From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/usb/serial/visor.c | 580 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 580 insertions(+) create mode 100644 drivers/usb/serial/visor.c (limited to 'drivers/usb/serial/visor.c') diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c new file mode 100644 index 000000000..4412834db --- /dev/null +++ b/drivers/usb/serial/visor.c @@ -0,0 +1,580 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * USB HandSpring Visor, Palm m50x, and Sony Clie driver + * (supports all of the Palm OS USB devices) + * + * Copyright (C) 1999 - 2004 + * Greg Kroah-Hartman (greg@kroah.com) + * + * See Documentation/usb/usb-serial.rst for more information on using this + * driver + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "visor.h" + +/* + * Version Information + */ +#define DRIVER_AUTHOR "Greg Kroah-Hartman " +#define DRIVER_DESC "USB HandSpring Visor / Palm OS driver" + +/* function prototypes for a handspring visor */ +static int visor_open(struct tty_struct *tty, struct usb_serial_port *port); +static void visor_close(struct usb_serial_port *port); +static int visor_probe(struct usb_serial *serial, + const struct usb_device_id *id); +static int visor_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds); +static int clie_5_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds); +static void visor_read_int_callback(struct urb *urb); +static int clie_3_5_startup(struct usb_serial *serial); +static int palm_os_3_probe(struct usb_serial *serial, + const struct usb_device_id *id); +static int palm_os_4_probe(struct usb_serial *serial, + const struct usb_device_id *id); + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID), + .driver_info = (kernel_ulong_t)&palm_os_3_probe }, + { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_M515_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_I705_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_M100_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_M125_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_M130_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_T_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_TREO_650), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_Z_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_S360_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_1_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NX60_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NZ90V_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_TJ25_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(ACER_VENDOR_ID, ACER_S10_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE_INTERFACE_CLASS(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID, 0xff), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(TAPWAVE_VENDOR_ID, TAPWAVE_ZODIAC_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(GARMIN_VENDOR_ID, GARMIN_IQUE_3600_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(ACEECA_VENDOR_ID, ACEECA_MEZ1000_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_7135_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { USB_DEVICE(FOSSIL_VENDOR_ID, FOSSIL_ABACUS_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { } /* Terminating entry */ +}; + +static const struct usb_device_id clie_id_5_table[] = { + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_UX50_ID), + .driver_info = (kernel_ulong_t)&palm_os_4_probe }, + { } /* Terminating entry */ +}; + +static const struct usb_device_id clie_id_3_5_table[] = { + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_3_5_ID) }, + { } /* Terminating entry */ +}; + +static const struct usb_device_id id_table_combined[] = { + { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_VISOR_ID) }, + { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO_ID) }, + { USB_DEVICE(HANDSPRING_VENDOR_ID, HANDSPRING_TREO600_ID) }, + { USB_DEVICE(GSPDA_VENDOR_ID, GSPDA_XPLORE_M68_ID) }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_M500_ID) }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_M505_ID) }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_M515_ID) }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_I705_ID) }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_M100_ID) }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_M125_ID) }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_M130_ID) }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_T_ID) }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_TREO_650) }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_Z_ID) }, + { USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE_ID) }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_3_5_ID) }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID) }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_S360_ID) }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_1_ID) }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NX60_ID) }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_NZ90V_ID) }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_UX50_ID) }, + { USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_TJ25_ID) }, + { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SCH_I330_ID) }, + { USB_DEVICE(SAMSUNG_VENDOR_ID, SAMSUNG_SPH_I500_ID) }, + { USB_DEVICE(TAPWAVE_VENDOR_ID, TAPWAVE_ZODIAC_ID) }, + { USB_DEVICE(GARMIN_VENDOR_ID, GARMIN_IQUE_3600_ID) }, + { USB_DEVICE(ACEECA_VENDOR_ID, ACEECA_MEZ1000_ID) }, + { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_7135_ID) }, + { USB_DEVICE(FOSSIL_VENDOR_ID, FOSSIL_ABACUS_ID) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, id_table_combined); + +/* All