From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- fs/crypto/inline_crypt.c | 479 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 479 insertions(+) create mode 100644 fs/crypto/inline_crypt.c (limited to 'fs/crypto/inline_crypt.c') diff --git a/fs/crypto/inline_crypt.c b/fs/crypto/inline_crypt.c new file mode 100644 index 000000000..8bfb3ce86 --- /dev/null +++ b/fs/crypto/inline_crypt.c @@ -0,0 +1,479 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Inline encryption support for fscrypt + * + * Copyright 2019 Google LLC + */ + +/* + * With "inline encryption", the block layer handles the decryption/encryption + * as part of the bio, instead of the filesystem doing the crypto itself via + * crypto API. See Documentation/block/inline-encryption.rst. fscrypt still + * provides the key and IV to use. + */ + +#include +#include +#include +#include +#include +#include + +#include "fscrypt_private.h" + +static struct block_device **fscrypt_get_devices(struct super_block *sb, + unsigned int *num_devs) +{ + struct block_device **devs; + + if (sb->s_cop->get_devices) { + devs = sb->s_cop->get_devices(sb, num_devs); + if (devs) + return devs; + } + devs = kmalloc(sizeof(*devs), GFP_KERNEL); + if (!devs) + return ERR_PTR(-ENOMEM); + devs[0] = sb->s_bdev; + *num_devs = 1; + return devs; +} + +static unsigned int fscrypt_get_dun_bytes(const struct fscrypt_info *ci) +{ + struct super_block *sb = ci->ci_inode->i_sb; + unsigned int flags = fscrypt_policy_flags(&ci->ci_policy); + int ino_bits = 64, lblk_bits = 64; + + if (flags & FSCRYPT_POLICY_FLAG_DIRECT_KEY) + return offsetofend(union fscrypt_iv, nonce); + + if (flags & FSCRYPT_POLICY_FLAG_IV_INO_LBLK_64) + return sizeof(__le64); + + if (flags & FSCRYPT_POLICY_FLAG_IV_INO_LBLK_32) + return sizeof(__le32); + + /* Default case: IVs are just the file logical block number */ + if (sb->s_cop->get_ino_and_lblk_bits) + sb->s_cop->get_ino_and_lblk_bits(sb, &ino_bits, &lblk_bits); + return DIV_ROUND_UP(lblk_bits, 8); +} + +/* + * Log a message when starting to use blk-crypto (native) or blk-crypto-fallback + * for an encryption mode for the first time. This is the blk-crypto + * counterpart to the message logged when starting to use the crypto API for the + * first time. A limitation is that these messages don't convey which specific + * filesystems or files are using each implementation. However, *usually* + * systems use just one implementation per mode, which makes these messages + * helpful for debugging problems where the "wrong" implementation is used. + */ +static void fscrypt_log_blk_crypto_impl(struct fscrypt_mode *mode, + struct block_device **devs, + unsigned int num_devs, + const struct blk_crypto_config *cfg) +{ + unsigned int i; + + for (i = 0; i < num_devs; i++) { + if (!IS_ENABLED(CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK) || + blk_crypto_config_supported_natively(devs[i], cfg)) { + if (!xchg(&mode->logged_blk_crypto_native, 1)) + pr_info("fscrypt: %s using blk-crypto (native)\n", + mode->friendly_name); + } else if (!xchg(&mode->logged_blk_crypto_fallback, 1)) { + pr_info("fscrypt: %s using blk-crypto-fallback\n", + mode->friendly_name); + } + } +} + +/* Enable inline encryption for this file if supported. */ +int fscrypt_select_encryption_impl(struct fscrypt_info *ci) +{ + const struct inode *inode = ci->ci_inode; + struct super_block *sb = inode->i_sb; + struct blk_crypto_config crypto_cfg; + struct block_device **devs; + unsigned int num_devs; + unsigned int i; + + /* The file must need contents encryption, not filenames encryption */ + if (!S_ISREG(inode->i_mode)) + return 0; + + /* The crypto mode must have a blk-crypto counterpart */ + if (ci->ci_mode->blk_crypto_mode == BLK_ENCRYPTION_MODE_INVALID) + return 0; + + /* The filesystem must be mounted with -o inlinecrypt */ + if (!