From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/usb/storage/karma.c | 234 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 234 insertions(+) create mode 100644 drivers/usb/storage/karma.c (limited to 'drivers/usb/storage/karma.c') diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c new file mode 100644 index 000000000..38ddfedef --- /dev/null +++ b/drivers/usb/storage/karma.c @@ -0,0 +1,234 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Driver for Rio Karma + * + * (c) 2006 Bob Copeland + * (c) 2006 Keith Bennett + */ + +#include +#include + +#include +#include +#include + +#include "usb.h" +#include "transport.h" +#include "debug.h" +#include "scsiglue.h" + +#define DRV_NAME "ums-karma" + +MODULE_DESCRIPTION("Driver for Rio Karma"); +MODULE_AUTHOR("Bob Copeland , Keith Bennett "); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(USB_STORAGE); + +#define RIO_PREFIX "RIOP\x00" +#define RIO_PREFIX_LEN 5 +#define RIO_SEND_LEN 40 +#define RIO_RECV_LEN 0x200 + +#define RIO_ENTER_STORAGE 0x1 +#define RIO_LEAVE_STORAGE 0x2 +#define RIO_RESET 0xC + +struct karma_data { + int in_storage; + char *recv; +}; + +static int rio_karma_init(struct us_data *us); + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags) } + +static struct usb_device_id karma_usb_ids[] = { +# include "unusual_karma.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, karma_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev karma_unusual_dev_list[] = { +# include "unusual_karma.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + + +/* + * Send commands to Rio Karma. + * + * For each command we send 40 bytes starting 'RIOP\0' followed by + * the command number and a sequence number, which the device will ack + * with a 512-byte packet with the high four bits set and everything + * else null. Then we send 'RIOP\x80' followed by a zero and the + * sequence number, until byte 5 in the response repeats the sequence + * number. + */ +static int rio_karma_send_command(char cmd, struct us_data *us) +{ + int result; + unsigned long timeout; + static unsigned char seq = 1; + struct karma_data *data = (struct karma_data *) us->extra; + + usb_stor_dbg(us, "sending command %04x\n", cmd); + memset(us->iobuf, 0, RIO_SEND_LEN); + memcpy(us->iobuf, RIO_PREFIX, RIO_PREFIX_LEN); + us->iobuf[5] = cmd; + us->iobuf[6] = seq; + + timeout = jiffies + msecs_to_jiffies(6000); + for (;;) { + result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, + us->iobuf, RIO_SEND_LEN, NULL); + if (result != USB_STOR_XFER_GOOD) + goto err; + + result = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, + data->recv, RIO_RECV_LEN, NULL); + if (result != USB_STOR_XFER_GOOD) + goto err; + + if (data->recv[5] == seq) + break; + + if (time_after(jiffies, timeout)) + goto err; + + us->iobuf[4] = 0x80; + us->iobuf[5] = 0; + msleep(50); + } + + seq++; + if (seq == 0) + seq = 1; + + usb_stor_dbg(us, "sent command %04x\n", cmd); + return 0; +err: + usb_stor_dbg(us, "command %04x failed\n", cmd); + return USB_STOR_TRANSPORT_FAILED; +} + +/* + * Trap START_STOP and READ_10 to leave/re-enter storage mode. + * Everything else is propagated to the normal bulk layer. + */ +static int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us) +{ + int ret; + struct karma_data *data = (struct karma_data *) us->extra; + + if (srb->cmnd[0] == READ_10 && !data->in_storage) { + ret = rio_karma_send_command(RIO_ENTER_STORAGE, us); + if (ret) + return ret; + + data->in_storage = 1; + return usb_stor_Bulk_transport(srb, us); + } else if (srb->cmnd[0] == START_STOP) { + ret = rio_karma_send_command(RIO_LEAVE_STORAGE, us); + if (ret) + return ret; + + data->in_storage = 0; + return rio_karma_send_command(RIO_RESET, us); + } + return usb_stor_Bulk_transport(srb, us); +} + +static void rio_karma_destructor(void *extra) +{ + struct karma_data *data = (struct karma_data *) extra; + + kfree(data->recv); +} + +static int rio_karma_init(struct us_data *us) +{ + struct karma_data *data = kzalloc(sizeof(struct karma_data), GFP_NOIO); + + if (!data) + return -ENOMEM; + + data->recv = kmalloc(RIO_RECV_LEN, GFP_NOIO); + if (!data->recv) { + kfree(data); + return -ENOMEM; + } + + us->extra = data; + us->extra_destructor = rio_karma_destructor; + if (rio_karma_send_command(RIO_ENTER_STORAGE, us)) + return -EIO; + + data->in_storage = 1; + + return 0; +} + +static struct scsi_host_template karma_host_template; + +static int karma_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - karma_usb_ids) + karma_unusual_dev_list, + &karma_host_template); + if (result) + return result; + + us->transport_name = "Rio Karma/Bulk"; + us->transport = rio_karma_transport; + us->transport_reset = usb_stor_Bulk_reset; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver karma_driver = { + .name = DRV_NAME, + .probe = karma_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = karma_usb_ids, + .soft_unbind = 1, + .no_dynamic_id = 1, +}; + +module_usb_stor_driver(karma_driver, karma_host_template, DRV_NAME); -- cgit v1.2.3