From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/usb/typec/qcom-pmic-typec.c | 261 ++++++++++++++++++++++++++++++++++++ 1 file changed, 261 insertions(+) create mode 100644 drivers/usb/typec/qcom-pmic-typec.c (limited to 'drivers/usb/typec/qcom-pmic-typec.c') diff --git a/drivers/usb/typec/qcom-pmic-typec.c b/drivers/usb/typec/qcom-pmic-typec.c new file mode 100644 index 000000000..432ea62f1 --- /dev/null +++ b/drivers/usb/typec/qcom-pmic-typec.c @@ -0,0 +1,261 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define TYPEC_MISC_STATUS 0xb +#define CC_ATTACHED BIT(0) +#define CC_ORIENTATION BIT(1) +#define SNK_SRC_MODE BIT(6) +#define TYPEC_MODE_CFG 0x44 +#define TYPEC_DISABLE_CMD BIT(0) +#define EN_SNK_ONLY BIT(1) +#define EN_SRC_ONLY BIT(2) +#define TYPEC_VCONN_CONTROL 0x46 +#define VCONN_EN_SRC BIT(0) +#define VCONN_EN_VAL BIT(1) +#define TYPEC_EXIT_STATE_CFG 0x50 +#define SEL_SRC_UPPER_REF BIT(2) +#define TYPEC_INTR_EN_CFG_1 0x5e +#define TYPEC_INTR_EN_CFG_1_MASK GENMASK(7, 0) + +struct qcom_pmic_typec { + struct device *dev; + struct regmap *regmap; + u32 base; + + struct typec_port *port; + struct usb_role_switch *role_sw; + + struct regulator *vbus_reg; + bool vbus_enabled; +}; + +static void qcom_pmic_typec_enable_vbus_regulator(struct qcom_pmic_typec + *qcom_usb, bool enable) +{ + int ret; + + if (enable == qcom_usb->vbus_enabled) + return; + + if (enable) { + ret = regulator_enable(qcom_usb->vbus_reg); + if (ret) + return; + } else { + ret = regulator_disable(qcom_usb->vbus_reg); + if (ret) + return; + } + qcom_usb->vbus_enabled = enable; +} + +static void qcom_pmic_typec_check_connection(struct qcom_pmic_typec *qcom_usb) +{ + enum typec_orientation orientation; + enum usb_role role; + unsigned int stat; + bool enable_vbus; + + regmap_read(qcom_usb->regmap, qcom_usb->base + TYPEC_MISC_STATUS, + &stat); + + if (stat & CC_ATTACHED) { + orientation = (stat & CC_ORIENTATION) ? + TYPEC_ORIENTATION_REVERSE : + TYPEC_ORIENTATION_NORMAL; + typec_set_orientation(qcom_usb->port, orientation); + + role = (stat & SNK_SRC_MODE) ? USB_ROLE_HOST : USB_ROLE_DEVICE; + if (role == USB_ROLE_HOST) + enable_vbus = true; + else + enable_vbus = false; + } else { + role = USB_ROLE_NONE; + enable_vbus = false; + } + + qcom_pmic_typec_enable_vbus_regulator(qcom_usb, enable_vbus); + usb_role_switch_set_role(qcom_usb->role_sw, role); +} + +static irqreturn_t qcom_pmic_typec_interrupt(int irq, void *_qcom_usb) +{ + struct qcom_pmic_typec *qcom_usb = _qcom_usb; + + qcom_pmic_typec_check_connection(qcom_usb); + return IRQ_HANDLED; +} + +static void qcom_pmic_typec_typec_hw_init(struct qcom_pmic_typec *qcom_usb, + enum typec_port_type type) +{ + u8 mode = 0; + + regmap_update_bits(qcom_usb->regmap, + qcom_usb->base + TYPEC_INTR_EN_CFG_1, + TYPEC_INTR_EN_CFG_1_MASK, 0); + + if (type == TYPEC_PORT_SRC) + mode = EN_SRC_ONLY; + else if (type == TYPEC_PORT_SNK) + mode = EN_SNK_ONLY; + + regmap_update_bits(qcom_usb->regmap, qcom_usb->base + TYPEC_MODE_CFG, + EN_SNK_ONLY | EN_SRC_ONLY, mode); + + regmap_update_bits(qcom_usb->regmap, + qcom_usb->base + TYPEC_VCONN_CONTROL, + VCONN_EN_SRC | VCONN_EN_VAL, VCONN_EN_SRC); + regmap_update_bits(qcom_usb->regmap, + qcom_usb->base + TYPEC_EXIT_STATE_CFG, + SEL_SRC_UPPER_REF, SEL_SRC_UPPER_REF); +} + +static int qcom_pmic_typec_probe(struct platform_device *pdev) +{ + struct qcom_pmic_typec *qcom_usb; + struct device *dev = &pdev->dev; + struct fwnode_handle *fwnode; + struct typec_capability cap; + const char *buf; + int ret, irq, role; + u32 reg; + + ret = device_property_read_u32(dev, "reg", ®); + if (ret < 0) { + dev_err(dev, "missing base address\n"); + return ret; + } + + qcom_usb = devm_kzalloc(dev, sizeof(*qcom_usb), GFP_KERNEL); + if (!qcom_usb) + return -ENOMEM; + + qcom_usb->dev = dev; + qcom_usb->base = reg; + + qcom_usb->regmap = dev_get_regmap(dev->parent, NULL); + if (!qcom_usb->regmap) { + dev_err(dev, "Failed to get regmap\n"); + return -EINVAL; + } + + qcom_usb->vbus_reg = devm_regulator_get(qcom_usb->dev, "usb_vbus"); + if (IS_ERR(qcom_usb->vbus_reg)) + return PTR_ERR(qcom_usb->vbus_reg); + + fwnode = device_get_named_child_node(dev, "connector"); + if (!fwnode) + return -EINVAL; + + ret = fwnode_property_read_string(fwnode, "power-role", &buf); + if (!ret) { + role = typec_find_port_power_role(buf); + if (role < 0) + role = TYPEC_PORT_SNK; + } else { + role = TYPEC_PORT_SNK; + } + cap.type = role; + + ret = fwnode_property_read_string(fwnode, "data-role", &buf); + if (!ret) { + role = typec_find_port_data_role(buf); + if (role < 0) + role = TYPEC_PORT_UFP; + } else { + role = TYPEC_PORT_UFP; + } + cap.data = role; + + cap.prefer_role = TYPEC_NO_PREFERRED_ROLE; + cap.fwnode = fwnode; + qcom_usb->port = typec_register_port(dev, &cap); + if (IS_ERR(qcom_usb->port)) { + ret = PTR_ERR(qcom_usb->port); + dev_err(dev, "Failed to register type c port %d\n", ret); + goto err_put_node; + } + fwnode_handle_put(fwnode); + + qcom_usb->role_sw = fwnode_usb_role_switch_get(dev_fwnode(qcom_usb->dev)); + if (IS_ERR(qcom_usb->role_sw)) { + ret = dev_err_probe(dev, PTR_ERR(qcom_usb->role_sw), + "failed to get role switch\n"); + goto err_typec_port; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + goto err_usb_role_sw; + + ret = devm_request_threaded_irq(qcom_usb->dev, irq, NULL, + qcom_pmic_typec_interrupt, IRQF_ONESHOT, + "qcom-pmic-typec", qcom_usb); + if (ret) { + dev_err(&pdev->dev, "Could not request IRQ\n"); + goto err_usb_role_sw; + } + + platform_set_drvdata(pdev, qcom_usb); + qcom_pmic_typec_typec_hw_init(qcom_usb, cap.type); + qcom_pmic_typec_check_connection(qcom_usb); + + return 0; + +err_usb_role_sw: + usb_role_switch_put(qcom_usb->role_sw); +err_typec_port: + typec_unregister_port(qcom_usb->port); +err_put_node: + fwnode_handle_put(fwnode); + + return ret; +} + +static int qcom_pmic_typec_remove(struct platform_device *pdev) +{ + struct qcom_pmic_typec *qcom_usb = platform_get_drvdata(pdev); + + usb_role_switch_set_role(qcom_usb->role_sw, USB_ROLE_NONE); + qcom_pmic_typec_enable_vbus_regulator(qcom_usb, 0); + + typec_unregister_port(qcom_usb->port); + usb_role_switch_put(qcom_usb->role_sw); + + return 0; +} + +static const struct of_device_id qcom_pmic_typec_table[] = { + { .compatible = "qcom,pm8150b-usb-typec" }, + { } +}; +MODULE_DEVICE_TABLE(of, qcom_pmic_typec_table); + +static struct platform_driver qcom_pmic_typec = { + .driver = { + .name = "qcom,pmic-typec", + .of_match_table = qcom_pmic_typec_table, + }, + .probe = qcom_pmic_typec_probe, + .remove = qcom_pmic_typec_remove, +}; +module_platform_driver(qcom_pmic_typec); + +MODULE_DESCRIPTION("QCOM PMIC USB type C driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3