From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/usb/usbip/vudc_rx.c | 243 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 243 insertions(+) create mode 100644 drivers/usb/usbip/vudc_rx.c (limited to 'drivers/usb/usbip/vudc_rx.c') diff --git a/drivers/usb/usbip/vudc_rx.c b/drivers/usb/usbip/vudc_rx.c new file mode 100644 index 000000000..51bb70837 --- /dev/null +++ b/drivers/usb/usbip/vudc_rx.c @@ -0,0 +1,243 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2015 Karol Kosik + * Copyright (C) 2015-2016 Samsung Electronics + * Igor Kotrasinski + */ + +#include +#include +#include + +#include "usbip_common.h" +#include "vudc.h" + +static int alloc_urb_from_cmd(struct urb **urbp, + struct usbip_header *pdu, u8 type) +{ + struct urb *urb; + + if (type == USB_ENDPOINT_XFER_ISOC) + urb = usb_alloc_urb(pdu->u.cmd_submit.number_of_packets, + GFP_KERNEL); + else + urb = usb_alloc_urb(0, GFP_KERNEL); + + if (!urb) + goto err; + + usbip_pack_pdu(pdu, urb, USBIP_CMD_SUBMIT, 0); + + if (urb->transfer_buffer_length > 0) { + urb->transfer_buffer = kzalloc(urb->transfer_buffer_length, + GFP_KERNEL); + if (!urb->transfer_buffer) + goto free_urb; + } + + urb->setup_packet = kmemdup(&pdu->u.cmd_submit.setup, 8, + GFP_KERNEL); + if (!urb->setup_packet) + goto free_buffer; + + /* + * FIXME - we only setup pipe enough for usbip functions + * to behave nicely + */ + urb->pipe |= pdu->base.direction == USBIP_DIR_IN ? + USB_DIR_IN : USB_DIR_OUT; + + *urbp = urb; + return 0; + +free_buffer: + kfree(urb->transfer_buffer); + urb->transfer_buffer = NULL; +free_urb: + usb_free_urb(urb); +err: + return -ENOMEM; +} + +static int v_recv_cmd_unlink(struct vudc *udc, + struct usbip_header *pdu) +{ + unsigned long flags; + struct urbp *urb_p; + + spin_lock_irqsave(&udc->lock, flags); + list_for_each_entry(urb_p, &udc->urb_queue, urb_entry) { + if (urb_p->seqnum != pdu->u.cmd_unlink.seqnum) + continue; + urb_p->urb->unlinked = -ECONNRESET; + urb_p->seqnum = pdu->base.seqnum; + v_kick_timer(udc, jiffies); + spin_unlock_irqrestore(&udc->lock, flags); + return 0; + } + /* Not found, completed / not queued */ + spin_lock(&udc->lock_tx); + v_enqueue_ret_unlink(udc, pdu->base.seqnum, 0); + wake_up(&udc->tx_waitq); + spin_unlock(&udc->lock_tx); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; +} + +static int v_recv_cmd_submit(struct vudc *udc, + struct usbip_header *pdu) +{ + int ret = 0; + struct urbp *urb_p; + u8 address; + unsigned long flags; + + urb_p = alloc_urbp(); + if (!urb_p) { + usbip_event_add(&udc->ud, VUDC_EVENT_ERROR_MALLOC); + return -ENOMEM; + } + + /* base.ep is pipeendpoint(pipe) */ + address = pdu->base.ep; + if (pdu->base.direction == USBIP_DIR_IN) + address |= USB_DIR_IN; + + spin_lock_irqsave(&udc->lock, flags); + urb_p->ep = vudc_find_endpoint(udc, address); + if (!urb_p->ep) { + /* we don't know the type, there may be isoc data! */ + dev_err(&udc->pdev->dev, "request to nonexistent endpoint"); + spin_unlock_irqrestore(&udc->lock, flags); + usbip_event_add(&udc->ud, VUDC_EVENT_ERROR_TCP); + ret = -EPIPE; + goto free_urbp; + } + urb_p->type = urb_p->ep->type; + spin_unlock_irqrestore(&udc->lock, flags); + + urb_p->new = 1; + urb_p->seqnum = pdu->base.seqnum; + + if (urb_p->ep->type == USB_ENDPOINT_XFER_ISOC) { + /* validate packet size and number of packets */ + unsigned int maxp, packets, bytes; + + maxp = usb_endpoint_maxp(urb_p->ep->desc); + maxp *= usb_endpoint_maxp_mult(urb_p->ep->desc); + bytes = pdu->u.cmd_submit.transfer_buffer_length; + packets = DIV_ROUND_UP(bytes, maxp); + + if (pdu->u.cmd_submit.number_of_packets < 0 || + pdu->u.cmd_submit.number_of_packets > packets) { + dev_err(&udc->gadget.dev, + "CMD_SUBMIT: isoc invalid num packets %d\n", + pdu->u.cmd_submit.number_of_packets); + ret = -EMSGSIZE; + goto free_urbp; + } + } + + ret = alloc_urb_from_cmd(&urb_p->urb, pdu, urb_p->ep->type); + if (ret) { + usbip_event_add(&udc->ud, VUDC_EVENT_ERROR_MALLOC); + ret = -ENOMEM; + goto free_urbp; + } + + urb_p->urb->status = -EINPROGRESS; + + /* FIXME: more pipe setup to please usbip_common */ + BUILD_BUG_ON_MSG(PIPE_BULK != 3, "PIPE_* doesn't range from 0 to 3"); + + urb_p->urb->pipe &= ~(PIPE_BULK << 30); + switch (urb_p->ep->type) { + case USB_ENDPOINT_XFER_BULK: + urb_p->urb->pipe |= (PIPE_BULK << 30); + break; + case USB_ENDPOINT_XFER_INT: + urb_p->urb->pipe |= (PIPE_INTERRUPT << 30); + break; + case USB_ENDPOINT_XFER_CONTROL: + urb_p->urb->pipe |= (PIPE_CONTROL << 30); + break; + case USB_ENDPOINT_XFER_ISOC: + urb_p->urb->pipe |= (PIPE_ISOCHRONOUS << 30); + break; + } + ret = usbip_recv_xbuff(&udc->ud, urb_p->urb); + if (ret < 0) + goto free_urbp; + + ret = usbip_recv_iso(&udc->ud, urb_p->urb); + if (ret < 0) + goto free_urbp; + + spin_lock_irqsave(&udc->lock, flags); + v_kick_timer(udc, jiffies); + list_add_tail(&urb_p->urb_entry, &udc->urb_queue); + spin_unlock_irqrestore(&udc->lock, flags); + + return 0; + +free_urbp: + free_urbp_and_urb(urb_p); + return ret; +} + +static int v_rx_pdu(struct usbip_device *ud) +{ + int ret; + struct usbip_header pdu; + struct vudc *udc = container_of(ud, struct vudc, ud); + + memset(&pdu, 0, sizeof(pdu)); + ret = usbip_recv(ud->tcp_socket, &pdu, sizeof(pdu)); + if (ret != sizeof(pdu)) { + usbip_event_add(ud, VUDC_EVENT_ERROR_TCP); + if (ret >= 0) + return -EPIPE; + return ret; + } + usbip_header_correct_endian(&pdu, 0); + + spin_lock_irq(&ud->lock); + ret = (ud->status == SDEV_ST_USED); + spin_unlock_irq(&ud->lock); + if (!ret) { + usbip_event_add(ud, VUDC_EVENT_ERROR_TCP); + return -EBUSY; + } + + switch (pdu.base.command) { + case USBIP_CMD_UNLINK: + ret = v_recv_cmd_unlink(udc, &pdu); + break; + case USBIP_CMD_SUBMIT: + ret = v_recv_cmd_submit(udc, &pdu); + break; + default: + ret = -EPIPE; + pr_err("rx: unknown command"); + break; + } + return ret; +} + +int v_rx_loop(void *data) +{ + struct usbip_device *ud = data; + int ret = 0; + + while (!kthread_should_stop()) { + if (usbip_event_happened(ud)) + break; + ret = v_rx_pdu(ud); + if (ret < 0) { + pr_warn("v_rx exit with error %d", ret); + break; + } + } + return ret; +} -- cgit v1.2.3