From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/video/backlight/lm3639_bl.c | 424 ++++++++++++++++++++++++++++++++++++ 1 file changed, 424 insertions(+) create mode 100644 drivers/video/backlight/lm3639_bl.c (limited to 'drivers/video/backlight/lm3639_bl.c') diff --git a/drivers/video/backlight/lm3639_bl.c b/drivers/video/backlight/lm3639_bl.c new file mode 100644 index 000000000..a836628ce --- /dev/null +++ b/drivers/video/backlight/lm3639_bl.c @@ -0,0 +1,424 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* +* Simple driver for Texas Instruments LM3639 Backlight + Flash LED driver chip +* Copyright (C) 2012 Texas Instruments +*/ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define REG_DEV_ID 0x00 +#define REG_CHECKSUM 0x01 +#define REG_BL_CONF_1 0x02 +#define REG_BL_CONF_2 0x03 +#define REG_BL_CONF_3 0x04 +#define REG_BL_CONF_4 0x05 +#define REG_FL_CONF_1 0x06 +#define REG_FL_CONF_2 0x07 +#define REG_FL_CONF_3 0x08 +#define REG_IO_CTRL 0x09 +#define REG_ENABLE 0x0A +#define REG_FLAG 0x0B +#define REG_MAX REG_FLAG + +struct lm3639_chip_data { + struct device *dev; + struct lm3639_platform_data *pdata; + + struct backlight_device *bled; + struct led_classdev cdev_flash; + struct led_classdev cdev_torch; + struct regmap *regmap; + + unsigned int bled_mode; + unsigned int bled_map; + unsigned int last_flag; +}; + +/* initialize chip */ +static int lm3639_chip_init(struct lm3639_chip_data *pchip) +{ + int ret; + unsigned int reg_val; + struct lm3639_platform_data *pdata = pchip->pdata; + + /* input pins config. */ + ret = + regmap_update_bits(pchip->regmap, REG_BL_CONF_1, 0x08, + pdata->pin_pwm); + if (ret < 0) + goto out; + + reg_val = (pdata->pin_pwm & 0x40) | pdata->pin_strobe | pdata->pin_tx; + ret = regmap_update_bits(pchip->regmap, REG_IO_CTRL, 0x7C, reg_val); + if (ret < 0) + goto out; + + /* init brightness */ + ret = regmap_write(pchip->regmap, REG_BL_CONF_4, pdata->init_brt_led); + if (ret < 0) + goto out; + + ret = regmap_write(pchip->regmap, REG_BL_CONF_3, pdata->init_brt_led); + if (ret < 0) + goto out; + + /* output pins config. */ + if (!pdata->init_brt_led) { + reg_val = pdata->fled_pins; + reg_val |= pdata->bled_pins; + } else { + reg_val = pdata->fled_pins; + reg_val |= pdata->bled_pins | 0x01; + } + + ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x79, reg_val); + if (ret < 0) + goto out; + + return ret; +out: + dev_err(pchip->dev, "i2c failed to access register\n"); + return ret; +} + +/* update and get brightness */ +static int lm3639_bled_update_status(struct backlight_device *bl) +{ + int ret; + unsigned int reg_val; + struct lm3639_chip_data *pchip = bl_get_data(bl); + struct lm3639_platform_data *pdata = pchip->pdata; + + ret = regmap_read(pchip->regmap, REG_FLAG, ®_val); + if (ret < 0) + goto out; + + if (reg_val != 0) + dev_info(pchip->dev, "last flag is 0x%x\n", reg_val); + + /* pwm control */ + if (pdata->pin_pwm) { + if (pdata->pwm_set_intensity) + pdata->pwm_set_intensity(bl->props.brightness, + pdata->max_brt_led); + else + dev_err(pchip->dev, + "No pwm control func. in plat-data\n"); + return bl->props.brightness; + } + + /* i2c control and set brigtness */ + ret = regmap_write(pchip->regmap, REG_BL_CONF_4, bl->props.brightness); + if (ret < 0) + goto out; + ret = regmap_write(pchip->regmap, REG_BL_CONF_3, bl->props.brightness); + if (ret < 0) + goto out; + + if (!bl->props.brightness) + ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x01, 0x00); + else + ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x01, 0x01); + if (ret < 0) + goto out; + + return