From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/watchdog/at91sam9_wdt.c | 418 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 418 insertions(+) create mode 100644 drivers/watchdog/at91sam9_wdt.c (limited to 'drivers/watchdog/at91sam9_wdt.c') diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c new file mode 100644 index 000000000..292b5a1ca --- /dev/null +++ b/drivers/watchdog/at91sam9_wdt.c @@ -0,0 +1,418 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Watchdog driver for Atmel AT91SAM9x processors. + * + * Copyright (C) 2008 Renaud CERRATO r.cerrato@til-technologies.fr + * + */ + +/* + * The Watchdog Timer Mode Register can be only written to once. If the + * timeout need to be set from Linux, be sure that the bootstrap or the + * bootloader doesn't write to this register. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "at91sam9_wdt.h" + +#define DRV_NAME "AT91SAM9 Watchdog" + +#define wdt_read(wdt, field) \ + readl_relaxed((wdt)->base + (field)) +#define wdt_write(wtd, field, val) \ + writel_relaxed((val), (wdt)->base + (field)) + +/* AT91SAM9 watchdog runs a 12bit counter @ 256Hz, + * use this to convert a watchdog + * value from/to milliseconds. + */ +#define ticks_to_hz_rounddown(t) ((((t) + 1) * HZ) >> 8) +#define ticks_to_hz_roundup(t) (((((t) + 1) * HZ) + 255) >> 8) +#define ticks_to_secs(t) (((t) + 1) >> 8) +#define secs_to_ticks(s) ((s) ? (((s) << 8) - 1) : 0) + +#define WDT_MR_RESET 0x3FFF2FFF + +/* Watchdog max counter value in ticks */ +#define WDT_COUNTER_MAX_TICKS 0xFFF + +/* Watchdog max delta/value in secs */ +#define WDT_COUNTER_MAX_SECS ticks_to_secs(WDT_COUNTER_MAX_TICKS) + +/* Hardware timeout in seconds */ +#define WDT_HW_TIMEOUT 2 + +/* Timer heartbeat (500ms) */ +#define WDT_TIMEOUT (HZ/2) + +/* User land timeout */ +#define WDT_HEARTBEAT 15 +static int heartbeat; +module_param(heartbeat, int, 0); +MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds. " + "(default = " __MODULE_STRING(WDT_HEARTBEAT) ")"); + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started " + "(default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +#define to_wdt(wdd) container_of(wdd, struct at91wdt, wdd) +struct at91wdt { + struct watchdog_device wdd; + void __iomem *base; + unsigned long next_heartbeat; /* the next_heartbeat for the timer */ + struct timer_list timer; /* The timer that pings the watchdog */ + u32 mr; + u32 mr_mask; + unsigned long heartbeat; /* WDT heartbeat in jiffies */ + bool nowayout; + unsigned int irq; + struct clk *sclk; +}; + +/* ......................................................................... */ + +static irqreturn_t wdt_interrupt(int irq, void *dev_id) +{ + struct at91wdt *wdt = (struct at91wdt *)dev_id; + + if (wdt_read(wdt, AT91_WDT_SR)) { + pr_crit("at91sam9 WDT software reset\n"); + emergency_restart(); + pr_crit("Reboot didn't ?????\n"); + } + + return IRQ_HANDLED; +} + +/* + * Reload the watchdog timer. (ie, pat the watchdog) + */ +static inline void at91_wdt_reset(struct at91wdt *wdt) +{ + wdt_write(wdt, AT91_WDT_CR, AT91_WDT_KEY | AT91_WDT_WDRSTT); +} + +/* + * Timer tick + */ +static void at91_ping(struct timer_list *t) +{ + struct at91wdt *wdt = from_timer(wdt, t, timer); + if (time_before(jiffies, wdt->next_heartbeat) || + !watchdog_active(&wdt->wdd)) { + at91_wdt_reset(wdt); + mod_timer(&wdt->timer, jiffies + wdt->heartbeat); + } else { + pr_crit("I will reset your machine !