From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- fs/jffs2/compr.c | 418 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 418 insertions(+) create mode 100644 fs/jffs2/compr.c (limited to 'fs/jffs2/compr.c') diff --git a/fs/jffs2/compr.c b/fs/jffs2/compr.c new file mode 100644 index 000000000..4849a4c9a --- /dev/null +++ b/fs/jffs2/compr.c @@ -0,0 +1,418 @@ +/* + * JFFS2 -- Journalling Flash File System, Version 2. + * + * Copyright © 2001-2007 Red Hat, Inc. + * Copyright © 2004-2010 David Woodhouse + * Copyright © 2004 Ferenc Havasi , + * University of Szeged, Hungary + * + * Created by Arjan van de Ven + * + * For licensing information, see the file 'LICENCE' in this directory. + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "compr.h" + +static DEFINE_SPINLOCK(jffs2_compressor_list_lock); + +/* Available compressors are on this list */ +static LIST_HEAD(jffs2_compressor_list); + +/* Actual compression mode */ +static int jffs2_compression_mode = JFFS2_COMPR_MODE_PRIORITY; + +/* Statistics for blocks stored without compression */ +static uint32_t none_stat_compr_blocks=0,none_stat_decompr_blocks=0,none_stat_compr_size=0; + + +/* + * Return 1 to use this compression + */ +static int jffs2_is_best_compression(struct jffs2_compressor *this, + struct jffs2_compressor *best, uint32_t size, uint32_t bestsize) +{ + switch (jffs2_compression_mode) { + case JFFS2_COMPR_MODE_SIZE: + if (bestsize > size) + return 1; + return 0; + case JFFS2_COMPR_MODE_FAVOURLZO: + if ((this->compr == JFFS2_COMPR_LZO) && (bestsize > size)) + return 1; + if ((best->compr != JFFS2_COMPR_LZO) && (bestsize > size)) + return 1; + if ((this->compr == JFFS2_COMPR_LZO) && (bestsize > (size * FAVOUR_LZO_PERCENT / 100))) + return 1; + if ((bestsize * FAVOUR_LZO_PERCENT / 100) > size) + return 1; + + return 0; + } + /* Shouldn't happen */ + return 0; +} + +/* + * jffs2_selected_compress: + * @compr: Explicit compression type to use (ie, JFFS2_COMPR_ZLIB). + * If 0, just take the first available compression mode. + * @data_in: Pointer to uncompressed data + * @cpage_out: Pointer to returned pointer to buffer for compressed data + * @datalen: On entry, holds the amount of data available for compression. + * On exit, expected to hold the amount of data actually compressed. + * @cdatalen: On entry, holds the amount of space available for compressed + * data. On exit, expected to hold the actual size of the compressed + * data. + * + * Returns: the compression type used. Zero is used to show that the data + * could not be compressed; probably because we couldn't find the requested + * compression mode. + */ +static int jffs2_selected_compress(u8 compr, unsigned char *data_in, + unsigned char **cpage_out, u32 *datalen, u32 *cdatalen) +{ + struct jffs2_compressor *this; + int err, ret = JFFS2_COMPR_NONE; + uint32_t orig_slen, orig_dlen; + char *output_buf; + + output_buf = kmalloc(*cdatalen, GFP_KERNEL); + if (!output_buf) { + pr_warn("No memory for compressor allocation. Compression failed.\n"); + return ret; + } + orig_slen = *datalen; + orig_dlen = *cdatalen; + spin_lock(&jffs2_compressor_list_lock); + list_for_each_entry(this, &jffs2_compressor_list, list) { + /* Skip decompress-only and disabled modules */ + if (!this->compress || this->disabled) + continue; + + /* Skip if not the desired compression type */ + if (compr && (compr != this->compr)) + continue; + + /* + * Either compression type was unspecified, or we found our + * compressor; either way, we're good to go. + */ + this->usecount++; + spin_unlock(&jffs2_compressor_list_lock); + + *datalen = orig_slen; + *cdatalen = orig_dlen; + err = this->compress(data_in, output_buf, datalen, cdatalen); + + spin_lock(&jffs2_compressor_list_lock); + this->usecount--; + if (!err) { + /* Success */ + ret = this->compr; + this->stat_compr_blocks++; + this->stat_compr_orig_size += *datalen; + this->stat_compr_new_size += *cdatalen; + break; + } + } + spin_unlock(&jffs2_compressor_list_lock); + if (ret == JFFS2_COMPR_NONE) + kfree(output_buf); + else + *cpage_out = output_buf; + + return