of the device info needed for the Handspring Visor, + and Palm 4.0 devices */ +static struct usb_serial_driver handspring_device = { + .driver = { + .owner = THIS_MODULE, + .name = "visor", + }, + .description = "Handspring Visor / Palm OS", + .id_table = id_table, + .num_ports = 2, + .bulk_out_size = 256, + .open = visor_open, + .close = visor_close, + .throttle = usb_serial_generic_throttle, + .unthrottle = usb_serial_generic_unthrottle, + .probe = visor_probe, + .calc_num_ports = visor_calc_num_ports, + .read_int_callback = visor_read_int_callback, +}; + +/* All of the device info needed for the Clie UX50, TH55 Palm 5.0 devices */ +static struct usb_serial_driver clie_5_device = { + .driver = { + .owner = THIS_MODULE, + .name = "clie_5", + }, + .description = "Sony Clie 5.0", + .id_table = clie_id_5_table, + .num_ports = 2, + .num_bulk_out = 2, + .bulk_out_size = 256, + .open = visor_open, + .close = visor_close, + .throttle = usb_serial_generic_throttle, + .unthrottle = usb_serial_generic_unthrottle, + .probe = visor_probe, + .calc_num_ports = clie_5_calc_num_ports, + .read_int_callback = visor_read_int_callback, +}; + +/* device info for the Sony Clie OS version 3.5 */ +static struct usb_serial_driver clie_3_5_device = { + .driver = { + .owner = THIS_MODULE, + .name = "clie_3.5", + }, + .description = "Sony Clie 3.5", + .id_table = clie_id_3_5_table, + .num_ports = 1, + .bulk_out_size = 256, + .open = visor_open, + .close = visor_close, + .throttle = usb_serial_generic_throttle, + .unthrottle = usb_serial_generic_unthrottle, + .attach = clie_3_5_startup, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &handspring_device, &clie_5_device, &clie_3_5_device, NULL +}; + +/****************************************************************************** + * Handspring Visor specific driver functions + ******************************************************************************/ +static int visor_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + int result = 0; + + if (!port->read_urb) { + /* this is needed for some brain dead Sony devices */ + dev_err(&port->dev, "Device lied about number of ports, please use a lower one.\n"); + return -ENODEV; + } + + /* Start reading from the device */ + result = usb_serial_generic_open(tty, port); + if (result) + goto exit; + + if (port->interrupt_in_urb) { + dev_dbg(&port->dev, "adding interrupt input for treo\n"); + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (result) + dev_err(&port->dev, + "%s - failed submitting interrupt urb, error %d\n", + __func__, result); + } +exit: + return result; +} + + +static void visor_close(struct usb_serial_port *port) +{ + unsigned char *transfer_buffer; + + usb_serial_generic_close(port); + usb_kill_urb(port->interrupt_in_urb); + + transfer_buffer = kmalloc(0x12, GFP_KERNEL); + if (!transfer_buffer) + return; + usb_control_msg(port->serial->dev, + usb_rcvctrlpipe(port->serial->dev, 0), + VISOR_CLOSE_NOTIFICATION, 0xc2, + 0x0000, 0x0000, + transfer_buffer, 0x12, 300); + kfree(transfer_buffer); +} + +static void visor_read_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + int status = urb->status; + int result; + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n", + __func__, status); + return; + default: + dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n", + __func__, status); + goto exit; + } + + /* + * This information is still unknown what it can be used for. + * If anyone has an idea, please let the author know... + * + * Rumor has it this endpoint is used to notify when data + * is ready to be read from the bulk ones. + */ + usb_serial_debug_data(&port->dev, __func__, urb->actual_length, + urb->transfer_buffer); + +exit: + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result) + dev_err(&urb->dev->dev, + "%s - Error %d submitting interrupt urb\n", + __func__, result); +} + +static int palm_os_3_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + struct device *dev = &serial->dev->dev; + struct visor_connection_info *connection_info; + unsigned char *transfer_buffer; + char *string; + int retval = 0; + int i; + int num_ports = 0; + + transfer_buffer = kmalloc(sizeof(*connection_info), GFP_KERNEL); + if (!transfer_buffer) + return -ENOMEM; + + /* send a get connection info request */ + retval = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + VISOR_GET_CONNECTION_INFORMATION, + 0xc2, 0x0000, 0x0000, transfer_buffer, + sizeof(*connection_info), 300); + if (retval < 0) { + dev_err(dev, "%s - error %d getting connection information\n", + __func__, retval); + goto exit; + } + + if (retval != sizeof(*connection_info)) { + dev_err(dev, "Invalid connection information received from device\n"); + retval = -ENODEV; + goto exit; + } + + connection_info = (struct visor_connection_info *)transfer_buffer; + + num_ports = le16_to_cpu(connection_info->num_ports); + + /* Handle devices that report invalid stuff here. */ + if (num_ports == 0 || num_ports > 2) { + dev_warn(dev, "%s: No valid connect info available\n", + serial->type->description); + num_ports = 2; + } + + for (i = 0; i < num_ports; ++i) { + switch (connection_info->connections[i].port_function_id) { + case VISOR_FUNCTION_GENERIC: + string = "Generic"; + break; + case VISOR_FUNCTION_DEBUGGER: + string = "Debugger"; + break; + case VISOR_FUNCTION_HOTSYNC: + string = "HotSync"; + break; + case VISOR_FUNCTION_CONSOLE: + string = "Console"; + break; + case VISOR_FUNCTION_REMOTE_FILE_SYS: + string = "Remote File System"; + break; + default: + string = "unknown"; + break; + } + dev_info(dev, "%s: port %d, is for %s use\n", + serial->type->description, + connection_info->connections[i].port, string); + } + dev_info(dev, "%s: Number of ports: %d\n", serial->type->description, + num_ports); + + /* + * save off our num_ports info so that we can use it in the + * calc_num_ports callback + */ + usb_set_serial_data(serial, (void *)(long)num_ports); + + /* ask for the number of bytes available, but ignore the + response as it is broken */ + retval = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + VISOR_REQUEST_BYTES_AVAILABLE, + 0xc2, 0x0000, 0x0005, transfer_buffer, + 0x02, 300); + if (retval < 0) + dev_err(dev, "%s - error %d getting bytes available request\n", + __func__, retval); + retval = 0; + +exit: + kfree(transfer_buffer); + + return retval; +} + +static int palm_os_4_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + struct device *dev = &serial->dev->dev; + struct palm_ext_connection_info *connection_info; + unsigned char *transfer_buffer; + int retval; + + transfer_buffer = kmalloc(sizeof(*connection_info), GFP_KERNEL); + if (!transfer_buffer) + return -ENOMEM; + + retval = usb_control_msg(serial->dev, + usb_rcvctrlpipe(serial->dev, 0), + PALM_GET_EXT_CONNECTION_INFORMATION, + 0xc2, 0x0000, 0x0000, transfer_buffer, + sizeof(*connection_info), 300); + if (retval < 0) + dev_err(dev, "%s - error %d getting connection info\n", + __func__, retval); + else + usb_serial_debug_data(dev, __func__, retval, transfer_buffer); + + kfree(transfer_buffer); + return 0; +} + + +static int visor_probe(struct usb_serial *serial, + const struct usb_device_id *id) +{ + int retval = 0; + int (*startup)(struct usb_serial *serial, + const struct usb_device_id *id); + + /* + * some Samsung Android phones in modem mode have the same ID + * as SPH-I500, but they are ACM devices, so dont bind to them + */ + if (id->idVendor == SAMSUNG_VENDOR_ID && + id->idProduct == SAMSUNG_SPH_I500_ID && + serial->dev->descriptor.bDeviceClass == USB_CLASS_COMM && + serial->dev->descriptor.bDeviceSubClass == + USB_CDC_SUBCLASS_ACM) + return -ENODEV; + + if (serial->dev->actconfig->desc.bConfigurationValue != 1) { + dev_err(&serial->dev->dev, "active config #%d != 1 ??\n", + serial->dev->actconfig->desc.bConfigurationValue); + return -ENODEV; + } + + if (id->driver_info) { + startup = (void *)id->driver_info; + retval = startup(serial, id); + } + + return retval; +} + +static int visor_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds) +{ + unsigned int vid = le16_to_cpu(serial->dev->descriptor.idVendor); + int num_ports = (int)(long)(usb_get_serial_data(serial)); + + if (num_ports) + usb_set_serial_data(serial, NULL); + + /* + * Only swap the bulk endpoints for the Handspring devices with + * interrupt in endpoints, which for now are the Treo devices. + */ + if (!(vid == HANDSPRING_VENDOR_ID || vid == KYOCERA_VENDOR_ID) || + epds->num_interrupt_in == 0) + goto out; + + if (epds->num_bulk_in < 2 || epds->num_interrupt_in < 2) { + dev_err(&serial->interface->dev, "missing endpoints\n"); + return -ENODEV; + } + + /* + * It appears that Treos and Kyoceras want to use the + * 1st bulk in endpoint to communicate with the 2nd bulk out endpoint, + * so let's swap the 1st and 2nd bulk in and interrupt endpoints. + * Note that swapping the bulk out endpoints would break lots of + * apps that want to communicate on the second port. + */ + swap(epds->bulk_in[0], epds->bulk_in[1]); + swap(epds->interrupt_in[0], epds->interrupt_in[1]); +out: + return num_ports; +} + +static int clie_5_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds) +{ + /* + * TH55 registers 2 ports. + * Communication in from the UX50/TH55 uses the first bulk-in + * endpoint, while communication out to the UX50/TH55 uses the second + * bulk-out endpoint. + */ + + /* + * FIXME: Should we swap the descriptors instead of using the same + * bulk-out endpoint for both ports? + */ + epds->bulk_out[0] = epds->bulk_out[1]; + + return serial->type->num_ports; +} + +static int clie_3_5_startup(struct usb_serial *serial) +{ + struct device *dev = &serial->dev->dev; + int result; + u8 *data; + + data = kmalloc(1, GFP_KERNEL); + if (!data) + return -ENOMEM; + + /* + * Note that PEG-300 series devices expect the following two calls. + */ + + /* get the config number */ + result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + USB_REQ_GET_CONFIGURATION, USB_DIR_IN, + 0, 0, data, 1, 3000); + if (result < 0) { + dev_err(dev, "%s: get config number failed: %d\n", + __func__, result); + goto out; + } + if (result != 1) { + dev_err(dev, "%s: get config number bad return length: %d\n", + __func__, result); + result = -EIO; + goto out; + } + + /* get the interface number */ + result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + USB_REQ_GET_INTERFACE, + USB_DIR_IN | USB_RECIP_INTERFACE, + 0, 0, data, 1, 3000); + if (result < 0) { + dev_err(dev, "%s: get interface number failed: %d\n", + __func__, result); + goto out; + } + if (result != 1) { + dev_err(dev, + "%s: get interface number bad return length: %d\n", + __func__, result); + result = -EIO; + goto out; + } + + result = 0; +out: + kfree(data); + + return result; +} + +module_usb_serial_driver(serial_drivers, id_table_combined); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3