\n"); + } +} + +static int at91_wdt_start(struct watchdog_device *wdd) +{ + struct at91wdt *wdt = to_wdt(wdd); + /* calculate when the next userspace timeout will be */ + wdt->next_heartbeat = jiffies + wdd->timeout * HZ; + return 0; +} + +static int at91_wdt_stop(struct watchdog_device *wdd) +{ + /* The watchdog timer hardware can not be stopped... */ + return 0; +} + +static int at91_wdt_set_timeout(struct watchdog_device *wdd, unsigned int new_timeout) +{ + wdd->timeout = new_timeout; + return at91_wdt_start(wdd); +} + +static int at91_wdt_init(struct platform_device *pdev, struct at91wdt *wdt) +{ + u32 tmp; + u32 delta; + u32 value; + int err; + u32 mask = wdt->mr_mask; + unsigned long min_heartbeat = 1; + unsigned long max_heartbeat; + struct device *dev = &pdev->dev; + + tmp = wdt_read(wdt, AT91_WDT_MR); + if ((tmp & mask) != (wdt->mr & mask)) { + if (tmp == WDT_MR_RESET) { + wdt_write(wdt, AT91_WDT_MR, wdt->mr); + tmp = wdt_read(wdt, AT91_WDT_MR); + } + } + + if (tmp & AT91_WDT_WDDIS) { + if (wdt->mr & AT91_WDT_WDDIS) + return 0; + dev_err(dev, "watchdog is disabled\n"); + return -EINVAL; + } + + value = tmp & AT91_WDT_WDV; + delta = (tmp & AT91_WDT_WDD) >> 16; + + if (delta < value) + min_heartbeat = ticks_to_hz_roundup(value - delta); + + max_heartbeat = ticks_to_hz_rounddown(value); + if (!max_heartbeat) { + dev_err(dev, + "heartbeat is too small for the system to handle it correctly\n"); + return -EINVAL; + } + + /* + * Try to reset the watchdog counter 4 or 2 times more often than + * actually requested, to avoid spurious watchdog reset. + * If this is not possible because of the min_heartbeat value, reset + * it at the min_heartbeat period. + */ + if ((max_heartbeat / 4) >= min_heartbeat) + wdt->heartbeat = max_heartbeat / 4; + else if ((max_heartbeat / 2) >= min_heartbeat) + wdt->heartbeat = max_heartbeat / 2; + else + wdt->heartbeat = min_heartbeat; + + if (max_heartbeat < min_heartbeat + 4) + dev_warn(dev, + "min heartbeat and max heartbeat might be too close for the system to handle it correctly\n"); + + if ((tmp & AT91_WDT_WDFIEN) && wdt->irq) { + err = request_irq(wdt->irq, wdt_interrupt, + IRQF_SHARED | IRQF_IRQPOLL | + IRQF_NO_SUSPEND, + pdev->name, wdt); + if (err) + return err; + } + + if ((tmp & wdt->mr_mask) != (wdt->mr & wdt->mr_mask)) + dev_warn(dev, + "watchdog already configured differently (mr = %x expecting %x)\n", + tmp & wdt->mr_mask, wdt->mr & wdt->mr_mask); + + timer_setup(&wdt->timer, at91_ping, 0); + + /* + * Use min_heartbeat the first time to avoid spurious watchdog reset: + * we don't know for how long the watchdog counter is running, and + * - resetting it right now might trigger a watchdog fault reset + * - waiting for heartbeat time might lead to a watchdog timeout + * reset + */ + mod_timer(&wdt->timer, jiffies + min_heartbeat); + + /* Try to set timeout from device tree first */ + if (watchdog_init_timeout(&wdt->wdd, 0, dev)) + watchdog_init_timeout(&wdt->wdd, heartbeat, dev); + watchdog_set_nowayout(&wdt->wdd, wdt->nowayout); + err = watchdog_register_device(&wdt->wdd); + if (err) + goto out_stop_timer; + + wdt->next_heartbeat = jiffies + wdt->wdd.timeout * HZ; + + return 0; + +out_stop_timer: + del_timer(&wdt->timer); + return err; +} + +/* ......................................................................... */ + +static const struct watchdog_info at91_wdt_info = { + .identity = DRV_NAME, + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | + WDIOF_MAGICCLOSE, +}; + +static const struct watchdog_ops at91_wdt_ops = { + .owner = THIS_MODULE, + .start = at91_wdt_start, + .stop = at91_wdt_stop, + .set_timeout = at91_wdt_set_timeout, +}; + +#if defined(CONFIG_OF) +static int of_at91wdt_init(struct device_node *np, struct at91wdt *wdt) +{ + u32 