From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- fs/jffs2/background.c | 165 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 165 insertions(+) create mode 100644 fs/jffs2/background.c (limited to 'fs/jffs2/background.c') diff --git a/fs/jffs2/background.c b/fs/jffs2/background.c new file mode 100644 index 000000000..6da92ecaf --- /dev/null +++ b/fs/jffs2/background.c @@ -0,0 +1,165 @@ +/* + * JFFS2 -- Journalling Flash File System, Version 2. + * + * Copyright © 2001-2007 Red Hat, Inc. + * Copyright © 2004-2010 David Woodhouse + * + * Created by David Woodhouse + * + * For licensing information, see the file 'LICENCE' in this directory. + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include "nodelist.h" + + +static int jffs2_garbage_collect_thread(void *); + +void jffs2_garbage_collect_trigger(struct jffs2_sb_info *c) +{ + assert_spin_locked(&c->erase_completion_lock); + if (c->gc_task && jffs2_thread_should_wake(c)) + send_sig(SIGHUP, c->gc_task, 1); +} + +/* This must only ever be called when no GC thread is currently running */ +int jffs2_start_garbage_collect_thread(struct jffs2_sb_info *c) +{ + struct task_struct *tsk; + int ret = 0; + + BUG_ON(c->gc_task); + + init_completion(&c->gc_thread_start); + init_completion(&c->gc_thread_exit); + + tsk = kthread_run(jffs2_garbage_collect_thread, c, "jffs2_gcd_mtd%d", c->mtd->index); + if (IS_ERR(tsk)) { + pr_warn("fork failed for JFFS2 garbage collect thread: %ld\n", + -PTR_ERR(tsk)); + complete(&c->gc_thread_exit); + ret = PTR_ERR(tsk); + } else { + /* Wait for it... */ + jffs2_dbg(1, "Garbage collect thread is pid %d\n", tsk->pid); + wait_for_completion(&c->gc_thread_start); + ret = tsk->pid; + } + + return ret; +} + +void jffs2_stop_garbage_collect_thread(struct jffs2_sb_info *c) +{ + int wait = 0; + spin_lock(&c->erase_completion_lock); + if (c->gc_task) { + jffs2_dbg(1, "Killing GC task %d\n", c->gc_task->pid); + send_sig(SIGKILL, c->gc_task, 1); + wait = 1; + } + spin_unlock(&c->erase_completion_lock); + if (wait) + wait_for_completion(&c->gc_thread_exit); +} + +static int jffs2_garbage_collect_thread(void *_c) +{ + struct jffs2_sb_info *c = _c; + sigset_t hupmask; + + siginitset(&hupmask, sigmask(SIGHUP)); + allow_signal(SIGKILL); + allow_signal(SIGSTOP); + allow_signal(SIGHUP); + + c->gc_task = current; + complete(&c->gc_thread_start); + + set_user_nice(current, 10); + + set_freezable(); + for (;;) { + sigprocmask(SIG_UNBLOCK, &hupmask, NULL); + again: + spin_lock(&c->erase_completion_lock); + if (!jffs2_thread_should_wake(c)) { + set_current_state (TASK_INTERRUPTIBLE); + spin_unlock(&c->erase_completion_lock); + jffs2_dbg(1, "%s(): sleeping...\n", __func__); + schedule(); + } else { + spin_unlock(&c->erase_completion_lock); + } + /* Problem - immediately after bootup, the GCD spends a lot + * of time in places like jffs2_kill_fragtree(); so much so + * that userspace processes (like gdm and X) are starved + * despite plenty of cond_resched()s and renicing. Yield() + * doesn't help, either (presumably because userspace and GCD + * are generally competing for a higher latency resource - + * disk). + * This forces the GCD to slow the hell down. Pulling an + * inode in with read_inode() is much preferable to having + * the GC thread get there first. */ + schedule_timeout_interruptible(msecs_to_jiffies(50)); + + if (kthread_should_stop()) { + jffs2_dbg(1, "%s(): kthread_stop() called\n", __func__); + goto die; + } + + /* Put_super will send a SIGKILL and then wait on the sem. + */ + while (signal_pending(current) || freezing(current)) { + unsigned long signr; + + if (try_to_freeze()) + goto again; + + signr = kernel_dequeue_signal(); + + switch(signr) { + case SIGSTOP: + jffs2_dbg(1, "%s(): SIGSTOP received\n", + __func__); + kernel_signal_stop(); + break; + + case SIGKILL: + jffs2_dbg(1, "%s(): SIGKILL received\n", + __func__); + goto die; + + case SIGHUP: + jffs2_dbg(1, "%s(): SIGHUP received\n", + __func__); + break; + default: + jffs2_dbg(1, "%s(): signal %ld received\n", + __func__, signr); + } + } + /* We don't want SIGHUP to interrupt us. STOP and KILL are OK though. */ + sigprocmask(SIG_BLOCK, &hupmask, NULL); + + jffs2_dbg(1, "%s(): pass\n", __func__); + if (jffs2_garbage_collect_pass(c) == -ENOSPC) { + pr_notice("No space for garbage collection. Aborting GC thread\n"); + goto die; + } + } + die: + spin_lock(&c->erase_completion_lock); + c->gc_task = NULL; + spin_unlock(&c->erase_completion_lock); + kthread_complete_and_exit(&c->gc_thread_exit, 0); +} -- cgit v1.2.3