From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/xen/platform-pci.c | 193 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 193 insertions(+) create mode 100644 drivers/xen/platform-pci.c (limited to 'drivers/xen/platform-pci.c') diff --git a/drivers/xen/platform-pci.c b/drivers/xen/platform-pci.c new file mode 100644 index 000000000..fcc819131 --- /dev/null +++ b/drivers/xen/platform-pci.c @@ -0,0 +1,193 @@ +// SPDX-License-Identifier: GPL-2.0-only +/****************************************************************************** + * platform-pci.c + * + * Xen platform PCI device driver + * + * Authors: ssmith@xensource.com and stefano.stabellini@eu.citrix.com + * + * Copyright (c) 2005, Intel Corporation. + * Copyright (c) 2007, XenSource Inc. + * Copyright (c) 2010, Citrix + */ + + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "xen-platform-pci" + +static unsigned long platform_mmio; +static unsigned long platform_mmio_alloc; +static unsigned long platform_mmiolen; +static uint64_t callback_via; + +static unsigned long alloc_xen_mmio(unsigned long len) +{ + unsigned long addr; + + addr = platform_mmio + platform_mmio_alloc; + platform_mmio_alloc += len; + BUG_ON(platform_mmio_alloc > platform_mmiolen); + + return addr; +} + +static uint64_t get_callback_via(struct pci_dev *pdev) +{ + u8 pin; + int irq; + + irq = pdev->irq; + if (irq < 16) + return irq; /* ISA IRQ */ + + pin = pdev->pin; + + /* We don't know the GSI. Specify the PCI INTx line instead. */ + return ((uint64_t)HVM_PARAM_CALLBACK_TYPE_PCI_INTX << + HVM_CALLBACK_VIA_TYPE_SHIFT) | + ((uint64_t)pci_domain_nr(pdev->bus) << 32) | + ((uint64_t)pdev->bus->number << 16) | + ((uint64_t)(pdev->devfn & 0xff) << 8) | + ((uint64_t)(pin - 1) & 3); +} + +static irqreturn_t do_hvm_evtchn_intr(int irq, void *dev_id) +{ + return xen_hvm_evtchn_do_upcall(); +} + +static int xen_allocate_irq(struct pci_dev *pdev) +{ + return request_irq(pdev->irq, do_hvm_evtchn_intr, + IRQF_NOBALANCING | IRQF_SHARED, + "xen-platform-pci", pdev); +} + +static int platform_pci_resume(struct device *dev) +{ + int err; + + if (xen_have_vector_callback) + return 0; + + err = xen_set_callback_via(callback_via); + if (err) { + dev_err(dev, "platform_pci_resume failure!\n"); + return err; + } + return 0; +} + +static int platform_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int i, ret; + long ioaddr; + long mmio_addr, mmio_len; + unsigned int max_nr_gframes; + unsigned long grant_frames; + + if (!xen_domain()) + return -ENODEV; + + i = pci_enable_device(pdev); + if (i) + return i; + + ioaddr = pci_resource_start(pdev, 0); + + mmio_addr = pci_resource_start(pdev, 1); + mmio_len = pci_resource_len(pdev, 1); + + if (mmio_addr == 0 || ioaddr == 0) { + dev_err(&pdev->dev, "no resources found\n"); + ret = -ENOENT; + goto pci_out; + } + + ret = pci_request_region(pdev, 1, DRV_NAME); + if (ret < 0) + goto pci_out; + + ret = pci_request_region(pdev, 0, DRV_NAME); + if (ret < 0) + goto mem_out; + + platform_mmio = mmio_addr; + platform_mmiolen = mmio_len; + if (!xen_have_vector_callback) { + ret = xen_allocate_irq(pdev); + if (ret) { + dev_warn(&pdev->dev, "request_irq failed err=%d\n", ret); + goto out; + } + /* + * It doesn't strictly *have* to run on CPU0 but it sure + * as hell better process the event channel ports delivered + * to CPU0. + */ + irq_set_affinity(pdev->irq, cpumask_of(0)); + + callback_via = get_callback_via(pdev); + ret = xen_set_callback_via(callback_via); + if (ret) { + dev_warn(&pdev->dev, "Unable to set the evtchn callback " + "err=%d\n", ret); + goto irq_out; + } + } + + max_nr_gframes = gnttab_max_grant_frames(); + grant_frames = alloc_xen_mmio(PAGE_SIZE * max_nr_gframes); + ret = gnttab_setup_auto_xlat_frames(grant_frames); + if (ret) + goto irq_out; + ret = gnttab_init(); + if (ret) + goto grant_out; + return 0; +grant_out: + gnttab_free_auto_xlat_frames(); +irq_out: + if (!xen_have_vector_callback) + free_irq(pdev->irq, pdev); +out: + pci_release_region(pdev, 0); +mem_out: + pci_release_region(pdev, 1); +pci_out: + pci_disable_device(pdev); + return ret; +} + +static const struct pci_device_id platform_pci_tbl[] = { + {PCI_VENDOR_ID_XEN, PCI_DEVICE_ID_XEN_PLATFORM, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {0,} +}; + +static const struct dev_pm_ops platform_pm_ops = { + .resume_noirq = platform_pci_resume, +}; + +static struct pci_driver platform_driver = { + .name = DRV_NAME, + .probe = platform_pci_probe, + .id_table = platform_pci_tbl, + .driver = { + .pm = &platform_pm_ops, + }, +}; + +builtin_pci_driver(platform_driver); -- cgit v1.2.3