ret; +} + +/* jffs2_compress: + * @data_in: Pointer to uncompressed data + * @cpage_out: Pointer to returned pointer to buffer for compressed data + * @datalen: On entry, holds the amount of data available for compression. + * On exit, expected to hold the amount of data actually compressed. + * @cdatalen: On entry, holds the amount of space available for compressed + * data. On exit, expected to hold the actual size of the compressed + * data. + * + * Returns: Lower byte to be stored with data indicating compression type used. + * Zero is used to show that the data could not be compressed - the + * compressed version was actually larger than the original. + * Upper byte will be used later. (soon) + * + * If the cdata buffer isn't large enough to hold all the uncompressed data, + * jffs2_compress should compress as much as will fit, and should set + * *datalen accordingly to show the amount of data which were compressed. + */ +uint16_t jffs2_compress(struct jffs2_sb_info *c, struct jffs2_inode_info *f, + unsigned char *data_in, unsigned char **cpage_out, + uint32_t *datalen, uint32_t *cdatalen) +{ + int ret = JFFS2_COMPR_NONE; + int mode, compr_ret; + struct jffs2_compressor *this, *best=NULL; + unsigned char *output_buf = NULL, *tmp_buf; + uint32_t orig_slen, orig_dlen; + uint32_t best_slen=0, best_dlen=0; + + if (c->mount_opts.override_compr) + mode = c->mount_opts.compr; + else + mode = jffs2_compression_mode; + + switch (mode) { + case JFFS2_COMPR_MODE_NONE: + break; + case JFFS2_COMPR_MODE_PRIORITY: + ret = jffs2_selected_compress(0, data_in, cpage_out, datalen, + cdatalen); + break; + case JFFS2_COMPR_MODE_SIZE: + case JFFS2_COMPR_MODE_FAVOURLZO: + orig_slen = *datalen; + orig_dlen = *cdatalen; + spin_lock(&jffs2_compressor_list_lock); + list_for_each_entry(this, &jffs2_compressor_list, list) { + /* Skip decompress-only backwards-compatibility and disabled modules */ + if ((!this->compress)||(this->disabled)) + continue; + /* Allocating memory for output buffer if necessary */ + if ((this->compr_buf_size < orig_slen) && (this->compr_buf)) { + spin_unlock(&jffs2_compressor_list_lock); + kfree(this->compr_buf); + spin_lock(&jffs2_compressor_list_lock); + this->compr_buf_size=0; + this->compr_buf=NULL; + } + if (!this->compr_buf) { + spin_unlock(&jffs2_compressor_list_lock); + tmp_buf = kmalloc(orig_slen, GFP_KERNEL); + spin_lock(&jffs2_compressor_list_lock); + if (!tmp_buf) { + pr_warn("No memory for compressor allocation. (%d bytes)\n", + orig_slen); + continue; + } + else { + this->compr_buf = tmp_buf; + this->compr_buf_size = orig_slen; + } + } + this->usecount++; + spin_unlock(&jffs2_compressor_list_lock); + *datalen = orig_slen; + *cdatalen = orig_dlen; + compr_ret = this->compress(data_in, this->compr_buf, datalen, cdatalen); + spin_lock(&jffs2_compressor_list_lock); + this->usecount--; + if (!compr_ret) { + if (((!best_dlen) || jffs2_is_best_compression(this, best, *cdatalen, best_dlen)) + && (*cdatalen < *datalen)) { + best_dlen = *cdatalen; + best_slen = *datalen; + best = this; + } + } + } + if (best_dlen) { + *cdatalen = best_dlen; + *datalen = best_slen; + output_buf = best->compr_buf; + best->compr_buf = NULL; + best->compr_buf_size = 0; + best->stat_compr_blocks++; + best->stat_compr_orig_size += best_slen; + best->stat_compr_new_size += best_dlen; + ret = best->compr; + *cpage_out = output_buf; + } + spin_unlock(&jffs2_compressor_list_lock); + break; + case JFFS2_COMPR_MODE_FORCELZO: + ret = jffs2_selected_compress(JFFS2_COMPR_LZO, data_in, + cpage_out, datalen, cdatalen); + break; + case JFFS2_COMPR_MODE_FORCEZLIB: + ret = jffs2_selected_compress(JFFS2_COMPR_ZLIB, data_in, + cpage_out, datalen, cdatalen); + break; + default: + pr_err("unknown compression mode\n"); + } + + if (ret == JFFS2_COMPR_NONE) { + *cpage_out = data_in; + *datalen = *cdatalen; + none_stat_compr_blocks++; + none_stat_compr_size += *datalen; + } + return ret; +} + +int jffs2_decompress(struct jffs2_sb_info *c, struct jffs2_inode_info *f, + uint16_t comprtype, unsigned char *cdata_in, + unsigned char *data_out, uint32_t cdatalen, uint32_t