From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- include/drm/drm_ioctl.h | 185 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 185 insertions(+) create mode 100644 include/drm/drm_ioctl.h (limited to 'include/drm/drm_ioctl.h') diff --git a/include/drm/drm_ioctl.h b/include/drm/drm_ioctl.h new file mode 100644 index 000000000..6ed61c371 --- /dev/null +++ b/include/drm/drm_ioctl.h @@ -0,0 +1,185 @@ +/* + * Internal Header for the Direct Rendering Manager + * + * Copyright 1999 Precision Insight, Inc., Cedar Park, Texas. + * Copyright 2000 VA Linux Systems, Inc., Sunnyvale, California. + * Copyright (c) 2009-2010, Code Aurora Forum. + * All rights reserved. + * + * Author: Rickard E. (Rik) Faith + * Author: Gareth Hughes + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * VA LINUX SYSTEMS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef _DRM_IOCTL_H_ +#define _DRM_IOCTL_H_ + +#include +#include + +#include + +struct drm_device; +struct drm_file; +struct file; + +/** + * drm_ioctl_t - DRM ioctl function type. + * @dev: DRM device inode + * @data: private pointer of the ioctl call + * @file_priv: DRM file this ioctl was made on + * + * This is the DRM ioctl typedef. Note that drm_ioctl() has alrady copied @data + * into kernel-space, and will also copy it back, depending upon the read/write + * settings in the ioctl command code. + */ +typedef int drm_ioctl_t(struct drm_device *dev, void *data, + struct drm_file *file_priv); + +/** + * drm_ioctl_compat_t - compatibility DRM ioctl function type. + * @filp: file pointer + * @cmd: ioctl command code + * @arg: DRM file this ioctl was made on + * + * Just a typedef to make declaring an array of compatibility handlers easier. + * New drivers shouldn't screw up the structure layout for their ioctl + * structures and hence never need this. + */ +typedef int drm_ioctl_compat_t(struct file *filp, unsigned int cmd, + unsigned long arg); + +#define DRM_IOCTL_NR(n) _IOC_NR(n) +#define DRM_IOCTL_TYPE(n) _IOC_TYPE(n) +#define DRM_MAJOR 226 + +/** + * enum drm_ioctl_flags - DRM ioctl flags + * + * Various flags that can be set in &drm_ioctl_desc.flags to control how + * userspace can use a given ioctl. + */ +enum drm_ioctl_flags { + /** + * @DRM_AUTH: + * + * This is for ioctl which are used for rendering, and require that the + * file descriptor is either for a render node, or if it's a + * legacy/primary node, then it must be authenticated. + */ + DRM_AUTH = BIT(0), + /** + * @DRM_MASTER: + * + * This must be set for any ioctl which can change the modeset or + * display state. Userspace must call the ioctl through a primary node, + * while it is the active master. + * + * Note that read-only modeset ioctl can also be called by + * unauthenticated clients, or when a master is not the currently active + * one. + */ + DRM_MASTER = BIT(1), + /** + * @DRM_ROOT_ONLY: + * + * Anything that could potentially wreak a master file descriptor needs + * to have this flag set. Current that's only for the SETMASTER and + * DROPMASTER ioctl, which e.g. logind can call to force a non-behaving + * master (display compositor) into compliance. + * + * This is equivalent to callers with the SYSADMIN capability. + */ + DRM_ROOT_ONLY = BIT(2), + /** + * @DRM_UNLOCKED: + * + * Whether &drm_ioctl_desc.func should be called with the DRM BKL held + * or not. Enforced as the default for all modern drivers, hence there + * should never be a need to set this flag. + * + * Do not use anywhere else than for the VBLANK_WAIT IOCTL, which is the + * only legacy IOCTL which needs this. + */ + DRM_UNLOCKED = BIT(4), + /** + * @DRM_RENDER_ALLOW: + * + * This is used for all ioctl needed for rendering only, for drivers + * which support render nodes. This should be all new render drivers, + * and hence it should be always set for any ioctl with DRM_AUTH set. + * Note though that read-only query ioctl might have this set, but have + * not set DRM_AUTH because they do not require authentication. + */ + DRM_RENDER_ALLOW = BIT(5), +}; + +/** + * struct drm_ioctl_desc - DRM driver ioctl entry + * @cmd: ioctl command number, without flags + * @flags: a bitmask of &enum drm_ioctl_flags + * @func: handler for this ioctl + * @name: user-readable name for debug output + * + * For convenience it's easier to create these using the DRM_IOCTL_DEF_DRV() + * macro. + */ +struct drm_ioctl_desc { + unsigned int cmd; + enum drm_ioctl_flags flags; + drm_ioctl_t *func; + const char *name; +}; + +/** + * DRM_IOCTL_DEF_DRV() - helper macro to fill out a &struct drm_ioctl_desc + * @ioctl: ioctl command suffix + * @_func: handler for the ioctl + * @_flags: a bitmask of &enum drm_ioctl_flags + * + * Small helper macro to create a &struct drm_ioctl_desc entry. The ioctl + * command number is constructed by prepending ``DRM_IOCTL\_`` and passing that + * to DRM_IOCTL_NR(). + */ +#define DRM_IOCTL_DEF_DRV(ioctl, _func, _flags) \ + [DRM_IOCTL_NR(DRM_IOCTL_##ioctl) - DRM_COMMAND_BASE] = { \ + .cmd = DRM_IOCTL_##ioctl, \ + .func = _func, \ + .flags = _flags, \ + .name = #ioctl \ + } + +long drm_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); +long drm_ioctl_kernel(struct file *, drm_ioctl_t, void *, u32); +#ifdef CONFIG_COMPAT +long drm_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); +#else +/* Let drm_compat_ioctl be assigned to .compat_ioctl unconditionally */ +#define drm_compat_ioctl NULL +#endif +bool drm_ioctl_flags(unsigned int nr, unsigned int *flags); + +int drm_noop(struct drm_device *dev, void *data, + struct drm_file *file_priv); +int drm_invalid_op(struct drm_device *dev, void *data, + struct drm_file *file_priv); + +#endif /* _DRM_IOCTL_H_ */ -- cgit v1.2.3