From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- include/drm/drm_encoder.h | 332 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 332 insertions(+) create mode 100644 include/drm/drm_encoder.h (limited to 'include/drm/drm_encoder.h') diff --git a/include/drm/drm_encoder.h b/include/drm/drm_encoder.h new file mode 100644 index 000000000..3a09682af --- /dev/null +++ b/include/drm/drm_encoder.h @@ -0,0 +1,332 @@ +/* + * Copyright (c) 2016 Intel Corporation + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef __DRM_ENCODER_H__ +#define __DRM_ENCODER_H__ + +#include +#include +#include +#include +#include +#include + +struct drm_encoder; + +/** + * struct drm_encoder_funcs - encoder controls + * + * Encoders sit between CRTCs and connectors. + */ +struct drm_encoder_funcs { + /** + * @reset: + * + * Reset encoder hardware and software state to off. This function isn't + * called by the core directly, only through drm_mode_config_reset(). + * It's not a helper hook only for historical reasons. + */ + void (*reset)(struct drm_encoder *encoder); + + /** + * @destroy: + * + * Clean up encoder resources. This is only called at driver unload time + * through drm_mode_config_cleanup() since an encoder cannot be + * hotplugged in DRM. + */ + void (*destroy)(struct drm_encoder *encoder); + + /** + * @late_register: + * + * This optional hook can be used to register additional userspace + * interfaces attached to the encoder like debugfs interfaces. + * It is called late in the driver load sequence from drm_dev_register(). + * Everything added from this callback should be unregistered in + * the early_unregister callback. + * + * Returns: + * + * 0 on success, or a negative error code on failure. + */ + int (*late_register)(struct drm_encoder *encoder); + + /** + * @early_unregister: + * + * This optional hook should be used to unregister the additional + * userspace interfaces attached to the encoder from + * @late_register. It is called from drm_dev_unregister(), + * early in the driver unload sequence to disable userspace access + * before data structures are torndown. + */ + void (*early_unregister)(struct drm_encoder *encoder); +}; + +/** + * struct drm_encoder - central DRM encoder structure + * @dev: parent DRM device + * @head: list management + * @base: base KMS object + * @name: human readable name, can be overwritten by the driver + * @funcs: control functions, can be NULL for simple managed encoders + * @helper_private: mid-layer private data + * + * CRTCs drive pixels to encoders, which convert them into signals + * appropriate for a given connector or set of connectors. + */ +struct drm_encoder { + struct drm_device *dev; + struct list_head head; + + struct drm_mode_object base; + char *name; + /** + * @encoder_type: + * + * One of the DRM_MODE_ENCODER_ types in drm_mode.h. The following + * encoder types are defined thus far: + * + * - DRM_MODE_ENCODER_DAC for VGA and analog on DVI-I/DVI-A. + * + * - DRM_MODE_ENCODER_TMDS for DVI, HDMI and (embedded) DisplayPort. + * + * - DRM_MODE_ENCODER_LVDS for display panels, or in general any panel + * with a proprietary parallel connector. + * + * - DRM_MODE_ENCODER_TVDAC for TV output (Composite, S-Video, + * Component, SCART). + * + * - DRM_MODE_ENCODER_VIRTUAL for virtual machine displays + * + * - DRM_MODE_ENCODER_DSI for panels connected using the DSI serial bus. + * + * - DRM_MODE_ENCODER_DPI for panels connected using the DPI parallel + * bus. + * + * - DRM_MODE_ENCODER_DPMST for special fake encoders used to allow + * mutliple DP MST streams to share one physical encoder. + */ + int encoder_type; + + /** + * @index: Position inside the mode_config.list, can be used as an array + * index. It is invariant over the lifetime of the encoder. + */ + unsigned index; + + /** + * @possible_crtcs: Bitmask of potential CRTC bindings, using + * drm_crtc_index() as the index into the bitfield. The driver must set + * the bits for all &drm_crtc objects this encoder can be connected to + * before calling drm_dev_register(). + * + * You will get a WARN if you get this wrong in the driver. + * + * Note that since CRTC objects can't be hotplugged the assigned indices + * are stable and hence known before registering all objects. + */ + uint32_t possible_crtcs; + + /** + * @possible_clones: Bitmask of potential sibling encoders for cloning, + * using drm_encoder_index() as the index into the bitfield. The driver + * must set the bits for all &drm_encoder objects which can clone a + * &drm_crtc together with this encoder before calling + * drm_dev_register(). Drivers should set the bit representing the + * encoder itself, too. Cloning bits should be set such that when two + * encoders can be used in a cloned configuration, they both should have + * each another bits set. + * + * As an exception to the above rule if the driver doesn't implement + * any cloning it can leave @possible_clones set to 0. The core will + * automagically fix this up by setting the bit for the encoder itself. + * + * You will get a WARN if you get this wrong in the driver. + * + * Note that since encoder objects can't be hotplugged the assigned indices + * are stable and hence known