0730_port_remove, + .open = upd78f0730_open, + .close = upd78f0730_close, + .set_termios = upd78f0730_set_termios, + .tiocmget = upd78f0730_tiocmget, + .tiocmset = upd78f0730_tiocmset, + .dtr_rts = upd78f0730_dtr_rts, + .break_ctl = upd78f0730_break_ctl, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &upd78f0730_device, + NULL +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3