min = 0; + u32 max = WDT_COUNTER_MAX_SECS; + const char *tmp; + + /* Get the interrupts property */ + wdt->irq = irq_of_parse_and_map(np, 0); + if (!wdt->irq) + dev_warn(wdt->wdd.parent, "failed to get IRQ from DT\n"); + + if (!of_property_read_u32_index(np, "atmel,max-heartbeat-sec", 0, + &max)) { + if (!max || max > WDT_COUNTER_MAX_SECS) + max = WDT_COUNTER_MAX_SECS; + + if (!of_property_read_u32_index(np, "atmel,min-heartbeat-sec", + 0, &min)) { + if (min >= max) + min = max - 1; + } + } + + min = secs_to_ticks(min); + max = secs_to_ticks(max); + + wdt->mr_mask = 0x3FFFFFFF; + wdt->mr = 0; + if (!of_property_read_string(np, "atmel,watchdog-type", &tmp) && + !strcmp(tmp, "software")) { + wdt->mr |= AT91_WDT_WDFIEN; + wdt->mr_mask &= ~AT91_WDT_WDRPROC; + } else { + wdt->mr |= AT91_WDT_WDRSTEN; + } + + if (!of_property_read_string(np, "atmel,reset-type", &tmp) && + !strcmp(tmp, "proc")) + wdt->mr |= AT91_WDT_WDRPROC; + + if (of_property_read_bool(np, "atmel,disable")) { + wdt->mr |= AT91_WDT_WDDIS; + wdt->mr_mask &= AT91_WDT_WDDIS; + } + + if (of_property_read_bool(np, "atmel,idle-halt")) + wdt->mr |= AT91_WDT_WDIDLEHLT; + + if (of_property_read_bool(np, "atmel,dbg-halt")) + wdt->mr |= AT91_WDT_WDDBGHLT; + + wdt->mr |= max | ((max - min) << 16); + + return 0; +} +#else +static inline int of_at91wdt_init(struct device_node *np, struct at91wdt *wdt) +{ + return 0; +} +#endif + +static int __init at91wdt_probe(struct platform_device *pdev) +{ + int err; + struct at91wdt *wdt; + + wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL); + if (!wdt) + return -ENOMEM; + + wdt->mr = (WDT_HW_TIMEOUT * 256) | AT91_WDT_WDRSTEN | AT91_WDT_WDD | + AT91_WDT_WDDBGHLT | AT91_WDT_WDIDLEHLT; + wdt->mr_mask = 0x3FFFFFFF; + wdt->nowayout = nowayout; + wdt->wdd.parent = &pdev->dev; + wdt->wdd.info = &at91_wdt_info; + wdt->wdd.ops = &at91_wdt_ops; + wdt->wdd.timeout = WDT_HEARTBEAT; + wdt->wdd.min_timeout = 1; + wdt->wdd.max_timeout = 0xFFFF; + + wdt->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(wdt->base)) + return PTR_ERR(wdt->base); + + wdt->sclk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(wdt->sclk)) + return PTR_ERR(wdt->sclk); + + err = clk_prepare_enable(wdt->sclk); + if (err) { + dev_err(&pdev->dev, "Could not enable slow clock\n"); + return err; + } + + if (pdev->dev.of_node) { + err = of_at91wdt_init(pdev->dev.of_node, wdt); + if (err) + goto err_clk; + } + + err = at91_wdt_init(pdev, wdt); + if (err) + goto err_clk; + + platform_set_drvdata(pdev, wdt); + + pr_info("enabled (heartbeat=%d sec, nowayout=%d)\n", + wdt->wdd.timeout, wdt->nowayout); + + return 0; + +err_clk: + clk_disable_unprepare(wdt->sclk); + + return err; +} + +static int __exit at91wdt_remove(struct platform_device *pdev) +{ + struct at91wdt *wdt = platform_get_drvdata(pdev); + watchdog_unregister_device(&wdt->wdd); + + pr_warn("I quit now, hardware will probably reboot!\n"); + del_timer(&wdt->timer); + clk_disable_unprepare(wdt->sclk); + + return 0; +} + +#if defined(CONFIG_OF) +static const struct of_device_id at91_wdt_dt_ids[] = { + { .compatible = "atmel,at91sam9260-wdt" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, at91_wdt_dt_ids); +#endif + +static struct platform_driver at91wdt_driver = { + .remove = __exit_p(at91wdt_remove), + .driver = { + .name = "at91_wdt", + .of_match_table = of_match_ptr(at91_wdt_dt_ids), + }, +}; + +module_platform_driver_probe(at91wdt_driver, at91wdt_probe); + +MODULE_AUTHOR("Renaud CERRATO "); +MODULE_DESCRIPTION("Watchdog driver for Atmel AT91SAM9x processors"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3