From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/watchdog/simatic-ipc-wdt.c | 229 +++++++++++++++++++++++++++++++++++++ 1 file changed, 229 insertions(+) create mode 100644 drivers/watchdog/simatic-ipc-wdt.c (limited to 'drivers/watchdog/simatic-ipc-wdt.c') diff --git a/drivers/watchdog/simatic-ipc-wdt.c b/drivers/watchdog/simatic-ipc-wdt.c new file mode 100644 index 000000000..6599695dc --- /dev/null +++ b/drivers/watchdog/simatic-ipc-wdt.c @@ -0,0 +1,229 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Siemens SIMATIC IPC driver for Watchdogs + * + * Copyright (c) Siemens AG, 2020-2021 + * + * Authors: + * Gerd Haeussler + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define WD_ENABLE_IOADR 0x62 +#define WD_TRIGGER_IOADR 0x66 +#define GPIO_COMMUNITY0_PORT_ID 0xaf +#define PAD_CFG_DW0_GPP_A_23 0x4b8 +#define SAFE_EN_N_427E 0x01 +#define SAFE_EN_N_227E 0x04 +#define WD_ENABLED 0x01 +#define WD_TRIGGERED 0x80 +#define WD_MACROMODE 0x02 + +#define TIMEOUT_MIN 2 +#define TIMEOUT_DEF 64 +#define TIMEOUT_MAX 64 + +#define GP_STATUS_REG_227E 0x404D /* IO PORT for SAFE_EN_N on 227E */ + +static bool nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0000); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static struct resource gp_status_reg_227e_res = + DEFINE_RES_IO_NAMED(GP_STATUS_REG_227E, SZ_1, KBUILD_MODNAME); + +static struct resource io_resource_enable = + DEFINE_RES_IO_NAMED(WD_ENABLE_IOADR, SZ_1, + KBUILD_MODNAME " WD_ENABLE_IOADR"); + +static struct resource io_resource_trigger = + DEFINE_RES_IO_NAMED(WD_TRIGGER_IOADR, SZ_1, + KBUILD_MODNAME " WD_TRIGGER_IOADR"); + +/* the actual start will be discovered with p2sb, 0 is a placeholder */ +static struct resource mem_resource = + DEFINE_RES_MEM_NAMED(0, 0, "WD_RESET_BASE_ADR"); + +static u32 wd_timeout_table[] = {2, 4, 6, 8, 16, 32, 48, 64 }; +static void __iomem *wd_reset_base_addr; + +static int wd_start(struct watchdog_device *wdd) +{ + outb(inb(WD_ENABLE_IOADR) | WD_ENABLED, WD_ENABLE_IOADR); + return 0; +} + +static int wd_stop(struct watchdog_device *wdd) +{ + outb(inb(WD_ENABLE_IOADR) & ~WD_ENABLED, WD_ENABLE_IOADR); + return 0; +} + +static int wd_ping(struct watchdog_device *wdd) +{ + inb(WD_TRIGGER_IOADR); + return 0; +} + +static int wd_set_timeout(struct watchdog_device *wdd, unsigned int t) +{ + int timeout_idx = find_closest(t, wd_timeout_table, + ARRAY_SIZE(wd_timeout_table)); + + outb((inb(WD_ENABLE_IOADR) & 0xc7) | timeout_idx << 3, WD_ENABLE_IOADR); + wdd->timeout = wd_timeout_table[timeout_idx]; + return 0; +} + +static const struct watchdog_info wdt_ident = { + .options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING | + WDIOF_SETTIMEOUT, + .identity = KBUILD_MODNAME, +}; + +static const struct watchdog_ops wdt_ops = { + .owner = THIS_MODULE, + .start = wd_start, + .stop = wd_stop, + .ping = wd_ping, + .set_timeout = wd_set_timeout, +}; + +static void wd_secondary_enable(u32 wdtmode) +{ + u16 resetbit; + + /* set safe_en_n so we are not just WDIOF_ALARMONLY */ + if (wdtmode == SIMATIC_IPC_DEVICE_227E) { + /* enable SAFE_EN_N on GP_STATUS_REG_227E */ + resetbit = inb(GP_STATUS_REG_227E); + outb(resetbit & ~SAFE_EN_N_227E, GP_STATUS_REG_227E); + } else { + /* enable SAFE_EN_N on PCH D1600 */ + resetbit = ioread16(wd_reset_base_addr); + iowrite16(resetbit & ~SAFE_EN_N_427E, wd_reset_base_addr); + } +} + +static int wd_setup(u32 wdtmode) +{ + unsigned int bootstatus = 0; + int timeout_idx; + + timeout_idx = find_closest(TIMEOUT_DEF, wd_timeout_table, + ARRAY_SIZE(wd_timeout_table)); + + if (inb(WD_ENABLE_IOADR) & WD_TRIGGERED) + bootstatus |= WDIOF_CARDRESET; + + /* reset alarm bit, set macro mode, and set timeout */ + outb(WD_TRIGGERED | WD_MACROMODE | timeout_idx << 3, WD_ENABLE_IOADR); + + wd_secondary_enable(wdtmode); + + return bootstatus; +} + +static struct watchdog_device wdd_data = { + .info = &wdt_ident, + .ops = &wdt_ops, + .min_timeout = TIMEOUT_MIN, + .max_timeout = TIMEOUT_MAX +}; + +static int simatic_ipc_wdt_probe(struct platform_device *pdev) +{ + struct simatic_ipc_platform *plat = pdev->dev.platform_data; + struct device *dev = &pdev->dev; + struct resource *res; + int ret; + + switch (plat->devmode) { + case SIMATIC_IPC_DEVICE_227E: + if (!devm_request_region(dev, gp_status_reg_227e_res.start, + resource_size(&gp_status_reg_227e_res), + KBUILD_MODNAME)) { + dev_err(dev, + "Unable to register IO resource at %pR\n", + &gp_status_reg_227e_res); + return -EBUSY; + } + fallthrough; + case SIMATIC_IPC_DEVICE_427E: + wdd_data.parent = dev; + break; + default: + return -EINVAL; + } + + if (!devm_request_region(dev, io_resource_enable.start, + resource_size(&io_resource_enable), + io_resource_enable.name)) { + dev_err(dev, + "Unable to register IO resource at %#x\n", + WD_ENABLE_IOADR); + return -EBUSY; + } + + if (!devm_request_region(dev, io_resource_trigger.start, + resource_size(&io_resource_trigger), + io_resource_trigger.name)) { + dev_err(dev, + "Unable to register IO resource at %#x\n", + WD_TRIGGER_IOADR); + return -EBUSY; + } + + if (plat->devmode == SIMATIC_IPC_DEVICE_427E) { + res = &mem_resource; + + ret = p2sb_bar(NULL, 0, res); + if (ret) + return ret; + + /* do the final address calculation */ + res->start = res->start + (GPIO_COMMUNITY0_PORT_ID << 16) + + PAD_CFG_DW0_GPP_A_23; + res->end = res->start + SZ_4 - 1; + + wd_reset_base_addr = devm_ioremap_resource(dev, res); + if (IS_ERR(wd_reset_base_addr)) + return PTR_ERR(wd_reset_base_addr); + } + + wdd_data.bootstatus = wd_setup(plat->devmode); + if (wdd_data.bootstatus) + dev_warn(dev, "last reboot caused by watchdog reset\n"); + + watchdog_set_nowayout(&wdd_data, nowayout); + watchdog_stop_on_reboot(&wdd_data); + return devm_watchdog_register_device(dev, &wdd_data); +} + +static struct platform_driver simatic_ipc_wdt_driver = { + .probe = simatic_ipc_wdt_probe, + .driver = { + .name = KBUILD_MODNAME, + }, +}; + +module_platform_driver(simatic_ipc_wdt_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" KBUILD_MODNAME); +MODULE_AUTHOR("Gerd Haeussler "); -- cgit v1.2.3