(sb->s_flags & SB_INLINECRYPT)) + return 0; + + /* + * When a page contains multiple logically contiguous filesystem blocks, + * some filesystem code only calls fscrypt_mergeable_bio() for the first + * block in the page. This is fine for most of fscrypt's IV generation + * strategies, where contiguous blocks imply contiguous IVs. But it + * doesn't work with IV_INO_LBLK_32. For now, simply exclude + * IV_INO_LBLK_32 with blocksize != PAGE_SIZE from inline encryption. + */ + if ((fscrypt_policy_flags(&ci->ci_policy) & + FSCRYPT_POLICY_FLAG_IV_INO_LBLK_32) && + sb->s_blocksize != PAGE_SIZE) + return 0; + + /* + * On all the filesystem's block devices, blk-crypto must support the + * crypto configuration that the file would use. + */ + crypto_cfg.crypto_mode = ci->ci_mode->blk_crypto_mode; + crypto_cfg.data_unit_size = sb->s_blocksize; + crypto_cfg.dun_bytes = fscrypt_get_dun_bytes(ci); + + devs = fscrypt_get_devices(sb, &num_devs); + if (IS_ERR(devs)) + return PTR_ERR(devs); + + for (i = 0; i < num_devs; i++) { + if (!blk_crypto_config_supported(devs[i], &crypto_cfg)) + goto out_free_devs; + } + + fscrypt_log_blk_crypto_impl(ci->ci_mode, devs, num_devs, &crypto_cfg); + + ci->ci_inlinecrypt = true; +out_free_devs: + kfree(devs); + + return 0; +} + +int fscrypt_prepare_inline_crypt_key(struct fscrypt_prepared_key *prep_key, + const u8 *raw_key, + const struct fscrypt_info *ci) +{ + const struct inode *inode = ci->ci_inode; + struct super_block *sb = inode->i_sb; + enum blk_crypto_mode_num crypto_mode = ci->ci_mode->blk_crypto_mode; + struct blk_crypto_key *blk_key; + struct block_device **devs; + unsigned int num_devs; + unsigned int i; + int err; + + blk_key = kmalloc(sizeof(*blk_key), GFP_KERNEL); + if (!blk_key) + return -ENOMEM; + + err = blk_crypto_init_key(blk_key, raw_key, crypto_mode, + fscrypt_get_dun_bytes(ci), sb->s_blocksize); + if (err) { + fscrypt_err(inode, "error %d initializing blk-crypto key", err); + goto fail; + } + + /* Start using blk-crypto on all the filesystem's block devices. */ + devs = fscrypt_get_devices(sb, &num_devs); + if (IS_ERR(devs)) { + err = PTR_ERR(devs); + goto fail; + } + for (i = 0; i < num_devs; i++) { + err = blk_crypto_start_using_key(devs[i], blk_key); + if (err) + break; + } + kfree(devs); + if (err) { + fscrypt_err(inode, "error %d starting to use blk-crypto", err); + goto fail; + } + + /* + * Pairs with the smp_load_acquire() in fscrypt_is_key_prepared(). + * I.e., here we publish ->blk_key with a RELEASE barrier so that + * concurrent tasks can ACQUIRE it. Note that this concurrency is only + * possible for per-mode keys, not for per-file keys. + */ + smp_store_release(&prep_key->blk_key, blk_key); + return 0; + +fail: + kfree_sensitive(blk_key); + return err; +} + +void fscrypt_destroy_inline_crypt_key(struct super_block *sb, + struct fscrypt_prepared_key *prep_key) +{ + struct blk_crypto_key *blk_key = prep_key->blk_key; + struct block_device **devs; + unsigned int num_devs; + unsigned int i; + + if (!blk_key) + return; + + /* Evict the key from all the filesystem's block devices. */ + devs = fscrypt_get_devices(sb, &num_devs); + if (!IS_ERR(devs)) { + for (i = 0; i < num_devs; i++) + blk_crypto_evict_key(devs[i], blk_key); + kfree(devs); + } + kfree_sensitive(blk_key); +} + +bool __fscrypt_inode_uses_inline_crypto(const struct inode *inode) +{ + return inode->i_crypt_info->ci_inlinecrypt; +} +EXPORT_SYMBOL_GPL(__fscrypt_inode_uses_inline_crypto); + +static void fscrypt_generate_dun(const struct fscrypt_info *ci, u64 lblk_num, + u64 dun[BLK_CRYPTO_DUN_ARRAY_SIZE]) +{ + union fscrypt_iv iv; + int i; + + fscrypt_generate_iv(&iv, lblk_num, ci); + + BUILD_BUG_ON(FSCRYPT_MAX_IV_SIZE > BLK_CRYPTO_MAX_IV_SIZE); + memset(dun, 0, BLK_CRYPTO_MAX_IV_SIZE); + for (i = 0; i < ci->ci_mode->ivsize/sizeof(dun[0]); i++) + dun[i] = le64_to_cpu(iv.dun[i]); +} + +/** + * fscrypt_set_bio_crypt_ctx() - prepare a file contents bio for inline crypto + * @bio: a bio which will eventually be submitted to the file + * @inode: the file's inode + * @first_lblk: the first file logical block number in the I/O + * @gfp_mask: memory allocation flags - these must be a waiting mask so that + * bio_crypt_set_ctx can't fail. + * + * If