From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/video/fbdev/sticore.h | 404 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 404 insertions(+) create mode 100644 drivers/video/fbdev/sticore.h (limited to 'drivers/video/fbdev/sticore.h') diff --git a/drivers/video/fbdev/sticore.h b/drivers/video/fbdev/sticore.h new file mode 100644 index 000000000..0ebdd28a0 --- /dev/null +++ b/drivers/video/fbdev/sticore.h @@ -0,0 +1,404 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef STICORE_H +#define STICORE_H + +/* generic STI structures & functions */ + +#define MAX_STI_ROMS 4 /* max no. of ROMs which this driver handles */ + +#define STI_REGION_MAX 8 /* hardcoded STI constants */ +#define STI_DEV_NAME_LENGTH 32 +#define STI_MONITOR_MAX 256 + +#define STI_FONT_HPROMAN8 1 +#define STI_FONT_KANA8 2 + +#define ALT_CODE_TYPE_UNKNOWN 0x00 /* alt code type values */ +#define ALT_CODE_TYPE_PA_RISC_64 0x01 + +/* The latency of the STI functions cannot really be reduced by setting + * this to 0; STI doesn't seem to be designed to allow calling a different + * function (or the same function with different arguments) after a + * function exited with 1 as return value. + * + * As all of the functions below could be called from interrupt context, + * we have to spin_lock_irqsave around the do { ret = bla(); } while(ret==1) + * block. Really bad latency there. + * + * Probably the best solution to all this is have the generic code manage + * the screen buffer and a kernel thread to call STI occasionally. + * + * Luckily, the frame buffer guys have the same problem so we can just wait + * for them to fix it and steal their solution. prumpf + */ + +#include + +#define STI_WAIT 1 + +#define STI_PTR(p) ( virt_to_phys(p) ) +#define PTR_STI(p) ( phys_to_virt((unsigned long)p) ) + +#define sti_onscreen_x(sti) (sti->glob_cfg->onscreen_x) +#define sti_onscreen_y(sti) (sti->glob_cfg->onscreen_y) + +/* sti_font_xy() use the native font ROM ! */ +#define sti_font_x(sti) (PTR_STI(sti->font)->width) +#define sti_font_y(sti) (PTR_STI(sti->font)->height) + +#ifdef CONFIG_64BIT +#define STI_LOWMEM (GFP_KERNEL | GFP_DMA) +#else +#define STI_LOWMEM (GFP_KERNEL) +#endif + + +/* STI function configuration structs */ + +typedef union region { + struct { + u32 offset : 14; /* offset in 4kbyte page */ + u32 sys_only : 1; /* don't map to user space */ + u32 cache : 1; /* map to data cache */ + u32 btlb : 1; /* map to block tlb */ + u32 last : 1; /* last region in list */ + u32 length : 14; /* length in 4kbyte page */ + } region_desc; + + u32 region; /* complete region value */ +} region_t; + +#define REGION_OFFSET_TO_PHYS( rt, hpa ) \ + (((rt).region_desc.offset << 12) + (hpa)) + +struct sti_glob_cfg_ext { + u8 curr_mon; /* current monitor configured */ + u8 friendly_boot; /* in friendly boot mode */ + s16 power; /* power calculation (in Watts) */ + s32 freq_ref; /* frequency reference */ + u32 sti_mem_addr; /* pointer to global sti memory (size=sti_mem_request) */ + u32 future_ptr; /* pointer to future data */ +}; + +struct sti_glob_cfg { + s32 text_planes; /* number of planes used for text */ + s16 onscreen_x; /* screen width in pixels */ + s16 onscreen_y; /* screen height in pixels */ + s16 offscreen_x; /* offset width in pixels */ + s16 offscreen_y; /* offset height in pixels */ + s16 total_x; /* frame buffer width in pixels */ + s16 total_y; /* frame buffer height in pixels */ + u32 region_ptrs[STI_REGION_MAX]; /* region pointers */ + s32 reent_lvl; /* storage for reentry level value */ + u32 save_addr; /* where to save or restore reentrant state */ + u32 ext_ptr; /* pointer to extended glob_cfg data structure */ +}; + + +/* STI init function structs */ + +struct sti_init_flags { + u32 wait : 1; /* should routine idle wait or not */ + u32 reset : 1; /* hard reset the device? */ + u32 text : 1; /* turn on text display planes? */ + u32 nontext : 1; /* turn on non-text display planes? */ + u32 clear : 1; /* clear text display planes? */ + u32 cmap_blk : 1; /* non-text planes cmap black? */ + u32 enable_be_timer : 1; /* enable bus error timer */ + u32 enable_be_int : 1; /* enable bus error timer interrupt */ + u32 no_chg_tx : 1; /* don't change text