datalen) +{ + struct jffs2_compressor *this; + int ret; + + /* Older code had a bug where it would write non-zero 'usercompr' + fields. Deal with it. */ + if ((comprtype & 0xff) <= JFFS2_COMPR_ZLIB) + comprtype &= 0xff; + + switch (comprtype & 0xff) { + case JFFS2_COMPR_NONE: + /* This should be special-cased elsewhere, but we might as well deal with it */ + memcpy(data_out, cdata_in, datalen); + none_stat_decompr_blocks++; + break; + case JFFS2_COMPR_ZERO: + memset(data_out, 0, datalen); + break; + default: + spin_lock(&jffs2_compressor_list_lock); + list_for_each_entry(this, &jffs2_compressor_list, list) { + if (comprtype == this->compr) { + this->usecount++; + spin_unlock(&jffs2_compressor_list_lock); + ret = this->decompress(cdata_in, data_out, cdatalen, datalen); + spin_lock(&jffs2_compressor_list_lock); + if (ret) { + pr_warn("Decompressor \"%s\" returned %d\n", + this->name, ret); + } + else { + this->stat_decompr_blocks++; + } + this->usecount--; + spin_unlock(&jffs2_compressor_list_lock); + return ret; + } + } + pr_warn("compression type 0x%02x not available\n", comprtype); + spin_unlock(&jffs2_compressor_list_lock); + return -EIO; + } + return 0; +} + +int jffs2_register_compressor(struct jffs2_compressor *comp) +{ + struct jffs2_compressor *this; + + if (!comp->name) { + pr_warn("NULL compressor name at registering JFFS2 compressor. Failed.\n"); + return -1; + } + comp->compr_buf_size=0; + comp->compr_buf=NULL; + comp->usecount=0; + comp->stat_compr_orig_size=0; + comp->stat_compr_new_size=0; + comp->stat_compr_blocks=0; + comp->stat_decompr_blocks=0; + jffs2_dbg(1, "Registering JFFS2 compressor \"%s\"\n", comp->name); + + spin_lock(&jffs2_compressor_list_lock); + + list_for_each_entry(this, &jffs2_compressor_list, list) { + if (this->priority < comp->priority) { + list_add(&comp->list, this->list.prev); + goto out; + } + } + list_add_tail(&comp->list, &jffs2_compressor_list); +out: + D2(list_for_each_entry(this, &jffs2_compressor_list, list) { + printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority); + }) + + spin_unlock(&jffs2_compressor_list_lock); + + return 0; +} + +int jffs2_unregister_compressor(struct jffs2_compressor *comp) +{ + D2(struct jffs2_compressor *this); + + jffs2_dbg(1, "Unregistering JFFS2 compressor \"%s\"\n", comp->name); + + spin_lock(&jffs2_compressor_list_lock); + + if (comp->usecount) { + spin_unlock(&jffs2_compressor_list_lock); + pr_warn("Compressor module is in use. Unregister failed.\n"); + return -1; + } + list_del(&comp->list); + + D2(list_for_each_entry(this, &jffs2_compressor_list, list) { + printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority); + }) + spin_unlock(&jffs2_compressor_list_lock); + return 0; +} + +void jffs2_free_comprbuf(unsigned char *comprbuf, unsigned char *orig) +{ + if (orig != comprbuf) + kfree(comprbuf); +} + +int __init jffs2_compressors_init(void) +{ +/* Registering compressors */ +#ifdef CONFIG_JFFS2_ZLIB + jffs2_zlib_init(); +#endif +#ifdef CONFIG_JFFS2_RTIME + jffs2_rtime_init(); +#endif +#ifdef CONFIG_JFFS2_RUBIN + jffs2_rubinmips_init(); + jffs2_dynrubin_init(); +#endif +#ifdef CONFIG_JFFS2_LZO + jffs2_lzo_init(); +#endif +/* Setting default compression mode */ +#ifdef CONFIG_JFFS2_CMODE_NONE + jffs2_compression_mode = JFFS2_COMPR_MODE_NONE; + jffs2_dbg(1, "default compression mode: none\n"); +#else +#ifdef CONFIG_JFFS2_CMODE_SIZE + jffs2_compression_mode = JFFS2_COMPR_MODE_SIZE; + jffs2_dbg(1, "default compression mode: size\n"); +#else +#ifdef CONFIG_JFFS2_CMODE_FAVOURLZO + jffs2_compression_mode = JFFS2_COMPR_MODE_FAVOURLZO; + jffs2_dbg(1, "default compression mode: favourlzo\n"); +#else + jffs2_dbg(1, "default compression mode: priority\n"); +#endif +#endif +#endif + return 0; +} + +int jffs2_compressors_exit(void) +{ +/* Unregistering compressors */ +#ifdef CONFIG_JFFS2_LZO + jffs2_lzo_exit(); +#endif +#ifdef CONFIG_JFFS2_RUBIN + jffs2_dynrubin_exit(); + jffs2_rubinmips_exit(); +#endif +#ifdef CONFIG_JFFS2_RTIME + jffs2_rtime_exit(); +#endif +#ifdef CONFIG_JFFS2_ZLIB + jffs2_zlib_exit(); +#endif + return 0; +} -- cgit v1.2.3