the contents of the file should be encrypted (or decrypted) with inline + * encryption, then assign the appropriate encryption context to the bio. + * + * Normally the bio should be newly allocated (i.e. no pages added yet), as + * otherwise fscrypt_mergeable_bio() won't work as intended. + * + * The encryption context will be freed automatically when the bio is freed. + */ +void fscrypt_set_bio_crypt_ctx(struct bio *bio, const struct inode *inode, + u64 first_lblk, gfp_t gfp_mask) +{ + const struct fscrypt_info *ci; + u64 dun[BLK_CRYPTO_DUN_ARRAY_SIZE]; + + if (!fscrypt_inode_uses_inline_crypto(inode)) + return; + ci = inode->i_crypt_info; + + fscrypt_generate_dun(ci, first_lblk, dun); + bio_crypt_set_ctx(bio, ci->ci_enc_key.blk_key, dun, gfp_mask); +} +EXPORT_SYMBOL_GPL(fscrypt_set_bio_crypt_ctx); + +/* Extract the inode and logical block number from a buffer_head. */ +static bool bh_get_inode_and_lblk_num(const struct buffer_head *bh, + const struct inode **inode_ret, + u64 *lblk_num_ret) +{ + struct page *page = bh->b_page; + const struct address_space *mapping; + const struct inode *inode; + + /* + * The ext4 journal (jbd2) can submit a buffer_head it directly created + * for a non-pagecache page. fscrypt doesn't care about these. + */ + mapping = page_mapping(page); + if (!mapping) + return false; + inode = mapping->host; + + *inode_ret = inode; + *lblk_num_ret = ((u64)page->index << (PAGE_SHIFT - inode->i_blkbits)) + + (bh_offset(bh) >> inode->i_blkbits); + return true; +} + +/** + * fscrypt_set_bio_crypt_ctx_bh() - prepare a file contents bio for inline + * crypto + * @bio: a bio which will eventually be submitted to the file + * @first_bh: the first buffer_head for which I/O will be submitted + * @gfp_mask: memory allocation flags + * + * Same as fscrypt_set_bio_crypt_ctx(), except this takes a buffer_head instead + * of an inode and block number directly. + */ +void fscrypt_set_bio_crypt_ctx_bh(struct bio *bio, + const struct buffer_head *first_bh, + gfp_t gfp_mask) +{ + const struct inode *inode; + u64 first_lblk; + + if (bh_get_inode_and_lblk_num(first_bh, &inode, &first_lblk)) + fscrypt_set_bio_crypt_ctx(bio, inode, first_lblk, gfp_mask); +} +EXPORT_SYMBOL_GPL(fscrypt_set_bio_crypt_ctx_bh); + +/** + * fscrypt_mergeable_bio() - test whether data can be added to a bio + * @bio: the bio being built up + * @inode: the inode for the next part of the I/O + * @next_lblk: the next file logical block number in the I/O + * + * When building a bio which may contain data which should undergo inline + * encryption (or decryption) via fscrypt, filesystems should call this function + * to ensure that the resulting bio contains only contiguous data unit numbers. + * This will return false if the next part of the I/O cannot be merged with the + * bio because either the encryption key would be different or the encryption + * data unit numbers would be discontiguous. + * + * fscrypt_set_bio_crypt_ctx() must have already been called on the bio. + * + * This function isn't required in cases where crypto-mergeability is ensured in + * another way, such as I/O targeting only a single file (and thus a single key) + * combined with fscrypt_limit_io_blocks() to ensure DUN contiguity. + * + * Return: true iff the I/O is mergeable + */ +bool fscrypt_mergeable_bio(struct bio *bio, const struct inode *inode, + u64 next_lblk) +{ + const struct bio_crypt_ctx *bc = bio->bi_crypt_context; + u64 next_dun[BLK_CRYPTO_DUN_ARRAY_SIZE]; + + if (!!bc != fscrypt_inode_uses_inline_crypto(inode)) + return false; + if (!bc) + return true; + + /* + * Comparing the key pointers is good enough, as all I/O for each key + * uses the same pointer. I.e., there's currently no need to support + * merging requests where the keys are the same but the pointers differ. + */ + if (bc->bc_key != inode->i_crypt_info->ci_enc_key.blk_key) + return false; + + fscrypt_generate_dun(inode->i_crypt_info, next_lblk, next_dun); + return