bl->props.brightness; +out: + dev_err(pchip->dev, "i2c failed to access registers\n"); + return bl->props.brightness; +} + +static int lm3639_bled_get_brightness(struct backlight_device *bl) +{ + int ret; + unsigned int reg_val; + struct lm3639_chip_data *pchip = bl_get_data(bl); + struct lm3639_platform_data *pdata = pchip->pdata; + + if (pdata->pin_pwm) { + if (pdata->pwm_get_intensity) + bl->props.brightness = pdata->pwm_get_intensity(); + else + dev_err(pchip->dev, + "No pwm control func. in plat-data\n"); + return bl->props.brightness; + } + + ret = regmap_read(pchip->regmap, REG_BL_CONF_1, ®_val); + if (ret < 0) + goto out; + if (reg_val & 0x10) + ret = regmap_read(pchip->regmap, REG_BL_CONF_4, ®_val); + else + ret = regmap_read(pchip->regmap, REG_BL_CONF_3, ®_val); + if (ret < 0) + goto out; + bl->props.brightness = reg_val; + + return bl->props.brightness; +out: + dev_err(pchip->dev, "i2c failed to access register\n"); + return bl->props.brightness; +} + +static const struct backlight_ops lm3639_bled_ops = { + .options = BL_CORE_SUSPENDRESUME, + .update_status = lm3639_bled_update_status, + .get_brightness = lm3639_bled_get_brightness, +}; + +/* backlight mapping mode */ +static ssize_t lm3639_bled_mode_store(struct device *dev, + struct device_attribute *devAttr, + const char *buf, size_t size) +{ + ssize_t ret; + struct lm3639_chip_data *pchip = dev_get_drvdata(dev); + unsigned int state; + + ret = kstrtouint(buf, 10, &state); + if (ret) + goto out_input; + + if (!state) + ret = + regmap_update_bits(pchip->regmap, REG_BL_CONF_1, 0x10, + 0x00); + else + ret = + regmap_update_bits(pchip->regmap, REG_BL_CONF_1, 0x10, + 0x10); + + if (ret < 0) + goto out; + + return size; + +out: + dev_err(pchip->dev, "%s:i2c access fail to register\n", __func__); + return ret; + +out_input: + dev_err(pchip->dev, "%s:input conversion fail\n", __func__); + return ret; + +} + +static DEVICE_ATTR(bled_mode, S_IWUSR, NULL, lm3639_bled_mode_store); + +/* torch */ +static void lm3639_torch_brightness_set(struct led_classdev *cdev, + enum led_brightness brightness) +{ + int ret; + unsigned int reg_val; + struct lm3639_chip_data *pchip; + + pchip = container_of(cdev, struct lm3639_chip_data, cdev_torch); + + ret = regmap_read(pchip->regmap, REG_FLAG, ®_val); + if (ret < 0) + goto out; + if (reg_val != 0) + dev_info(pchip->dev, "last flag is 0x%x\n", reg_val); + + /* brightness 0 means off state */ + if (!brightness) { + ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x06, 0x00); + if (ret < 0) + goto out; + return; + } + + ret = regmap_update_bits(pchip->regmap, + REG_FL_CONF_1, 0x70, (brightness - 1) << 4); + if (ret < 0) + goto out; + ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x06, 0x02); + if (ret < 0) + goto out; + + return; +out: + dev_err(pchip->dev, "i2c failed to access register\n"); +} + +/* flash */ +static void lm3639_flash_brightness_set(struct led_classdev *cdev, + enum led_brightness brightness) +{ + int ret; + unsigned int reg_val; + struct lm3639_chip_data *pchip; + + pchip = container_of(cdev, struct lm3639_chip_data, cdev_flash); + + ret = regmap_read(pchip->regmap, REG_FLAG, ®_val); + if (ret < 0) + goto out; + if (reg_val != 0) + dev_info(pchip->dev, "last flag is 0x%x\n", reg_val); + + /* torch off before flash control */ + ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x06, 0x00); + if (ret < 0) + goto out; + + /* brightness 0 means off state */ + if (!brightness) + return; + + ret = regmap_update_bits(pchip->regmap, + REG_FL_CONF_1, 0x0F, brightness - 1); + if (ret < 0) + goto out; + ret = regmap_update_bits(pchip->regmap, REG_ENABLE, 0x06, 0x06); + if (ret < 0) + goto out; + + return; +out: + dev_err(pchip->dev, "i2c failed to access register\n"); +} + +static const struct regmap_config lm3639_regmap = { + .reg_bits = 8, + .val_bits = 8, + .max_register = REG_MAX, +}; + +static int lm3639_probe(struct i2c_client *client) +{ + int ret; + struct lm3639_chip_data *pchip; + struct lm3639_platform_data *pdata = dev_get_platdata(&client->dev); + struct backlight_properties props; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "i2c functionality check fail.\n"); + return -EOPNOTSUPP; + } + + if (pdata == NULL) { + dev_err(&client->dev, "Needs Platform Data.\n"); + return -ENODATA; + } + + pchip = devm_kzalloc(&client->dev, + sizeof(struct lm3639_chip_data), GFP_KERNEL); + if (!pchip) + return -ENOMEM; + + pchip->pdata = pdata; + pchip->dev = &client->dev; + + pchip->regmap = devm_regmap_init_i2c(client, &lm3639_regmap); + if (IS_ERR(pchip->regmap)) { + ret = PTR_ERR(pchip->regmap); + dev_err(&client->dev, "fail : allocate register map: %d\n", + ret); + return ret; + } + i2c_set_clientdata(client, pchip); + + /* chip initialize */ + ret = lm3639_chip_init(pchip); + if (ret < 0) { + dev_err(&client->dev, "fail : chip init\n"); + goto err_out; + } + + /* backlight */ + props.type = BACKLIGHT_RAW; + props.brightness = pdata->init_brt_led; + props.max_brightness = pdata->max_brt_led; + pchip->bled = + devm_backlight_device_register(pchip->dev, "lm3639_bled", + pchip->dev, pchip, &lm3639_bled_ops, + &props); + if (IS_ERR(pchip->bled)) { + dev_err(&client->dev, "fail : backlight register\n"); + ret = PTR_ERR(pchip->bled); + goto err_out; + } + + ret = device_create_file(&(pchip->bled->dev), &dev_attr_bled_mode); + if (ret < 0) { + dev_err(&client->dev, "failed : add sysfs entries\n"); + goto err_out; + } + + /* flash */ + pchip->cdev_flash.name = "lm3639_flash"; + pchip->cdev_flash.max_brightness = 16; + pchip->cdev_flash.brightness_set = lm3639_flash_brightness_set; + ret = led_classdev_register((struct device *) + &client->dev, &pchip->cdev_flash); + if (ret < 0) { + dev_err(&client->dev, "fail : flash register\n"); + goto err_flash; + } + + /* torch */ + pchip->cdev_torch.name = "lm3639_torch"; + pchip->cdev_torch.max_brightness = 8; + pchip->cdev_torch.brightness_set = lm3639_torch_brightness_set; + ret = led_classdev_register((struct device *) + &client->dev, &pchip->cdev_torch); + if (ret < 0) { + dev_err(&client->dev, "fail : torch register\n"); + goto err_torch; + } + + return 0; + +err_torch: + led_classdev_unregister(&pchip->cdev_flash); +err_flash: + device_remove_file(&(pchip->bled->dev), &dev_attr_bled_mode); +err_out: + return ret; +} + +static void lm3639_remove(struct i2c_client *client) +{ + struct lm3639_chip_data *pchip = i2c_get_clientdata(client); + + regmap_write(pchip->regmap, REG_ENABLE, 0x00); + + led_classdev_unregister(&pchip->cdev_torch); + led_classdev_unregister(&pchip->cdev_flash); + if (pchip->bled) + device_remove_file(&(pchip->bled->dev), &dev_attr_bled_mode); +} + +static const struct i2c_device_id lm3639_id[] = { + {LM3639_NAME, 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, lm3639_id); +static struct i2c_driver lm3639_i2c_driver = { + .driver = { + .name = LM3639_NAME, + }, + .probe_new = lm3639_probe, + .remove = lm3639_remove, + .id_table = lm3639_id, +}; + +module_i2c_driver(lm3639_i2c_driver); + +MODULE_DESCRIPTION("Texas Instruments Backlight+Flash LED driver for LM3639"); +MODULE_AUTHOR("Daniel Jeong "); +MODULE_AUTHOR("Ldd Mlp "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3