From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/usb/storage/Kconfig | 200 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 200 insertions(+) create mode 100644 drivers/usb/storage/Kconfig (limited to 'drivers/usb/storage/Kconfig') diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig new file mode 100644 index 000000000..d17b60a64 --- /dev/null +++ b/drivers/usb/storage/Kconfig @@ -0,0 +1,200 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# USB Storage driver configuration +# + +comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may" +comment "also be needed; see USB_STORAGE Help for more info" + +config USB_STORAGE + tristate "USB Mass Storage support" + depends on SCSI + help + Say Y here if you want to connect USB mass storage devices to your + computer's USB port. This is the driver you need for USB + floppy drives, USB hard disks, USB tape drives, USB CD-ROMs, + USB flash devices, and memory sticks, along with + similar devices. This driver may also be used for some cameras + and card readers. + + This option depends on 'SCSI' support being enabled, but you + probably also need 'SCSI device support: SCSI disk support' + (BLK_DEV_SD) for most USB storage devices. + + To compile this driver as a module, choose M here: the + module will be called usb-storage. + +if USB_STORAGE + +config USB_STORAGE_DEBUG + bool "USB Mass Storage verbose debug" + help + Say Y here in order to have the USB Mass Storage code generate + verbose debugging messages. + +config USB_STORAGE_REALTEK + tristate "Realtek Card Reader support" + help + Say Y here to include additional code to support the power-saving function + for Realtek RTS51xx USB card readers. + + If this driver is compiled as a module, it will be named ums-realtek. + +config REALTEK_AUTOPM + bool "Realtek Card Reader autosuspend support" + depends on USB_STORAGE_REALTEK && PM + default y + +config USB_STORAGE_DATAFAB + tristate "Datafab Compact Flash Reader support" + help + Support for certain Datafab CompactFlash readers. + Datafab has a web page at . + + If this driver is compiled as a module, it will be named ums-datafab. + +config USB_STORAGE_FREECOM + tristate "Freecom USB/ATAPI Bridge support" + help + Support for the Freecom USB to IDE/ATAPI adaptor. + Freecom has a web page at . + + If this driver is compiled as a module, it will be named ums-freecom. + +config USB_STORAGE_ISD200 + tristate "ISD-200 USB/ATA Bridge support" + help + Say Y here if you want to use USB Mass Store devices based + on the In-Systems Design ISD-200 USB/ATA bridge. + + Some of the products that use this chip are: + + - Archos Jukebox 6000 + - ISD SmartCable for Storage + - Taiwan Skymaster CD530U/DEL-0241 IDE bridge + - Sony CRX10U CD-R/RW drive + - CyQ've CQ8060A CDRW drive + - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U) + + If this driver is compiled as a module, it will be named ums-isd200. + +config USB_STORAGE_USBAT + tristate "USBAT/USBAT02-based storage support" + help + Say Y here to include additional code to support storage devices + based on the SCM/Shuttle USBAT/USBAT02 processors. + + Devices reported to work with this driver include: + - CompactFlash reader included with Kodak DC3800 camera + - Dane-Elec Zmate CompactFlash reader + - Delkin Efilm reader2 + - HP 8200e/8210e/8230e CD-Writer Plus drives + - I-JAM JS-50U + - Jessops CompactFlash JESDCFRU BLACK + - Kingston Technology PCREAD-USB/CF + - Maxell UA4 CompactFlash reader + - Memorex UCF-100 + - Microtech ZiO! ICS-45 CF2 + - RCA LYRA MP3 portable + - Sandisk ImageMate SDDR-05b + + If this driver is compiled as a module, it will be named ums-usbat. + +config USB_STORAGE_SDDR09 + tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support" + help + Say Y here to include additional code to support the Sandisk SDDR-09 + SmartMedia reader in the USB Mass Storage driver. + Also works for the Microtech Zio! CompactFlash/SmartMedia reader. + + If this driver is compiled as a module, it will be named ums-sddr09. + +config USB_STORAGE_SDDR55 + tristate "SanDisk SDDR-55 SmartMedia support" + help + Say Y here to include additional code to support the Sandisk SDDR-55 + SmartMedia reader in the USB Mass Storage driver. + + If this driver is compiled as a module, it will be named ums-sddr55. + +config USB_STORAGE_JUMPSHOT + tristate "Lexar Jumpshot Compact Flash Reader" + help + Say Y here to include additional code to support the Lexar Jumpshot + USB CompactFlash reader. + + If this driver is compiled as a module, it will be named ums-jumpshot. + +config USB_STORAGE_ALAUDA + tristate "Olympus MAUSB-10/Fuji DPC-R1 support" + help + Say Y here to include additional code to support the Olympus MAUSB-10 + and Fujifilm DPC-R1 USB Card reader/writer devices. + + These devices are based on the Alauda chip and support both + XD and SmartMedia cards. + + If this driver is compiled as a module, it will be named ums-alauda. + +config USB_STORAGE_ONETOUCH + tristate "Support OneTouch Button on Maxtor Hard Drives" + depends on INPUT=y || INPUT=USB_STORAGE + help + Say Y here to include additional code to support the Maxtor OneTouch + USB hard drive's onetouch button. + + This code registers the button on the front of Maxtor OneTouch USB + hard drive's as an input device. An action can be associated with + this input in any keybinding software. (e.g. gnome's keyboard short- + cuts) + + If this driver is compiled as a module, it will be named ums-onetouch. + +config USB_STORAGE_KARMA + tristate "Support for Rio Karma music player" + help + Say Y here to include additional code to support the Rio Karma + USB interface. + + This code places the Rio Karma into mass storage mode, enabling + it to be mounted as an ordinary filesystem. Performing an eject + on the resulting scsi device node returns the Karma to normal + operation. + + If this driver is compiled as a module, it will be named ums-karma. + +config USB_STORAGE_CYPRESS_ATACB + tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB" + help + Say Y here if you want to use SAT (ata pass through) on devices based + on the Cypress USB/ATA bridge supporting ATACB. This will allow you + to use tools to tune and monitor your drive (like hdparm or smartctl). + + If you say no here your device will still work with the standard usb + mass storage class. + + If this driver is compiled as a module, it will be named ums-cypress. + +config USB_STORAGE_ENE_UB6250 + tristate "USB ENE card reader support" + help + Say Y here if you wish to control a ENE SD/MS Card reader. + Note that this driver does not support SM cards. + + To compile this driver as a module, choose M here: the + module will be called ums-eneub6250. + +endif # USB_STORAGE + +config USB_UAS + tristate "USB Attached SCSI" + depends on SCSI && USB_STORAGE + help + The USB Attached SCSI protocol is supported by some USB + storage devices. It permits higher performance by supporting + multiple outstanding commands. + + If you don't know whether you have a UAS device, it is safe to + say 'Y' or 'M' here and the kernel will use the right driver. + + If you compile this driver as a module, it will be named uas. -- cgit v1.2.3