bio_crypt_dun_is_contiguous(bc, bio->bi_iter.bi_size, next_dun); +} +EXPORT_SYMBOL_GPL(fscrypt_mergeable_bio); + +/** + * fscrypt_mergeable_bio_bh() - test whether data can be added to a bio + * @bio: the bio being built up + * @next_bh: the next buffer_head for which I/O will be submitted + * + * Same as fscrypt_mergeable_bio(), except this takes a buffer_head instead of + * an inode and block number directly. + * + * Return: true iff the I/O is mergeable + */ +bool fscrypt_mergeable_bio_bh(struct bio *bio, + const struct buffer_head *next_bh) +{ + const struct inode *inode; + u64 next_lblk; + + if (!bh_get_inode_and_lblk_num(next_bh, &inode, &next_lblk)) + return !bio->bi_crypt_context; + + return fscrypt_mergeable_bio(bio, inode, next_lblk); +} +EXPORT_SYMBOL_GPL(fscrypt_mergeable_bio_bh); + +/** + * fscrypt_dio_supported() - check whether DIO (direct I/O) is supported on an + * inode, as far as encryption is concerned + * @inode: the inode in question + * + * Return: %true if there are no encryption constraints that prevent DIO from + * being supported; %false if DIO is unsupported. (Note that in the + * %true case, the filesystem might have other, non-encryption-related + * constraints that prevent DIO from actually being supported. Also, on + * encrypted files the filesystem is still responsible for only allowing + * DIO when requests are filesystem-block-aligned.) + */ +bool fscrypt_dio_supported(struct inode *inode) +{ + int err; + + /* If the file is unencrypted, no veto from us. */ + if (!fscrypt_needs_contents_encryption(inode)) + return true; + + /* + * We only support DIO with inline crypto, not fs-layer crypto. + * + * To determine whether the inode is using inline crypto, we have to set + * up the key if it wasn't already done. This is because in the current + * design of fscrypt, the decision of whether to use inline crypto or + * not isn't made until the inode's encryption key is being set up. In + * the DIO read/write case, the key will always be set up already, since + * the file will be open. But in the case of statx(), the key might not + * be set up yet, as the file might not have been opened yet. + */ + err = fscrypt_require_key(inode); + if (err) { + /* + * Key unavailable or couldn't be set up. This edge case isn't + * worth worrying about; just report that DIO is unsupported. + */ + return false; + } + return fscrypt_inode_uses_inline_crypto(inode); +} +EXPORT_SYMBOL_GPL(fscrypt_dio_supported); + +/** + * fscrypt_limit_io_blocks() - limit I/O blocks to avoid discontiguous DUNs + * @inode: the file on which I/O is being done + * @lblk: the block at which the I/O is being started from + * @nr_blocks: the number of blocks we want to submit starting at @lblk + * + * Determine the limit to the number of blocks that can be submitted in a bio + * targeting @lblk without causing a data unit number (DUN) discontiguity. + * + * This is normally just @nr_blocks, as normally the DUNs just increment along + * with the logical blocks. (Or the file is not encrypted.) + * + * In rare cases, fscrypt can be using an IV generation method that allows the + * DUN to wrap around within logically contiguous blocks, and that wraparound + * will occur. If this happens, a value less than @nr_blocks will be returned + * so that the wraparound doesn't occur in the middle of a bio, which would + * cause encryption/decryption to produce wrong results. + * + * Return: the actual number of blocks that can be submitted + */ +u64 fscrypt_limit_io_blocks(const struct inode *inode, u64 lblk, u64 nr_blocks) +{ + const struct fscrypt_info *ci; + u32 dun; + + if (!fscrypt_inode_uses_inline_crypto(inode)) + return nr_blocks; + + if (nr_blocks <= 1) + return nr_blocks; + + ci = inode->i_crypt_info; + if (!(fscrypt_policy_flags(&ci->ci_policy) & + FSCRYPT_POLICY_FLAG_IV_INO_LBLK_32)) + return nr_blocks; + + /* With IV_INO_LBLK_32, the DUN can wrap around from U32_MAX to 0. */ + + dun = ci->ci_hashed_ino + lblk; + + return min_t(u64, nr_blocks, (u64)U32_MAX + 1 - dun); +} +EXPORT_SYMBOL_GPL(fscrypt_limit_io_blocks); -- cgit v1.2.3