settings */ + u32 no_chg_ntx : 1; /* don't change non-text settings */ + u32 no_chg_bet : 1; /* don't change berr timer settings */ + u32 no_chg_bei : 1; /* don't change berr int settings */ + u32 init_cmap_tx : 1; /* initialize cmap for text planes */ + u32 cmt_chg : 1; /* change current monitor type */ + u32 retain_ie : 1; /* don't allow reset to clear int enables */ + u32 caller_bootrom : 1; /* set only by bootrom for each call */ + u32 caller_kernel : 1; /* set only by kernel for each call */ + u32 caller_other : 1; /* set only by non-[BR/K] caller */ + u32 pad : 14; /* pad to word boundary */ + u32 future_ptr; /* pointer to future data */ +}; + +struct sti_init_inptr_ext { + u8 config_mon_type; /* configure to monitor type */ + u8 pad[1]; /* pad to word boundary */ + u16 inflight_data; /* inflight data possible on PCI */ + u32 future_ptr; /* pointer to future data */ +}; + +struct sti_init_inptr { + s32 text_planes; /* number of planes to use for text */ + u32 ext_ptr; /* pointer to extended init_graph inptr data structure*/ +}; + + +struct sti_init_outptr { + s32 errno; /* error number on failure */ + s32 text_planes; /* number of planes used for text */ + u32 future_ptr; /* pointer to future data */ +}; + + + +/* STI configuration function structs */ + +struct sti_conf_flags { + u32 wait : 1; /* should routine idle wait or not */ + u32 pad : 31; /* pad to word boundary */ + u32 future_ptr; /* pointer to future data */ +}; + +struct sti_conf_inptr { + u32 future_ptr; /* pointer to future data */ +}; + +struct sti_conf_outptr_ext { + u32 crt_config[3]; /* hardware specific X11/OGL information */ + u32 crt_hdw[3]; + u32 future_ptr; +}; + +struct sti_conf_outptr { + s32 errno; /* error number on failure */ + s16 onscreen_x; /* screen width in pixels */ + s16 onscreen_y; /* screen height in pixels */ + s16 offscreen_x; /* offscreen width in pixels */ + s16 offscreen_y; /* offscreen height in pixels */ + s16 total_x; /* frame buffer width in pixels */ + s16 total_y; /* frame buffer height in pixels */ + s32 bits_per_pixel; /* bits/pixel device has configured */ + s32 bits_used; /* bits which can be accessed */ + s32 planes; /* number of fb planes in system */ + u8 dev_name[STI_DEV_NAME_LENGTH]; /* null terminated product name */ + u32 attributes; /* flags denoting attributes */ + u32 ext_ptr; /* pointer to future data */ +}; + +struct sti_rom { + u8 type[4]; + u8 res004; + u8 num_mons; + u8 revno[2]; + u32 graphics_id[2]; + + u32 font_start; + u32 statesize; + u32 last_addr; + u32 region_list; + + u16 reentsize; + u16 maxtime; + u32 mon_tbl_addr; + u32 user_data_addr; + u32 sti_mem_req; + + u32 user_data_size; + u16 power; + u8 bus_support; + u8 ext_bus_support; + u8 alt_code_type; + u8 ext_dd_struct[3]; + u32 cfb_addr; + + u32 init_graph; + u32 state_mgmt; + u32 font_unpmv; + u32 block_move; + u32 self_test; + u32 excep_hdlr; + u32 inq_conf; + u32 set_cm_entry; + u32 dma_ctrl; + u8 res040[7 * 4]; + + u32 init_graph_addr; + u32 state_mgmt_addr; + u32 font_unp_addr; + u32 block_move_addr; + u32 self_test_addr; + u32 excep_hdlr_addr; + u32 inq_conf_addr; + u32 set_cm_entry_addr; + u32 image_unpack_addr; + u32 pa_risx_addrs[7]; +}; + +struct sti_rom_font { + u16 first_char; + u16 last_char; + u8 width; + u8 height; + u8 font_type; /* language type */ + u8 bytes_per_char; + u32 next_font; + u8 underline_height; + u8 underline_pos; + u8 res008[2]; +}; + +/* sticore internal font handling */ + +struct sti_cooked_font { + struct sti_rom_font *raw; /* native ptr for STI functions */ + void *raw_ptr; /* kmalloc'ed font data */ + struct sti_cooked_font *next_font; + int height, width; + int refcount; + u32 crc; +}; + +struct sti_cooked_rom { + struct sti_rom *raw; + struct sti_cooked_font *font_start; +}; + +/* STI font printing function structs */ + +struct sti_font_inptr { + u32 font_start_addr; /* address of font start */ + s16 index; /* index into font table of character */ + u8 fg_color; /* foreground color of character */ + u8 bg_color; /* background color of character */ + s16 dest_x; /* X location of character upper left */ + s16 dest_y; /* Y location of character upper left */ + u32 future_ptr; /* pointer to future data */ +}; + +struct sti_font_flags { + u32 wait : 1; /* should routine idle wait or not */ + u32 non_text : 1; /* font unpack/move in non_text planes =1, text =0 */ + u32 pad : 30; /* pad to word boundary */ + u32 future_ptr; /* pointer to future data */ +}; + +struct sti_font_outptr { + s32 errno; /* error number on failure */ + u32 future_ptr; /* pointer to future data */ +}; + +/* STI blockmove structs */ + +struct sti_blkmv_flags { + u32 wait : 1; /* should routine idle wait or not */ + u32 color : 1; /* change color during move? */ + u32 clear : 1; /* clear during move? */ + u32 non_text : 1; /* block move in non_text planes =1, text =0 */ + u32 pad : 28; /* pad to word boundary */ + u32 future_ptr; /* pointer to future data */ +}; + +struct sti_blkmv_inptr { + u8 fg_color; /* foreground color after move */ + u8 bg_color; /* background color after move */ + s16 src_x; /* source upper left pixel x location */ + s16 src_y; /* source upper left pixel y location */ + s16 dest_x; /* dest upper left pixel x location */ + s16 dest_y; /* dest upper left pixel y location */ + s16 width; /* block width in pixels */ + s16 height; /* block height in pixels */ + u32 future_ptr; /* pointer to future data */ +}; + +struct sti_blkmv_outptr { + s32 errno; /* error number on failure */ + u32 future_ptr; /* pointer to future data */ +}; + + +/* sti_all_data is an internal struct which needs to be allocated in + * low memory (< 4GB) if STI is used with 32bit STI on a 64bit kernel */ + +struct sti_all_data { + struct sti_glob_cfg glob_cfg; + struct sti_glob_cfg_ext glob_cfg_ext; + + struct sti_conf_inptr inq_inptr; + struct sti_conf_outptr inq_outptr; /* configuration */ + struct sti_conf_outptr_ext inq_outptr_ext; + + struct sti_init_inptr_ext init_inptr_ext; + struct sti_init_inptr init_inptr; + struct sti_init_outptr init_outptr; + + struct sti_blkmv_inptr blkmv_inptr; + struct sti_blkmv_outptr blkmv_outptr; + + struct sti_font_inptr font_inptr; + struct sti_font_outptr font_outptr; + + /* leave as last entries */ + unsigned long save_addr[1024 / sizeof(unsigned long)]; + /* min 256 bytes which is STI default, max sti->sti_mem_request */ + unsigned long sti_mem_addr[256 / sizeof(unsigned long)]; + /* do not add something below here ! */ +}; + +/* internal generic STI struct */ + +struct sti_struct { + spinlock_t lock; + + /* char **mon_strings; */ + int sti_mem_request; + u32 graphics_id[2]; + + struct sti_cooked_rom *rom; + + unsigned long font_unpmv; + unsigned long block_move; + unsigned long init_graph; + unsigned long inq_conf; + + /* all following fields are initialized by the generic routines */ + int text_planes; + region_t regions[STI_REGION_MAX]; + unsigned long regions_phys[STI_REGION_MAX]; + + struct sti_glob_cfg *glob_cfg; /* points into sti_all_data */ + + int wordmode; + struct sti_cooked_font *font; /* ptr to selected font (cooked) */ + + struct pci_dev *pd; + + /* PCI data structures (pg. 17ff from sti.pdf) */ + u8 rm_entry[16]; /* pci region mapper array == pci config space offset */ + + /* pointer to the fb_info where this STI device is used */ + struct fb_info *info; + + /* pointer to all internal data */ + struct sti_all_data *sti_data; + + /* pa_path of this device */ + char pa_path[24]; +}; + + +/* sticore interface functions */ + +struct sti_struct *sti_get_rom(unsigned int index); /* 0: default sti */ +void sti_font_convert_bytemode(struct sti_struct *sti, struct sti_cooked_font *f); + + +/* sticore main function to call STI firmware */ + +int sti_call(const struct sti_struct *sti, unsigned long func, + const void *flags, void *inptr, void *outptr, + struct sti_glob_cfg *glob_cfg); + + +/* functions to call the STI ROM directly */ + +void sti_putc(struct sti_struct *sti, int c, int y, int x, + struct sti_cooked_font *font); +void sti_set(struct sti_struct *sti, int src_y, int src_x, + int height, int width, u8 color); +void sti_clear(struct sti_struct *sti, int src_y, int src_x, + int height, int width, int c, struct sti_cooked_font *font); +void sti_bmove(struct sti_struct *sti, int src_y, int src_x, + int dst_y, int dst_x, int height, int width, + struct sti_cooked_font *font); + +#endif /* STICORE_H */ -- cgit v1.2.3