before registering all objects. + */ + uint32_t possible_clones; + + /** + * @crtc: Currently bound CRTC, only really meaningful for non-atomic + * drivers. Atomic drivers should instead check + * &drm_connector_state.crtc. + */ + struct drm_crtc *crtc; + + /** + * @bridge_chain: Bridges attached to this encoder. Drivers shall not + * access this field directly. + */ + struct list_head bridge_chain; + + const struct drm_encoder_funcs *funcs; + const struct drm_encoder_helper_funcs *helper_private; +}; + +#define obj_to_encoder(x) container_of(x, struct drm_encoder, base) + +__printf(5, 6) +int drm_encoder_init(struct drm_device *dev, + struct drm_encoder *encoder, + const struct drm_encoder_funcs *funcs, + int encoder_type, const char *name, ...); + +__printf(5, 6) +int drmm_encoder_init(struct drm_device *dev, + struct drm_encoder *encoder, + const struct drm_encoder_funcs *funcs, + int encoder_type, const char *name, ...); + +__printf(6, 7) +void *__drmm_encoder_alloc(struct drm_device *dev, + size_t size, size_t offset, + const struct drm_encoder_funcs *funcs, + int encoder_type, + const char *name, ...); + +/** + * drmm_encoder_alloc - Allocate and initialize an encoder + * @dev: drm device + * @type: the type of the struct which contains struct &drm_encoder + * @member: the name of the &drm_encoder within @type + * @funcs: callbacks for this encoder (optional) + * @encoder_type: user visible type of the encoder + * @name: printf style format string for the encoder name, or NULL for default name + * + * Allocates and initializes an encoder. Encoder should be subclassed as part of + * driver encoder objects. Cleanup is automatically handled through registering + * drm_encoder_cleanup() with drmm_add_action(). + * + * The @drm_encoder_funcs.destroy hook must be NULL. + * + * Returns: + * Pointer to new encoder, or ERR_PTR on failure. + */ +#define drmm_encoder_alloc(dev, type, member, funcs, encoder_type, name, ...) \ + ((type *)__drmm_encoder_alloc(dev, sizeof(type), \ + offsetof(type, member), funcs, \ + encoder_type, name, ##__VA_ARGS__)) + +/** + * drmm_plain_encoder_alloc - Allocate and initialize an encoder + * @dev: drm device + * @funcs: callbacks for this encoder (optional) + * @encoder_type: user visible type of the encoder + * @name: printf style format string for the encoder name, or NULL for default name + * + * This is a simplified version of drmm_encoder_alloc(), which only allocates + * and returns a struct drm_encoder instance, with no subclassing. + * + * Returns: + * Pointer to the new drm_encoder struct, or ERR_PTR on failure. + */ +#define drmm_plain_encoder_alloc(dev, funcs, encoder_type, name, ...) \ + ((struct drm_encoder *) \ + __drmm_encoder_alloc(dev, sizeof(struct drm_encoder), \ + 0, funcs, encoder_type, name, ##__VA_ARGS__)) + +/** + * drm_encoder_index - find the index of a registered encoder + * @encoder: encoder to find index for + * + * Given a registered encoder, return the index of that encoder within a DRM + * device's list of encoders. + */ +static inline unsigned int drm_encoder_index(const struct drm_encoder *encoder) +{ + return encoder->index; +} + +/** + * drm_encoder_mask - find the mask of a registered encoder + * @encoder: encoder to find mask for + * + * Given a registered encoder, return the mask bit of that encoder for an + * encoder's possible_clones field. + */ +static inline u32 drm_encoder_mask(const struct drm_encoder *encoder) +{ + return 1 << drm_encoder_index(encoder); +} + +/** + * drm_encoder_crtc_ok - can a given crtc drive a given encoder? + * @encoder: encoder to test + * @crtc: crtc to test + * + * Returns false if @encoder can't be driven by @crtc, true otherwise. + */ +static inline bool drm_encoder_crtc_ok(struct drm_encoder *encoder, + struct drm_crtc *crtc) +{ + return !!(encoder->possible_crtcs & drm_crtc_mask(crtc)); +} + +/** + * drm_encoder_find - find a &drm_encoder + * @dev: DRM device + * @file_priv: drm file to check for lease against. + * @id: encoder id + * + * Returns the encoder with @id, NULL if it doesn't exist. Simple wrapper around + * drm_mode_object_find(). + */ +static inline struct drm_encoder *drm_encoder_find(struct drm_device *dev, + struct drm_file *file_priv, + uint32_t id) +{ + struct drm_mode_object *mo; + + mo = drm_mode_object_find(dev, file_priv, id, DRM_MODE_OBJECT_ENCODER); + + return mo ? obj_to_encoder(mo) : NULL; +} + +void drm_encoder_cleanup(struct drm_encoder *encoder); + +/** + * drm_for_each_encoder_mask - iterate over encoders specified by bitmask + * @encoder: the loop cursor + * @dev: the DRM device + * @encoder_mask: bitmask of encoder indices + * + * Iterate over all encoders specified by bitmask. + */ +#define drm_for_each_encoder_mask(encoder, dev, encoder_mask) \ + list_for_each_entry((encoder), &(dev)->mode_config.encoder_list, head) \ + for_each_if ((encoder_mask) & drm_encoder_mask(encoder)) + +/** + * drm_for_each_encoder - iterate over all encoders + * @encoder: the loop cursor + * @dev: the DRM device + * + * Iterate over all encoders of @dev. + */ +#define drm_for_each_encoder(encoder, dev) \ + list_for_each_entry(encoder, &(dev)->mode_config.encoder_list, head) + +#endif -- cgit v1.2.3